[Fri May 10 01:13:38 2013] Detection parameters:
  Position = (268.0, 260.0) = 23 23 38.00 58 48 3.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 68737.0 +/- 309.6
  Background counts = 389.4
  Rate = 8 +/- 0.04

[Fri May 10 01:13:45 2013] Off-axis axis estimate = 3.55'
[Fri May 10 01:25:20 2013] Using EEF radius (= 8.21 ")to estimate initial spatial extent for simple fitting
[Fri May 10 01:25:20 2013] Initial guess for spatial extent in simple fitting = 8.21"
[Fri May 10 01:25:20 2013] source mask rpix=1.9, npix_max = 22, mask sum = 16, frac = 0.702
[Fri May 10 01:25:20 2013] Giving source the simple spatial ID 1 for pass 0, mean size = 8.21"
[Fri May 10 17:39:12 2013] fullrun_pn_xmm0165560101_pi300-10000_cl_pass0_src1.ximg exists
[Fri May 10 17:39:12 2013] fullrun_pn_xmm0165560101_pi300-10000_cl_pass0_src1_1.ximg exists
[Fri May 10 17:39:12 2013] Fit fullrun_pn_xmm0165560101_pi300-10000_cl_pass0_src1 appears to have run properly
[Fri May 10 17:39:16 2013] fullrun_pn_xmm0165560101_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Fri May 10 17:39:16 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0165560101_pi300-10000_cl_pass0_tfrozen_src1.csv
[Fri May 10 17:39:16 2013] fullrun_pn_xmm0165560101_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Fri May 10 17:39:16 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0165560101_pi300-10000_cl_pass0_tfrozen_src1.csv
[Fri May 10 17:39:16 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0165560101_pi300-10000_cl_pass0_tfrozen_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0165560101_pi300-10000_cl_pass0_tfrozen_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 13 11:09:15 2013] Spatial fit model total counts = 134807.000000, observed total counts = 147384.000000
[Mon May 13 11:09:15 2013] Offset between fit and detection position for source 1 = 1.274873 pixels
[Mon May 13 11:09:15 2013] 136053.000000 total counts/ 25600.000000 bgd. counts: snr = 690.331250
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 1.274873 pixels
  Position = (267.8, 258.8) = 23 23 38.09 58 47 58.2
  Extent = 16.4 (16.4-32.8)" x 15.2 (15.2-15.2)", rotation angle = 88 (88-88) degrees
  Source counts = 110453.0 +/- 368.9
  Background counts = 25600.0
  Rate = 1e+01 +/- 0.04
[Mon May 13 11:09:15 2013] Vigneting correction estimate = 1.000000
[Mon May 13 11:09:15 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon May 13 11:09:15 2013] Assessing source extent using major axis lower bound
[Mon May 13 11:09:15 2013] Source does appear to be extended
[Mon May 13 11:09:15 2013] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 1.08
[Mon May 13 11:09:45 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Mon May 13 11:09:45 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Mon May 13 11:09:45 2013] Initial guess for spatial extent in simple fitting = 15.80"
[Mon May 13 11:09:45 2013] source mask rpix=3.6, npix_max = 68, mask sum = 64, frac = 0.937
[Mon May 13 11:09:45 2013] Giving source the simple spatial ID 1 for pass 1, mean size = 15.80"
[Mon May 13 19:46:58 2013] fullrun_pn_xmm0165560101_pi300-10000_cl_pass1_src1.ximg exists
[Mon May 13 19:46:59 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0165560101_pi300-10000_cl_pass1_src1.csv
[Mon May 13 19:46:59 2013] fullrun_pn_xmm0165560101_pi300-10000_cl_pass1_src1_1.ximg exists
[Mon May 13 19:46:59 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0165560101_pi300-10000_cl_pass1_src1.csv
[Mon May 13 19:46:59 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0165560101_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0165560101_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 13 19:46:59 2013] fullrun_pn_xmm0165560101_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Mon May 13 19:46:59 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0165560101_pi300-10000_cl_pass1_tfrozen_src1.csv
[Mon May 13 19:46:59 2013] fullrun_pn_xmm0165560101_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Mon May 13 19:46:59 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0165560101_pi300-10000_cl_pass1_tfrozen_src1.csv
[Mon May 13 19:46:59 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0165560101_pi300-10000_cl_pass1_tfrozen_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0165560101_pi300-10000_cl_pass1_tfrozen_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat May 18 06:12:04 2013] Warning, spatial fit 1 centroid is now closest to src. 8
[Sat May 18 06:12:04 2013] Vigneting correction estimate = 1.000000
[Sat May 18 06:12:04 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat May 18 06:12:04 2013] Assessing source extent using major axis lower bound
[Sat May 18 06:12:04 2013] Source does appear to be extended
[Sat May 18 06:12:04 2013] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 1.08
[Sat May 18 06:12:30 2013] Counts = 110453.000000, rescaling region sizes by 3.000000
[Sat May 18 06:12:30 2013] XMMSAS src. selection expression = ellipse(23249.663740, 22463.375800, 2954.160085, 2734.200079, 88.156420, X, Y)
[Sat May 18 06:12:30 2013] Writing source region out to fullrun_pn_xmm0165560101_pi300-10000_pass1_cl_src1_src.reg
[Sat May 18 06:12:30 2013] Extracting stamp from image fullrun_pn_xmm0165560101_pi300-10000_cl_sm2.00.img.gz, (98, 89) - (438, 429)
[Sat May 18 06:12:30 2013] XMMSAS bgd. selection expression = annulus(23249.663740, 22463.375800, 14770.800425, 29541.600850, X, Y) && !ellipse(27280.351105, 22739.311127, 2610.000000, 2610.000000, 0.000000, X, Y) && !ellipse(25840.396600, 25338.848000, 6425.568185, 4887.576141, 352.545030, X, Y) && !ellipse(26796.426200, 24761.020800, 3408.600098, 3408.600098, 358.643000, X, Y) && !ellipse(24926.016600, 25400.788400, 3338.904096, 3338.904096, 359.429000, X, Y) && !ellipse(23093.125641, 24538.029755, 2610.000000, 2610.000000, 0.000000, X, Y) && !ellipse(26321.181946, 24104.999786, 2610.000000, 2610.000000, 0.000000, X, Y) && !ellipse(22440.094000, 23854.084200, 3881.736112, 3881.736112, 0.000000, X, Y) && !ellipse(25604.475372, 23268.113312, 2610.000000, 2610.000000, 0.000000, X, Y) && !ellipse(26745.253845, 23460.106445, 2610.000000, 2610.000000, 0.000000, X, Y) && !ellipse(21784.035568, 24594.746490, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25390.161407, 22070.357910, 2610.000000, 2610.000000, 0.000000, X, Y) && !ellipse(26053.050537, 21683.658203, 2610.000000, 2610.000000, 0.000000, X, Y) && !ellipse(26206.633600, 20526.870400, 720.372821, 422.231212, 356.600800, X, Y) && !ellipse(25431.132200, 21590.307800, 3972.048114, 3972.048114, 0.000000, X, Y) && !ellipse(23964.332000, 25031.401200, 3555.312102, 3267.408094, 139.464700, X, Y) && !ellipse(33838.000000, 32283.238739, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23458.258545, 27606.266571, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27321.642120, 19761.144852, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34795.002655, 33353.892578, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26622.276000, 27456.708000, 1191.584034, 1191.584034, 0.000000, X, Y) && !ellipse(22823.464935, 27694.254242, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22090.743225, 27332.721558, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28940.814392, 26968.409058, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25790.138916, 19094.236008, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(14460.586000, 13453.678000, 2088.336060, 2088.336060, 0.000000, X, Y) && !ellipse(15330.698000, 14371.924000, 2037.360059, 2037.360059, 0.000000, X, Y) && !ellipse(21806.202000, 21105.838000, 1506.992043, 1506.992043, 0.000000, X, Y) && !ellipse(23094.796000, 18691.574000, 1495.848043, 1495.848043, 0.000000, X, Y)
[Sat May 18 06:12:30 2013] Writing fullrun_pn_xmm0165560101_pi300-10000_pass1_cl_src1.gif
[Sat May 18 06:13:27 2013] Mean detx,y = (-1430.36, -2026.58) 
[Sat May 18 06:13:35 2013] Setting backscal keywords in source and bgd. spectrum
[Sat May 18 06:25:49 2013] Binned source spectrum to 10 counts/bin
[Sat May 18 06:25:50 2013] Setting source spectrum file to fullrun_pn_xmm0165560101_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Sat May 18 06:25:50 2013] Setting bgd. spectrum file to fullrun_pn_xmm0165560101_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Tue May 21 05:13:52 2013] Updating aperture counts using extracted products
[Tue May 21 05:13:52 2013] Total counts from fullrun_pn_xmm0165560101_pi300-10000_pass1_cl_src1_src_b10.pi.gz = 629794.00
[Tue May 21 05:13:53 2013] Total counts from fullrun_pn_xmm0165560101_pi300-10000_pass1_cl_src1_bgd.pi.gz = 22899.00
[Tue May 21 05:13:53 2013] Got source and background scale factors 19842410.000000, 169841034.000000
[Tue May 21 05:13:53 2013] User source parameters:
  Position = (267.8, 258.8) = 23 23 38.09 58 47 58.2
  Extent = 16.4 (16.4-32.8)" x 15.2 (15.2-15.2)", rotation angle = 88 (88-88) degrees
  Source aperture counts = 627118.7 +/- 794.6
  Background aperture counts = 2675.3
  Rate = 7e+01 +/- 0.08

[Tue May 21 05:14:08 2013] Calculating source flux in energy range 0.30-8.00
[Tue May 21 05:14:08 2013] Using photon index=1.80, rate=11.5, arf fullrun_pn_xmm0165560101_pi300-10000_pass1_cl_src1.arf
[Tue May 21 05:14:08 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Tue May 21 05:14:08 2013] Updating source flux to 5.9e-11
[Tue May 21 05:15:29 2013] xmm0165560101/analysis//spectral/fullrun_pn_xmm0165560101_pi300-10000_pass1_cl_src1_pl.csv not found, spectral fit skipped or did not complete