[Sun Aug 19 20:49:35 2012] Detection parameters:
  Position = (466.3, 222.9) = 18 55 27.61 -37 58 44.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 133.1 +/- 16.6
  Background counts = 44.8
  Rate = 0.004 +/- 0.0005

[Sun Aug 19 20:49:36 2012] Off-axis axis estimate = 13.34'
[Sun Aug 19 21:39:07 2012] Using EEF radius (= 13.10 ")to estimate initial spatial extent for simple fitting
[Sun Aug 19 21:39:07 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sun Aug 19 21:39:07 2012] Initial guess for spatial extent in simple fitting = 13.10"
[Sun Aug 19 21:39:07 2012] source mask rpix=3.0, npix_max = 49, mask sum = 42, frac = 0.852
[Sun Aug 19 21:39:07 2012] Giving source the simple spatial ID 7 for pass 0, mean size = 13.10"
[Sun Aug 19 22:09:21 2012] fullrun_mos2_xmm0165971901_pi300-10000_cl_pass0_src7.ximg exists
[Sun Aug 19 22:09:21 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0165971901_pi300-10000_cl_pass0_src7.csv
[Sun Aug 19 22:09:21 2012] fullrun_mos2_xmm0165971901_pi300-10000_cl_pass0_src7_1.ximg exists
[Sun Aug 19 22:09:21 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0165971901_pi300-10000_cl_pass0_src7.csv
[Sun Aug 19 22:09:21 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0165971901_pi300-10000_cl_pass0_src7_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0165971901_pi300-10000_cl_pass0_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Aug 19 22:09:21 2012] fullrun_mos2_xmm0165971901_pi300-10000_cl_pass0_tfrozen_src7.ximg exists
[Sun Aug 19 22:09:21 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0165971901_pi300-10000_cl_pass0_tfrozen_src7.csv
[Sun Aug 19 22:09:21 2012] fullrun_mos2_xmm0165971901_pi300-10000_cl_pass0_tfrozen_src7_1.ximg exists
[Sun Aug 19 22:09:21 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0165971901_pi300-10000_cl_pass0_tfrozen_src7.csv
[Sun Aug 19 22:09:21 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0165971901_pi300-10000_cl_pass0_tfrozen_src7_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0165971901_pi300-10000_cl_pass0_tfrozen_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Aug 19 22:09:30 2012] Warning: source 7 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 4 at 18.426382 pixels away
[Sun Aug 19 22:09:30 2012] Vigneting correction estimate = 1.000000
[Sun Aug 19 22:09:30 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Aug 19 22:09:30 2012] Assessing source extent using major
[Sun Aug 19 22:09:30 2012] Source does appear to be extended
[Sun Aug 19 22:09:30 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Aug 19 23:21:28 2012] Using EEF radius (= 13.10 ")to estimate initial spatial extent for simple fitting
[Sun Aug 19 23:21:28 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sun Aug 19 23:21:28 2012] Initial guess for spatial extent in simple fitting = 13.10"
[Sun Aug 19 23:21:28 2012] source mask rpix=3.0, npix_max = 49, mask sum = 42, frac = 0.852
[Sun Aug 19 23:21:28 2012] Giving source the simple spatial ID 7 for pass 1, mean size = 13.10"
[Sun Aug 19 23:55:56 2012] fullrun_mos2_xmm0165971901_pi300-10000_cl_pass1_src7.ximg exists
[Sun Aug 19 23:55:56 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0165971901_pi300-10000_cl_pass1_src7.csv
[Sun Aug 19 23:55:56 2012] fullrun_mos2_xmm0165971901_pi300-10000_cl_pass1_src7_1.ximg exists
[Sun Aug 19 23:55:56 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0165971901_pi300-10000_cl_pass1_src7.csv
[Sun Aug 19 23:55:56 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0165971901_pi300-10000_cl_pass1_src7_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0165971901_pi300-10000_cl_pass1_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Aug 19 23:55:56 2012] fullrun_mos2_xmm0165971901_pi300-10000_cl_pass1_tfrozen_src7.ximg exists
[Sun Aug 19 23:55:56 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0165971901_pi300-10000_cl_pass1_tfrozen_src7.csv
[Sun Aug 19 23:55:56 2012] fullrun_mos2_xmm0165971901_pi300-10000_cl_pass1_tfrozen_src7_1.ximg exists
[Sun Aug 19 23:55:56 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0165971901_pi300-10000_cl_pass1_tfrozen_src7.csv
[Sun Aug 19 23:55:56 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0165971901_pi300-10000_cl_pass1_tfrozen_src7_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0165971901_pi300-10000_cl_pass1_tfrozen_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Aug 19 23:56:08 2012] Spatial fit model total counts = -25.933000, observed total counts = 244.000000
[Sun Aug 19 23:56:08 2012] Poor agreement between spatial fit and data for source 4
It may help to tweak spatial fit manually
Not incorporating fit results
[Sun Aug 19 23:56:08 2012] Vigneting correction estimate = 1.000000
[Sun Aug 19 23:56:08 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Aug 19 23:56:08 2012] Assessing source extent using major
[Sun Aug 19 23:56:08 2012] Source does appear to be extended
[Sun Aug 19 23:56:08 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Aug 20 02:09:47 2012] XMMSAS src. selection expression = ellipse(40517.581116, 19345.834549, 652.500000, 652.500000, 0.000000, X, Y)
[Mon Aug 20 02:09:47 2012] Writing source region out to fullrun_mos2_xmm0165971901_pi300-10000_pass1_cl_src4_src.reg
[Mon Aug 20 02:09:47 2012] Extracting stamp from image fullrun_mos2_xmm0165971901_pi300-10000_cl_sm2.00.img.gz, (429, 185) - (504, 260)
[Mon Aug 20 02:09:47 2012] XMMSAS bgd. selection expression = annulus(40517.581116, 19345.834549, 1087.500000, 2175.000000, X, Y) && !ellipse(39556.330414, 17017.578293, 870.000000, 870.000000, 0.000000, X, Y)
[Mon Aug 20 02:09:47 2012] Writing fullrun_mos2_xmm0165971901_pi300-10000_pass1_cl_src4.gif
[Mon Aug 20 02:11:17 2012] Mean detx,y = (16495.45, 2712.92) 
[Mon Aug 20 02:11:20 2012] Setting backscal keywords in source and bgd. spectrum
[Mon Aug 20 02:11:39 2012] Binned source spectrum to 10 counts/bin
[Mon Aug 20 02:11:39 2012] Setting source spectrum file to fullrun_mos2_xmm0165971901_pi300-10000_pass1_cl_src4_src_b10.pi.gz
[Mon Aug 20 02:11:39 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0165971901_pi300-10000_pass1_cl_src4_bgd.pi.gz
[Mon Aug 20 02:21:20 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Mon Aug 20 02:21:20 2012] rmf not generated due to insufficient counts
[Mon Aug 20 02:23:43 2012] Updating aperture counts using extracted products
[Mon Aug 20 02:23:43 2012] Error reading totcts from fullrun_mos2_xmm0165971901_pi300-10000_pass1_cl_src4_src_b10.pi.gz
[Mon Aug 20 02:23:43 2012] Calculating source flux in energy range 0.30-8.00
[Mon Aug 20 02:23:43 2012] Using photon index=1.80, rate=0.00379, arf fullrun_mos2_xmm0165971901_pi300-10000_pass1_cl_src4.arf
[Mon Aug 20 02:23:43 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Aug 20 02:23:43 2012] Updating source flux to 1.7e-13
[Mon Aug 20 02:23:46 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting