[Mon May 21 10:27:01 2012] Detection parameters:
  Position = (313.1, 315.7) = 18 56 35.88 -37 54 36.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 18751.9 +/- 162.7
  Background counts = 16.9
  Rate = 0.6 +/- 0.005

[Mon May 21 10:27:02 2012] Off-axis axis estimate = 1.64'
[Mon May 21 11:56:21 2012] Using EEF radius (= 7.25 ")to estimate initial spatial extent for simple fitting
[Mon May 21 11:56:21 2012] Initial guess for spatial extent in simple fitting = 7.25"
[Mon May 21 11:56:21 2012] source mask rpix=1.7, npix_max = 18, mask sum = 16, frac = 0.852
[Mon May 21 11:56:21 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 7.25"
[Mon May 21 12:47:13 2012] fullrun_mos2_xmm0165971601_pi300-10000_cl_pass0_src1.ximg exists
[Mon May 21 12:47:13 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0165971601_pi300-10000_cl_pass0_src1.csv
[Mon May 21 12:47:13 2012] fullrun_mos2_xmm0165971601_pi300-10000_cl_pass0_src1_1.ximg exists
[Mon May 21 12:47:13 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0165971601_pi300-10000_cl_pass0_src1.csv
[Mon May 21 12:47:13 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0165971601_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0165971601_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 21 12:47:13 2012] fullrun_mos2_xmm0165971601_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Mon May 21 12:47:13 2012] fullrun_mos2_xmm0165971601_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Mon May 21 12:47:13 2012] Fit fullrun_mos2_xmm0165971601_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Mon May 21 12:47:30 2012] Spatial fit model total counts = 17031.300000, observed total counts = 16786.000000
[Mon May 21 12:47:30 2012] Offset between fit and detection position for source 1 = 0.250174 pixels
[Mon May 21 12:47:30 2012] 16991.560000 total counts/ 4120.860000 bgd. counts: snr = 200.497166
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.250174 pixels
  Position = (312.9, 315.5) = 18 56 35.94 -37 54 36.2
  Extent = 5.3 (5.2-5.4)", rotation angle = 0
  Source counts = 12870.7 +/- 130.4
  Background counts = 4120.9
  Rate = 0.4 +/- 0.004
[Mon May 21 12:47:30 2012] Vigneting correction estimate = 1.000000
[Mon May 21 12:47:30 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon May 21 12:47:30 2012] Assessing source extent using major axis lower bound
[Mon May 21 12:47:30 2012] Source does appear to be extended
[Mon May 21 12:47:30 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon May 21 13:18:01 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Mon May 21 13:18:01 2012] Initial guess for spatial extent in simple fitting = 5.32"
[Mon May 21 13:18:01 2012] source mask rpix=1.2, npix_max = 11, mask sum = 12, frac = 1.011
[Mon May 21 13:18:01 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 5.32"
[Mon May 21 13:48:23 2012] fullrun_mos2_xmm0165971601_pi300-10000_cl_pass1_src1.ximg exists
[Mon May 21 13:48:23 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0165971601_pi300-10000_cl_pass1_src1.csv
[Mon May 21 13:48:23 2012] fullrun_mos2_xmm0165971601_pi300-10000_cl_pass1_src1_1.ximg exists
[Mon May 21 13:48:23 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0165971601_pi300-10000_cl_pass1_src1.csv
[Mon May 21 13:48:23 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0165971601_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0165971601_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 21 13:48:23 2012] fullrun_mos2_xmm0165971601_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Mon May 21 13:48:23 2012] fullrun_mos2_xmm0165971601_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Mon May 21 13:48:23 2012] Fit fullrun_mos2_xmm0165971601_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Mon May 21 13:48:35 2012] Spatial fit model total counts = 17037.000000, observed total counts = 16806.000000
[Mon May 21 13:48:35 2012] Offset between fit and detection position for source 1 = 0.012959 pixels
[Mon May 21 13:48:35 2012] 17077.200000 total counts/ 4131.800000 bgd. counts: snr = 201.393676
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.012959 pixels
  Position = (312.9, 315.5) = 18 56 35.94 -37 54 36.2
  Extent = 5.4 (5.3-5.4)", rotation angle = 0
  Source counts = 12945.4 +/- 130.7
  Background counts = 4131.8
  Rate = 0.4 +/- 0.004
[Mon May 21 13:48:35 2012] Vigneting correction estimate = 1.000000
[Mon May 21 13:48:35 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon May 21 13:48:35 2012] Assessing source extent using major axis lower bound
[Mon May 21 13:48:35 2012] Source does appear to be extended
[Mon May 21 13:48:35 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon May 21 14:50:14 2012] Counts = 12945.400000, rescaling region sizes by 3.000000
[Mon May 21 14:50:14 2012] XMMSAS src. selection expression = ellipse(27173.842500, 27402.999800, 964.675828, 964.675828, 0.000000, X, Y)
[Mon May 21 14:50:14 2012] Writing source region out to fullrun_mos2_xmm0165971601_pi300-10000_pass1_cl_src1_src.reg
[Mon May 21 14:50:14 2012] Extracting stamp from image fullrun_mos2_xmm0165971601_pi300-10000_cl_sm2.00.img.gz, (257, 260) - (368, 371)
[Mon May 21 14:50:14 2012] XMMSAS bgd. selection expression = annulus(27173.842500, 27402.999800, 4823.379139, 9646.758278, X, Y) && !ellipse(17480.434860, 25896.961365, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34980.339630, 37903.216248, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36142.546844, 25544.179657, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19239.513014, 22882.879879, 519.347014, 332.655601, 78.909487, X, Y) && !ellipse(19912.833800, 32832.240000, 474.828814, 474.828814, 0.000000, X, Y) && !ellipse(17356.312241, 18451.919373, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27922.002655, 26563.400269, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28135.026276, 27429.292938, 870.000000, 870.000000, 0.000000, X, Y)
[Mon May 21 14:50:14 2012] Writing fullrun_mos2_xmm0165971601_pi300-10000_pass1_cl_src1.gif
[Mon May 21 14:50:24 2012] Mean detx,y = (173.37, 26.68) 
[Mon May 21 14:50:27 2012] Setting backscal keywords in source and bgd. spectrum
[Mon May 21 14:54:30 2012] Binned source spectrum to 10 counts/bin
[Mon May 21 14:54:30 2012] Setting source spectrum file to fullrun_mos2_xmm0165971601_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Mon May 21 14:54:30 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0165971601_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Mon May 21 15:16:27 2012] Updating aperture counts using extracted products
[Mon May 21 15:16:27 2012] Error reading totcts from fullrun_mos2_xmm0165971601_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Mon May 21 15:16:28 2012] Calculating source flux in energy range 0.30-8.00
[Mon May 21 15:16:28 2012] Using photon index=1.80, rate=0.391, arf fullrun_mos2_xmm0165971601_pi300-10000_pass1_cl_src1.arf
[Mon May 21 15:16:28 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon May 21 15:16:28 2012] Updating source flux to 3.9e-12
[Mon May 21 15:17:06 2012] Reading fit data from xmm0165971601/analysis//spectral/fullrun_mos2_xmm0165971601_pi300-10000_pass1_cl_src1_pl.csv
[Mon May 21 15:17:06 2012] Spectral fit parameter nH value = 1.26784e+21
[Mon May 21 15:17:06 2012] Spectral fit parameter PhoIndex value = 8.84368
[Mon May 21 15:17:06 2012] Failed to get F(0.3-8.0) from xmm0165971601/analysis//spectral/fullrun_mos2_xmm0165971601_pi300-10000_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Mon May 21 15:17:06 2012] Calculating source flux in energy range 0.30-8.00
[Mon May 21 15:17:06 2012] Using Nh = 1.3e+21, photon index=8.84, rate=0.391, arf fullrun_mos2_xmm0165971601_pi300-10000_pass1_cl_src1.arf
[Mon May 21 15:17:06 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon May 21 15:17:06 2012] Updating source flux to 2.8e-12