[Mon Nov 28 10:55:17 2011] Detection parameters:
  Position = (305.1, 319.8) = 14 8 17.16 -3 46 18.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 11076.9 +/- 124.6
  Background counts = 63.1
  Rate = 0.3 +/- 0.004

[Mon Nov 28 10:55:18 2011] Off-axis axis estimate = 1.62'
[Mon Nov 28 13:23:36 2011] Using EEF radius (= 7.24 ")to estimate initial spatial extent for simple fitting
[Mon Nov 28 13:23:36 2011] Initial guess for spatial extent in simple fitting = 7.24"
[Mon Nov 28 13:23:36 2011] source mask rpix=1.7, npix_max = 18, mask sum = 16, frac = 0.854
[Mon Nov 28 13:23:36 2011] Giving source the simple spatial ID 1 for pass 0, mean size = 7.24"
[Mon Nov 28 14:16:36 2011] fullrun_mos2_xmm0164571201_pi300-10000_cl_pass0_src1.ximg exists
[Mon Nov 28 14:16:36 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0164571201_pi300-10000_cl_pass0_src1.csv
[Mon Nov 28 14:16:36 2011] fullrun_mos2_xmm0164571201_pi300-10000_cl_pass0_src1_1.ximg exists
[Mon Nov 28 14:16:36 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0164571201_pi300-10000_cl_pass0_src1.csv
[Mon Nov 28 14:16:36 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0164571201_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0164571201_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Nov 28 14:16:37 2011] fullrun_mos2_xmm0164571201_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Mon Nov 28 14:16:37 2011] fullrun_mos2_xmm0164571201_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Mon Nov 28 14:16:37 2011] Fit fullrun_mos2_xmm0164571201_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Mon Nov 28 14:17:03 2011] Source 1 is offset by 5.960703 and -7.905426 pixels which is larger than
2 X fitted extent = 0.831940 x 0.831940, not incorporating fit results
[Mon Nov 28 14:17:03 2011] Vigneting correction estimate = 1.000000
[Mon Nov 28 14:17:03 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Nov 28 14:17:03 2011] Assessing source extent using major
[Mon Nov 28 14:17:03 2011] Source does appear to be extended
[Mon Nov 28 14:17:03 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Nov 28 16:24:22 2011] Using EEF radius (= 7.24 ")to estimate initial spatial extent for simple fitting
[Mon Nov 28 16:24:22 2011] Initial guess for spatial extent in simple fitting = 7.24"
[Mon Nov 28 16:24:22 2011] source mask rpix=1.7, npix_max = 18, mask sum = 16, frac = 0.854
[Mon Nov 28 16:24:22 2011] Giving source the simple spatial ID 1 for pass 1, mean size = 7.24"
[Mon Nov 28 17:13:14 2011] fullrun_mos2_xmm0164571201_pi300-10000_cl_pass1_src1.ximg exists
[Mon Nov 28 17:13:14 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0164571201_pi300-10000_cl_pass1_src1.csv
[Mon Nov 28 17:13:14 2011] fullrun_mos2_xmm0164571201_pi300-10000_cl_pass1_src1_1.ximg exists
[Mon Nov 28 17:13:14 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0164571201_pi300-10000_cl_pass1_src1.csv
[Mon Nov 28 17:13:14 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0164571201_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0164571201_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Nov 28 17:13:14 2011] fullrun_mos2_xmm0164571201_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Mon Nov 28 17:13:14 2011] fullrun_mos2_xmm0164571201_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Mon Nov 28 17:13:14 2011] Fit fullrun_mos2_xmm0164571201_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Mon Nov 28 17:13:38 2011] Spatial fit model total counts = 8701.010000, observed total counts = 8701.000000
[Mon Nov 28 17:13:38 2011] Offset between fit and detection position for source 1 = 0.257419 pixels
[Mon Nov 28 17:13:38 2011] 8640.070000 total counts/ 1817.850000 bgd. counts: snr = 160.009843
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.257419 pixels
  Position = (304.9, 319.6) = 14 8 17.22 -3 46 18.5
  Extent = 5.5 (5.4-5.6)", rotation angle = 0
  Source counts = 6822.2 +/- 93.0
  Background counts = 1817.8
  Rate = 0.3 +/- 0.004
[Mon Nov 28 17:13:38 2011] Vigneting correction estimate = 1.000000
[Mon Nov 28 17:13:38 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Nov 28 17:13:38 2011] Assessing source extent using major axis lower bound
[Mon Nov 28 17:13:38 2011] Source does appear to be extended
[Mon Nov 28 17:13:38 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Nov 28 19:32:02 2011] Counts = 6822.220000, rescaling region sizes by 2.000000
[Mon Nov 28 19:32:02 2011] XMMSAS src. selection expression = ellipse(26475.522800, 27756.862800, 662.715619, 662.715619, 0.000000, X, Y)
[Mon Nov 28 19:32:02 2011] Writing source region out to fullrun_mos2_xmm0164571201_pi300-10000_pass1_cl_src1_src.reg
[Mon Nov 28 19:32:02 2011] Extracting stamp from image fullrun_mos2_xmm0164571201_pi300-10000_cl_sm2.00.img.gz, (267, 282) - (343, 358)
[Mon Nov 28 19:32:02 2011] XMMSAS bgd. selection expression = annulus(26475.522800, 27756.862800, 2209.052064, 4418.104127, X, Y) && !ellipse(24809.546000, 30511.304000, 404.792012, 278.142408, 350.650380, X, Y) && !ellipse(29968.549289, 31855.073950, 456.283386, 363.417708, 31.263159, X, Y) && !ellipse(29220.421872, 25379.356512, 430.722262, 349.390153, 318.260701, X, Y) && !ellipse(25484.335297, 25018.605988, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22484.451850, 23904.567800, 350.283210, 350.283210, 0.000000, X, Y)
[Mon Nov 28 19:32:02 2011] Writing fullrun_mos2_xmm0164571201_pi300-10000_pass1_cl_src1.gif
[Mon Nov 28 19:32:08 2011] Mean detx,y = (77.54, -67.32) 
[Mon Nov 28 19:32:10 2011] Setting backscal keywords in source and bgd. spectrum
[Mon Nov 28 19:32:29 2011] Binned source spectrum to 10 counts/bin
[Mon Nov 28 19:32:30 2011] Setting source spectrum file to fullrun_mos2_xmm0164571201_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Mon Nov 28 19:32:30 2011] Setting bgd. spectrum file to fullrun_mos2_xmm0164571201_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Mon Nov 28 20:10:27 2011] Updating aperture counts using extracted products
[Mon Nov 28 20:10:27 2011] Error reading totcts from fullrun_mos2_xmm0164571201_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Mon Nov 28 20:10:28 2011] Calculating source flux in energy range 0.30-8.00
[Mon Nov 28 20:10:28 2011] Using photon index=1.80, rate=0.259, arf fullrun_mos2_xmm0164571201_pi300-10000_pass1_cl_src1.arf
[Mon Nov 28 20:10:28 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Nov 28 20:10:28 2011] Updating source flux to 2.8e-12
[Mon Nov 28 20:11:00 2011] Flag b found in src. 1 procflags, skipping spectral fitting
[Mon Nov 28 20:12:11 2011] Reading fit data from xmm0164571201/analysis//spectral/fullrun_mos2_xmm0164571201_pi300-10000_pass1_cl_src1_pl.csv
[Mon Nov 28 20:12:11 2011] Spectral fit parameter nH value = 4.91876e+20
[Mon Nov 28 20:12:11 2011] Spectral fit parameter PhoIndex value = 1.89063
[Mon Nov 28 20:12:11 2011] Failed to get F(0.3-8.0) from xmm0164571201/analysis//spectral/fullrun_mos2_xmm0164571201_pi300-10000_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Mon Nov 28 20:12:11 2011] Calculating source flux in energy range 0.30-8.00
[Mon Nov 28 20:12:11 2011] Using Nh = 4.9e+20, photon index=1.89, rate=0.259, arf fullrun_mos2_xmm0164571201_pi300-10000_pass1_cl_src1.arf
[Mon Nov 28 20:12:11 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Nov 28 20:12:11 2011] Updating source flux to 2.8e-12