[Fri May 10 01:13:47 2013] Detection parameters:
  Position = (351.5, 259.1) = 23 22 51.21 58 48 3.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 132.1 +/- 18.3
  Background counts = 102.8
  Rate = 0.01 +/- 0.002

[Fri May 10 01:13:50 2013] Off-axis axis estimate = 4.79'
[Fri May 10 17:39:20 2013] Using EEF radius (= 8.82 ")to estimate initial spatial extent for simple fitting
[Fri May 10 17:39:20 2013] Initial guess for spatial extent in simple fitting = 8.82"
[Fri May 10 17:39:20 2013] source mask rpix=2.0, npix_max = 25, mask sum = 19, frac = 0.743
[Fri May 10 17:39:20 2013] Giving source the simple spatial ID 25 for pass 0, mean size = 8.82"
[Sun May 12 23:34:43 2013] fullrun_mos1_xmm0165560101_pi300-10000_cl_pass0_src25.ximg exists
[Sun May 12 23:34:43 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0165560101_pi300-10000_cl_pass0_src25.csv
[Sun May 12 23:34:43 2013] fullrun_mos1_xmm0165560101_pi300-10000_cl_pass0_src25_1.ximg exists
[Sun May 12 23:34:43 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0165560101_pi300-10000_cl_pass0_src25.csv
[Sun May 12 23:34:43 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0165560101_pi300-10000_cl_pass0_src25_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0165560101_pi300-10000_cl_pass0_src25.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May 12 23:34:44 2013] fullrun_mos1_xmm0165560101_pi300-10000_cl_pass0_tfrozen_src25.ximg exists
[Sun May 12 23:34:44 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0165560101_pi300-10000_cl_pass0_tfrozen_src25.csv
[Sun May 12 23:34:44 2013] fullrun_mos1_xmm0165560101_pi300-10000_cl_pass0_tfrozen_src25_1.ximg exists
[Sun May 12 23:34:44 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0165560101_pi300-10000_cl_pass0_tfrozen_src25.csv
[Sun May 12 23:34:44 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0165560101_pi300-10000_cl_pass0_tfrozen_src25_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0165560101_pi300-10000_cl_pass0_tfrozen_src25.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 13 11:09:26 2013] Spatial fit model total counts = 3236830.000000, observed total counts = 1096.000000
[Mon May 13 11:09:26 2013] Poor agreement between spatial fit and data for source 22
It may help to tweak spatial fit manually
Not incorporating fit results
[Mon May 13 11:09:26 2013] Spatial fit model total counts = 179743.000000, observed total counts = 1267.000000
[Mon May 13 11:09:26 2013] Poor agreement between spatial fit and data for source 22
It may help to tweak spatial fit manually
Not incorporating fit results
[Mon May 13 11:09:26 2013] Vigneting correction estimate = 1.000000
[Mon May 13 11:09:26 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon May 13 11:09:26 2013] Assessing source extent using major
[Mon May 13 11:09:26 2013] Source does appear to be extended
[Mon May 13 11:09:26 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon May 13 11:09:26 2013] Deleting source due to low Poisson probability 0.8