[Thu Nov 24 10:26:15 2011] Detection parameters:
  Position = (364.9, 388.6) = 12 56 43.39 22 6 50.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 31.6 +/- 7.0
  Background counts = 4.1
  Rate = 0.004 +/- 0.0008

[Thu Nov 24 10:26:16 2011] Off-axis axis estimate = 8.12'
[Thu Nov 24 10:36:06 2011] Using EEF radius (= 10.49 ")to estimate initial spatial extent for simple fitting
[Thu Nov 24 10:36:06 2011] Initial guess for spatial extent in simple fitting = 10.49"
[Thu Nov 24 10:36:06 2011] source mask rpix=2.4, npix_max = 33, mask sum = 17, frac = 0.501
[Thu Nov 24 10:36:06 2011] Giving source the simple spatial ID 6 for pass 0, mean size = 10.49"
[Thu Nov 24 10:55:54 2011] fullrun_mos1_xmm0165570101_pi300-10000_cl_pass0_src6.ximg exists
[Thu Nov 24 10:55:54 2011] fullrun_mos1_xmm0165570101_pi300-10000_cl_pass0_src6_1.ximg exists
[Thu Nov 24 10:55:54 2011] Fit fullrun_mos1_xmm0165570101_pi300-10000_cl_pass0_src6 appears to have run properly
[Thu Nov 24 10:55:54 2011] fullrun_mos1_xmm0165570101_pi300-10000_cl_pass0_tfrozen_src6.ximg exists
[Thu Nov 24 10:55:54 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0165570101_pi300-10000_cl_pass0_tfrozen_src6.csv
[Thu Nov 24 10:55:54 2011] fullrun_mos1_xmm0165570101_pi300-10000_cl_pass0_tfrozen_src6_1.ximg exists
[Thu Nov 24 10:55:54 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0165570101_pi300-10000_cl_pass0_tfrozen_src6.csv
[Thu Nov 24 10:55:54 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0165570101_pi300-10000_cl_pass0_tfrozen_src6_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0165570101_pi300-10000_cl_pass0_tfrozen_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Nov 24 11:17:01 2011] Spatial fit model total counts = 46.577700, observed total counts = 46.000000
[Thu Nov 24 11:17:01 2011] Offset between fit and detection position for source 3 = 0.250715 pixels
[Thu Nov 24 11:17:01 2011] 51.821300 total counts/ 25.848300 bgd. counts: snr = 5.108650
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 0.250715 pixels
  Position = (365.1, 388.8) = 12 56 43.33 22 6 50.2
  Extent = 5.5" x 4.2", rotation angle = 340
  Source counts = 26.0 +/- 7.2
  Background counts = 25.8
  Rate = 0.002 +/- 0.0005
[Thu Nov 24 11:17:01 2011] Vigneting correction estimate = 1.000000
[Thu Nov 24 11:17:01 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Nov 24 11:17:01 2011] Assessing source extent using major
[Thu Nov 24 11:17:01 2011] Source does appear to be extended
[Thu Nov 24 11:17:01 2011] Computing asymmetry using major and minor axis, asym = 1.31
[Thu Nov 24 11:22:33 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu Nov 24 11:22:33 2011] Initial guess for spatial extent in simple fitting = 4.83"
[Thu Nov 24 11:22:33 2011] source mask rpix=1.1, npix_max = 10, mask sum = 5, frac = 0.482
[Thu Nov 24 11:22:33 2011] Skipping simple spatial due to low active detector fraction
[Thu Nov 24 12:02:00 2011] Vigneting correction estimate = 1.000000
[Thu Nov 24 12:02:00 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Nov 24 12:02:00 2011] Assessing source extent using major
[Thu Nov 24 12:02:00 2011] Source does appear to be extended
[Thu Nov 24 12:02:00 2011] Computing asymmetry using major and minor axis, asym = 1.31
[Thu Nov 24 12:12:20 2011] XMMSAS src. selection expression = ellipse(31717.253452, 33776.506908, 328.231925, 251.459727, 340.418555, X, Y)
[Thu Nov 24 12:12:20 2011] Writing source region out to fullrun_mos1_xmm0165570101_pi300-10000_pass1_cl_src3_src.reg
[Thu Nov 24 12:12:20 2011] Extracting stamp from image fullrun_mos1_xmm0165570101_pi300-10000_cl_sm2.00.img.gz, (346, 370) - (384, 408)
[Thu Nov 24 12:12:20 2011] XMMSAS bgd. selection expression = annulus(31717.253452, 33776.506908, 547.053209, 1094.106417, X, Y) && !ellipse(32912.689620, 34984.104800, 759.809622, 343.068010, 61.717188, X, Y)
[Thu Nov 24 12:12:20 2011] Writing fullrun_mos1_xmm0165570101_pi300-10000_pass1_cl_src3.gif
[Thu Nov 24 12:13:47 2011] Mean detx,y = (4182.40, 6663.52) 
[Thu Nov 24 12:13:48 2011] Setting backscal keywords in source and bgd. spectrum
[Thu Nov 24 12:13:57 2011] Binned source spectrum to 10 counts/bin
[Thu Nov 24 12:13:57 2011] Setting source spectrum file to fullrun_mos1_xmm0165570101_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Thu Nov 24 12:13:57 2011] Setting bgd. spectrum file to fullrun_mos1_xmm0165570101_pi300-10000_pass1_cl_src3_bgd.pi.gz
[Thu Nov 24 12:23:01 2011] Not generating rmf since there are only 25 counts
[Thu Nov 24 12:23:01 2011] rmf not generated due to insufficient counts
[Thu Nov 24 12:31:36 2011] Updating aperture counts using extracted products
[Thu Nov 24 12:31:36 2011] Error reading totcts from fullrun_mos1_xmm0165570101_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Thu Nov 24 12:31:36 2011] Calculating source flux in energy range 0.30-8.00
[Thu Nov 24 12:31:36 2011] Using photon index=1.80, rate=0.00173, arf fullrun_mos1_xmm0165570101_pi300-10000_pass1_cl_src3.arf
[Thu Nov 24 12:31:36 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Nov 24 12:31:36 2011] Updating source flux to 3.1e-14
[Thu Nov 24 12:31:37 2011] Source 3 has fewer than 100.000000 counts, skipping spectral fitting