[Sun Sep 25 13:15:11 2011] Detection parameters:
  Position = (216.6, 94.9) = 8 11 37.56 -18 31 6.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 68.2 +/- 13.0
  Background counts = 23.5
  Rate = 0.003 +/- 0.0005

[Sun Sep 25 13:15:11 2011] Off-axis axis estimate = 15.90'
[Sun Sep 25 13:17:00 2011] Using EEF radius (= 14.38 ")to estimate initial spatial extent for simple fitting
[Sun Sep 25 13:17:00 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sun Sep 25 13:17:00 2011] Initial guess for spatial extent in simple fitting = 14.38"
[Sun Sep 25 13:17:00 2011] source mask rpix=3.3, npix_max = 57, mask sum = 56, frac = 0.967
[Sun Sep 25 13:17:00 2011] Giving source the simple spatial ID 38 for pass 0, mean size = 14.38"
[Sun Sep 25 13:52:58 2011] fullrun_pn_xmm0164571501_pi300-10000_cl_pass0_src38.ximg exists
[Sun Sep 25 13:52:58 2011] fullrun_pn_xmm0164571501_pi300-10000_cl_pass0_src38_1.ximg exists
[Sun Sep 25 13:52:58 2011] Fit fullrun_pn_xmm0164571501_pi300-10000_cl_pass0_src38 appears to have run properly
[Sun Sep 25 13:52:58 2011] fullrun_pn_xmm0164571501_pi300-10000_cl_pass0_tfrozen_src38.ximg exists
[Sun Sep 25 13:52:58 2011] fullrun_pn_xmm0164571501_pi300-10000_cl_pass0_tfrozen_src38_1.ximg exists
[Sun Sep 25 13:52:58 2011] Fit fullrun_pn_xmm0164571501_pi300-10000_cl_pass0_tfrozen_src38 appears to have run properly
[Sun Sep 25 14:37:26 2011] Spatial fit model total counts = 372.620000, observed total counts = 383.000000
[Sun Sep 25 14:37:26 2011] Offset between fit and detection position for source 39 = 2.198144 pixels
[Sun Sep 25 14:37:26 2011] 390.340800 total counts/ 25.283800 bgd. counts: snr = 72.600483
Spatial fit parameters:
  Offset between fit and detection position for source 39 = 2.198144 pixels
  Position = (218.2, 93.4) = 8 11 37.07 -18 31 15.0
  Extent = 25.1 (18.6-28.8)", rotation angle = 0
  Source counts = 365.1 +/- 19.8
  Background counts = 25.3
  Rate = 0.01 +/- 0.0008
[Sun Sep 25 14:37:26 2011] Vigneting correction estimate = 1.000000
[Sun Sep 25 14:37:26 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Sep 25 14:37:26 2011] Assessing source extent using major axis lower bound
[Sun Sep 25 14:37:26 2011] Source does appear to be extended
[Sun Sep 25 14:37:26 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Sep 25 14:37:43 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun Sep 25 14:37:43 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sun Sep 25 14:37:43 2011] Initial guess for spatial extent in simple fitting = 25.07"
[Sun Sep 25 14:37:43 2011] source mask rpix=5.8, npix_max = 156, mask sum = 145, frac = 0.924
[Sun Sep 25 14:37:43 2011] Giving source the simple spatial ID 37 for pass 1, mean size = 25.07"
[Sun Sep 25 15:09:10 2011] fullrun_pn_xmm0164571501_pi300-10000_cl_pass1_src37.ximg exists
[Sun Sep 25 15:09:10 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0164571501_pi300-10000_cl_pass1_src37.csv
[Sun Sep 25 15:09:10 2011] fullrun_pn_xmm0164571501_pi300-10000_cl_pass1_src37_1.ximg exists
[Sun Sep 25 15:09:10 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0164571501_pi300-10000_cl_pass1_src37.csv
[Sun Sep 25 15:09:10 2011] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0164571501_pi300-10000_cl_pass1_src37_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0164571501_pi300-10000_cl_pass1_src37.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Sep 25 15:09:10 2011] fullrun_pn_xmm0164571501_pi300-10000_cl_pass1_tfrozen_src37.ximg exists
[Sun Sep 25 15:09:10 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0164571501_pi300-10000_cl_pass1_tfrozen_src37.csv
[Sun Sep 25 15:09:10 2011] fullrun_pn_xmm0164571501_pi300-10000_cl_pass1_tfrozen_src37_1.ximg exists
[Sun Sep 25 15:09:10 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0164571501_pi300-10000_cl_pass1_tfrozen_src37.csv
[Sun Sep 25 15:09:10 2011] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0164571501_pi300-10000_cl_pass1_tfrozen_src37_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0164571501_pi300-10000_cl_pass1_tfrozen_src37.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Sep 25 15:47:39 2011] Warning, spatial fit 37 centroid is now closest to src. 37
[Sun Sep 25 15:47:39 2011] Vigneting correction estimate = 1.000000
[Sun Sep 25 15:47:39 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Sep 25 15:47:39 2011] Assessing source extent using major axis lower bound
[Sun Sep 25 15:47:39 2011] Source does appear to be extended
[Sun Sep 25 15:47:39 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Sep 25 15:47:53 2011] XMMSAS src. selection expression = ellipse(18934.356600, 8080.638000, 1504.014043, 1504.014043, 0.000000, X, Y)
[Sun Sep 25 15:47:53 2011] Writing source region out to fullrun_pn_xmm0164571501_pi300-10000_pass1_cl_src39_src.reg
[Sun Sep 25 15:47:53 2011] Extracting stamp from image fullrun_pn_xmm0164571501_pi300-10000_cl_sm2.00.img.gz, (132, 7) - (305, 180)
[Sun Sep 25 15:47:53 2011] XMMSAS bgd. selection expression = annulus(18934.356600, 8080.638000, 2506.690072, 5013.380144, X, Y) && !ellipse(22711.425800, 12289.173500, 350.044010, 350.044010, 0.000000, X, Y) && !ellipse(23994.287720, 13520.463974, 870.000000, 870.000000, 0.000000, X, Y)
[Sun Sep 25 15:47:53 2011] Writing fullrun_pn_xmm0164571501_pi300-10000_pass1_cl_src39.gif
[Sun Sep 25 16:01:23 2011] Mean detx,y = (7379.78, -15291.47) 
[Sun Sep 25 16:01:25 2011] Setting backscal keywords in source and bgd. spectrum
[Sun Sep 25 16:02:12 2011] Binned source spectrum to 10 counts/bin
[Sun Sep 25 16:02:13 2011] Setting source spectrum file to fullrun_pn_xmm0164571501_pi300-10000_pass1_cl_src39_src_b10.pi.gz
[Sun Sep 25 16:02:13 2011] Setting bgd. spectrum file to fullrun_pn_xmm0164571501_pi300-10000_pass1_cl_src39_bgd.pi.gz
[Sun Sep 25 16:49:25 2011] Updating aperture counts using extracted products
[Sun Sep 25 16:49:25 2011] Error reading totcts from fullrun_pn_xmm0164571501_pi300-10000_pass1_cl_src39_src_b10.pi.gz
[Sun Sep 25 16:49:25 2011] Calculating source flux in energy range 0.30-8.00
[Sun Sep 25 16:49:25 2011] Using photon index=1.80, rate=0.0145, arf fullrun_pn_xmm0164571501_pi300-10000_pass1_cl_src39.arf
[Sun Sep 25 16:49:25 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Sep 25 16:49:25 2011] Updating source flux to 1e-13