[Mon Nov 28 10:54:31 2011] Detection parameters:
  Position = (305.0, 319.3) = 14 8 17.17 -3 46 17.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 10501.9 +/- 121.1
  Background counts = 54.1
  Rate = 0.3 +/- 0.004

[Mon Nov 28 10:54:32 2011] Off-axis axis estimate = 1.59'
[Mon Nov 28 12:42:36 2011] Using EEF radius (= 7.22 ")to estimate initial spatial extent for simple fitting
[Mon Nov 28 12:42:36 2011] Initial guess for spatial extent in simple fitting = 7.22"
[Mon Nov 28 12:42:36 2011] source mask rpix=1.7, npix_max = 18, mask sum = 16, frac = 0.857
[Mon Nov 28 12:42:36 2011] Giving source the simple spatial ID 1 for pass 0, mean size = 7.22"
[Mon Nov 28 13:23:36 2011] fullrun_mos1_xmm0164571201_pi300-10000_cl_pass0_src1.ximg exists
[Mon Nov 28 13:23:36 2011] fullrun_mos1_xmm0164571201_pi300-10000_cl_pass0_src1_1.ximg exists
[Mon Nov 28 13:23:36 2011] Fit fullrun_mos1_xmm0164571201_pi300-10000_cl_pass0_src1 appears to have run properly
[Mon Nov 28 13:23:36 2011] fullrun_mos1_xmm0164571201_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Mon Nov 28 13:23:36 2011] fullrun_mos1_xmm0164571201_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Mon Nov 28 13:23:36 2011] Fit fullrun_mos1_xmm0164571201_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Mon Nov 28 14:16:57 2011] Spatial fit model total counts = 8494.010000, observed total counts = 8494.000000
[Mon Nov 28 14:16:57 2011] Offset between fit and detection position for source 2 = 0.281256 pixels
[Mon Nov 28 14:16:57 2011] 8492.530000 total counts/ 1920.190000 bgd. counts: snr = 149.985032
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.281256 pixels
  Position = (304.9, 319.5) = 14 8 17.21 -3 46 18.8
  Extent = 5.3 (5.2-5.4)", rotation angle = 0
  Source counts = 6572.3 +/- 92.2
  Background counts = 1920.2
  Rate = 0.2 +/- 0.003
[Mon Nov 28 14:16:57 2011] Vigneting correction estimate = 1.000000
[Mon Nov 28 14:16:57 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Nov 28 14:16:57 2011] Assessing source extent using major axis lower bound
[Mon Nov 28 14:16:57 2011] Source does appear to be extended
[Mon Nov 28 14:16:57 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Nov 28 15:52:09 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Mon Nov 28 15:52:09 2011] Initial guess for spatial extent in simple fitting = 5.34"
[Mon Nov 28 15:52:09 2011] source mask rpix=1.2, npix_max = 11, mask sum = 12, frac = 1.006
[Mon Nov 28 15:52:09 2011] Giving source the simple spatial ID 1 for pass 1, mean size = 5.34"
[Mon Nov 28 16:24:22 2011] fullrun_mos1_xmm0164571201_pi300-10000_cl_pass1_src1.ximg exists
[Mon Nov 28 16:24:22 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0164571201_pi300-10000_cl_pass1_src1.csv
[Mon Nov 28 16:24:22 2011] fullrun_mos1_xmm0164571201_pi300-10000_cl_pass1_src1_1.ximg exists
[Mon Nov 28 16:24:22 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0164571201_pi300-10000_cl_pass1_src1.csv
[Mon Nov 28 16:24:22 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0164571201_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0164571201_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Nov 28 16:24:22 2011] fullrun_mos1_xmm0164571201_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Mon Nov 28 16:24:22 2011] fullrun_mos1_xmm0164571201_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Mon Nov 28 16:24:22 2011] Fit fullrun_mos1_xmm0164571201_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Mon Nov 28 17:13:31 2011] Spatial fit model total counts = 8505.750000, observed total counts = 8494.000000
[Mon Nov 28 17:13:31 2011] Offset between fit and detection position for source 2 = 0.000318 pixels
[Mon Nov 28 17:13:31 2011] 8504.300000 total counts/ 1927.220000 bgd. counts: snr = 149.819201
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.000318 pixels
  Position = (304.9, 319.5) = 14 8 17.21 -3 46 18.8
  Extent = 5.3 (5.2-5.4)", rotation angle = 0
  Source counts = 6577.1 +/- 92.2
  Background counts = 1927.2
  Rate = 0.2 +/- 0.003
[Mon Nov 28 17:13:31 2011] Vigneting correction estimate = 1.000000
[Mon Nov 28 17:13:31 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Nov 28 17:13:31 2011] Assessing source extent using major axis lower bound
[Mon Nov 28 17:13:31 2011] Source does appear to be extended
[Mon Nov 28 17:13:31 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Nov 28 19:05:42 2011] Counts = 6577.080000, rescaling region sizes by 2.000000
[Mon Nov 28 19:05:42 2011] XMMSAS src. selection expression = ellipse(26479.024880, 27751.725400, 639.078018, 639.078018, 0.000000, X, Y)
[Mon Nov 28 19:05:42 2011] Writing source region out to fullrun_mos1_xmm0164571201_pi300-10000_pass1_cl_src2_src.reg
[Mon Nov 28 19:05:42 2011] Extracting stamp from image fullrun_mos1_xmm0164571201_pi300-10000_cl_sm2.00.img.gz, (268, 283) - (342, 356)
[Mon Nov 28 19:05:42 2011] XMMSAS bgd. selection expression = annulus(26479.024880, 27751.725400, 2130.260061, 4260.520123, X, Y) && !ellipse(24836.752080, 30514.270400, 385.002411, 385.002411, 0.000000, X, Y) && !ellipse(29978.803406, 31752.503693, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29257.169098, 25368.496368, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25482.415400, 24961.880000, 302.461609, 302.461609, 0.000000, X, Y)
[Mon Nov 28 19:05:42 2011] Writing fullrun_mos1_xmm0164571201_pi300-10000_pass1_cl_src2.gif
[Mon Nov 28 19:05:46 2011] Mean detx,y = (141.50, -239.04) 
[Mon Nov 28 19:05:48 2011] Setting backscal keywords in source and bgd. spectrum
[Mon Nov 28 19:06:19 2011] Binned source spectrum to 10 counts/bin
[Mon Nov 28 19:06:19 2011] Setting source spectrum file to fullrun_mos1_xmm0164571201_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Mon Nov 28 19:06:19 2011] Setting bgd. spectrum file to fullrun_mos1_xmm0164571201_pi300-10000_pass1_cl_src2_bgd.pi.gz
[Mon Nov 28 20:10:26 2011] Updating aperture counts using extracted products
[Mon Nov 28 20:10:26 2011] Error reading totcts from fullrun_mos1_xmm0164571201_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Mon Nov 28 20:10:27 2011] Calculating source flux in energy range 0.30-8.00
[Mon Nov 28 20:10:27 2011] Using photon index=1.80, rate=0.235, arf fullrun_mos1_xmm0164571201_pi300-10000_pass1_cl_src2.arf
[Mon Nov 28 20:10:27 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Nov 28 20:10:27 2011] Updating source flux to 2.3e-12
[Mon Nov 28 20:11:00 2011] Reading fit data from xmm0164571201/analysis//spectral/fullrun_mos1_xmm0164571201_pi300-10000_pass1_cl_src2_pl.csv
[Mon Nov 28 20:11:00 2011] Spectral fit parameter nH value = 3.96804e+20
[Mon Nov 28 20:11:00 2011] Spectral fit parameter PhoIndex value = 1.8773
[Mon Nov 28 20:11:00 2011] Failed to get F(0.3-8.0) from xmm0164571201/analysis//spectral/fullrun_mos1_xmm0164571201_pi300-10000_pass1_cl_src2_pl.csv, possibly due to different flux energy range selected
[Mon Nov 28 20:11:00 2011] Calculating source flux in energy range 0.30-8.00
[Mon Nov 28 20:11:00 2011] Using Nh = 4e+20, photon index=1.88, rate=0.235, arf fullrun_mos1_xmm0164571201_pi300-10000_pass1_cl_src2.arf
[Mon Nov 28 20:11:00 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Nov 28 20:11:00 2011] Updating source flux to 2.3e-12