[Fri May 10 01:13:47 2013] Detection parameters:
  Position = (246.2, 289.8) = 23 23 50.19 58 50 15.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 5643.4 +/- 94.8
  Background counts = 169.3
  Rate = 0.4 +/- 0.007

[Fri May 10 01:13:50 2013] Off-axis axis estimate = 3.84'
[Fri May 10 17:39:20 2013] Using EEF radius (= 8.35 ")to estimate initial spatial extent for simple fitting
[Fri May 10 17:39:20 2013] Initial guess for spatial extent in simple fitting = 8.35"
[Fri May 10 17:39:20 2013] source mask rpix=1.9, npix_max = 23, mask sum = 24, frac = 1.026
[Fri May 10 17:39:20 2013] Giving source the simple spatial ID 11 for pass 0, mean size = 8.35"
[Sun May 12 23:34:42 2013] fullrun_mos1_xmm0165560101_pi300-10000_cl_pass0_src11.ximg exists
[Sun May 12 23:34:42 2013] fullrun_mos1_xmm0165560101_pi300-10000_cl_pass0_src11_1.ximg exists
[Sun May 12 23:34:42 2013] Fit fullrun_mos1_xmm0165560101_pi300-10000_cl_pass0_src11 appears to have run properly
[Sun May 12 23:34:44 2013] fullrun_mos1_xmm0165560101_pi300-10000_cl_pass0_tfrozen_src11.ximg exists
[Sun May 12 23:34:44 2013] fullrun_mos1_xmm0165560101_pi300-10000_cl_pass0_tfrozen_src11_1.ximg exists
[Sun May 12 23:34:44 2013] Fit fullrun_mos1_xmm0165560101_pi300-10000_cl_pass0_tfrozen_src11 appears to have run properly
[Mon May 13 11:09:26 2013] Spatial fit model total counts = 24684.500000, observed total counts = 24823.000000
[Mon May 13 11:09:26 2013] Offset between fit and detection position for source 11 = 6.624600 pixels
[Mon May 13 11:09:26 2013] 24935.310000 total counts/ 17384.200000 bgd. counts: snr = 57.270825
Spatial fit parameters:
  Offset between fit and detection position for source 11 = 6.624600 pixels
  Position = (250.0, 284.3) = 23 23 48.07 58 49 49.3
  Extent = 16.7 (16.7-33.4)" x 12.7 (12.1-13.4)", rotation angle = 44 (39-48) degrees
  Source counts = 7551.1 +/- 157.9
  Background counts = 17384.2
  Rate = 0.5 +/- 0.01
[Mon May 13 11:09:26 2013] Vigneting correction estimate = 1.000000
[Mon May 13 11:09:26 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon May 13 11:09:26 2013] Assessing source extent using major axis lower bound
[Mon May 13 11:09:26 2013] Source does appear to be extended
[Mon May 13 11:09:26 2013] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 1.24
[Mon May 13 19:47:00 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Mon May 13 19:47:00 2013] Initial guess for spatial extent in simple fitting = 14.72"
[Mon May 13 19:47:00 2013] source mask rpix=3.4, npix_max = 60, mask sum = 63, frac = 1.044
[Mon May 13 19:47:00 2013] Giving source the simple spatial ID 11 for pass 1, mean size = 14.72"
[Tue May 14 01:55:37 2013] fullrun_mos1_xmm0165560101_pi300-10000_cl_pass1_src11.ximg exists
[Tue May 14 01:55:37 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0165560101_pi300-10000_cl_pass1_src11.csv
[Tue May 14 01:55:37 2013] fullrun_mos1_xmm0165560101_pi300-10000_cl_pass1_src11_1.ximg exists
[Tue May 14 01:55:37 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0165560101_pi300-10000_cl_pass1_src11.csv
[Tue May 14 01:55:37 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0165560101_pi300-10000_cl_pass1_src11_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0165560101_pi300-10000_cl_pass1_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May 14 01:55:38 2013] fullrun_mos1_xmm0165560101_pi300-10000_cl_pass1_tfrozen_src11.ximg exists
[Tue May 14 01:55:38 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0165560101_pi300-10000_cl_pass1_tfrozen_src11.csv
[Tue May 14 01:55:38 2013] fullrun_mos1_xmm0165560101_pi300-10000_cl_pass1_tfrozen_src11_1.ximg exists
[Tue May 14 01:55:38 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0165560101_pi300-10000_cl_pass1_tfrozen_src11.csv
[Tue May 14 01:55:38 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0165560101_pi300-10000_cl_pass1_tfrozen_src11_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0165560101_pi300-10000_cl_pass1_tfrozen_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat May 18 06:12:10 2013] Warning, spatial fit 11 centroid is now closest to src. 4
[Sat May 18 06:12:10 2013] Vigneting correction estimate = 1.000000
[Sat May 18 06:12:10 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat May 18 06:12:10 2013] Assessing source extent using major axis lower bound
[Sat May 18 06:12:10 2013] Source does appear to be extended
[Sat May 18 06:12:10 2013] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 1.24
[Sat May 18 22:28:41 2013] Counts = 7551.110000, rescaling region sizes by 2.000000
[Sat May 18 22:28:41 2013] XMMSAS src. selection expression = ellipse(21702.432000, 24687.242000, 2003.124058, 1529.544044, 43.748200, X, Y)
[Sat May 18 22:28:41 2013] Writing source region out to fullrun_mos1_xmm0165560101_pi300-10000_pass1_cl_src11_src.reg
[Sat May 18 22:28:41 2013] Extracting stamp from image fullrun_mos1_xmm0165560101_pi300-10000_cl_sm2.00.img.gz, (135, 169) - (365, 399)
[Sat May 18 22:28:41 2013] XMMSAS bgd. selection expression = annulus(21702.432000, 24687.242000, 6677.080192, 13354.160384, X, Y) && !ellipse(23407.104600, 22543.167400, 3938.880113, 3938.880113, 0.000000, X, Y) && !ellipse(25814.677800, 25307.001600, 6421.056185, 5799.480167, 3.966390, X, Y) && !ellipse(24891.394800, 25339.610600, 6675.168192, 6039.864174, 153.104300, X, Y) && !ellipse(23817.094000, 24938.122000, 7135.488205, 4894.920141, -0.000000, X, Y) && !ellipse(24037.819580, 22146.068726, 2610.000000, 2610.000000, 0.000000, X, Y) && !ellipse(22832.359283, 23270.797546, 2610.000000, 2610.000000, 0.000000, X, Y) && !ellipse(26565.139313, 25092.463593, 2610.000000, 2610.000000, 0.000000, X, Y) && !ellipse(26132.215546, 24312.697418, 2610.000000, 2610.000000, 0.000000, X, Y) && !ellipse(25325.520000, 23036.748000, 3745.440108, 3745.440108, 0.000000, X, Y) && !ellipse(24063.814000, 23880.392400, 3703.536107, 3703.536107, 0.000000, X, Y) && !ellipse(21952.798523, 27695.972046, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20038.386993, 26114.724213, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22614.060120, 28618.772614, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23379.603302, 28587.960999, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19938.474000, 18486.520000, 1684.808048, 1684.808048, 0.000000, X, Y)
[Sat May 18 22:28:41 2013] Writing fullrun_mos1_xmm0165560101_pi300-10000_pass1_cl_src11.gif
[Sun May 19 00:01:44 2013] Mean detx,y = (1965.37, 99.35) 
[Sun May 19 00:01:47 2013] Setting backscal keywords in source and bgd. spectrum
[Sun May 19 00:06:09 2013] Binned source spectrum to 10 counts/bin
[Sun May 19 00:06:10 2013] Setting source spectrum file to fullrun_mos1_xmm0165560101_pi300-10000_pass1_cl_src11_src_b10.pi.gz
[Sun May 19 00:06:10 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0165560101_pi300-10000_pass1_cl_src11_bgd.pi.gz
[Tue May 21 05:14:17 2013] Updating aperture counts using extracted products
[Tue May 21 05:14:17 2013] Total counts from fullrun_mos1_xmm0165560101_pi300-10000_pass1_cl_src11_src_b10.pi.gz = 271982.00
[Tue May 21 05:14:18 2013] Total counts from fullrun_mos1_xmm0165560101_pi300-10000_pass1_cl_src11_bgd.pi.gz = 83744.00
[Tue May 21 05:14:18 2013] Got source and background scale factors 7363332.000000, 330113113.000000
[Tue May 21 05:14:18 2013] User source parameters:
  Position = (250.0, 284.3) = 23 23 48.07 58 49 49.3
  Extent = 16.7 (16.7-33.4)" x 12.7 (12.1-13.4)", rotation angle = 44 (39-48) degrees
  Source aperture counts = 270114.0 +/- 522.5
  Background aperture counts = 1868.0
  Rate = 2e+01 +/- 0.03

[Tue May 21 05:14:21 2013] Calculating source flux in energy range 0.30-8.00
[Tue May 21 05:14:21 2013] Using photon index=1.80, rate=0.5, arf fullrun_mos1_xmm0165560101_pi300-10000_pass1_cl_src11.arf
[Tue May 21 05:14:21 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Tue May 21 05:14:21 2013] Updating source flux to 6e-12
[Tue May 21 05:14:48 2013] xmm0165560101/analysis//spectral/fullrun_mos1_xmm0165560101_pi300-10000_pass1_cl_src11_pl.csv not found, spectral fit skipped or did not complete