[Mon Nov 28 10:54:32 2011] Detection parameters:
  Position = (336.8, 292.1) = 14 8 7.93 -3 48 18.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 200.4 +/- 19.9
  Background counts = 51.6
  Rate = 0.007 +/- 0.0006

[Mon Nov 28 10:54:32 2011] Off-axis axis estimate = 2.82'
[Mon Nov 28 12:42:36 2011] Using EEF radius (= 7.84 ")to estimate initial spatial extent for simple fitting
[Mon Nov 28 12:42:36 2011] Initial guess for spatial extent in simple fitting = 7.84"
[Mon Nov 28 12:42:36 2011] source mask rpix=1.8, npix_max = 21, mask sum = 16, frac = 0.755
[Mon Nov 28 12:42:36 2011] Giving source the simple spatial ID 7 for pass 0, mean size = 7.84"
[Mon Nov 28 13:23:36 2011] fullrun_mos1_xmm0164571201_pi300-10000_cl_pass0_src7.ximg exists
[Mon Nov 28 13:23:36 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0164571201_pi300-10000_cl_pass0_src7.csv
[Mon Nov 28 13:23:36 2011] fullrun_mos1_xmm0164571201_pi300-10000_cl_pass0_src7_1.ximg exists
[Mon Nov 28 13:23:36 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0164571201_pi300-10000_cl_pass0_src7.csv
[Mon Nov 28 13:23:36 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0164571201_pi300-10000_cl_pass0_src7_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0164571201_pi300-10000_cl_pass0_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Nov 28 13:23:36 2011] fullrun_mos1_xmm0164571201_pi300-10000_cl_pass0_tfrozen_src7.ximg exists
[Mon Nov 28 13:23:36 2011] fullrun_mos1_xmm0164571201_pi300-10000_cl_pass0_tfrozen_src7_1.ximg exists
[Mon Nov 28 13:23:36 2011] Fit fullrun_mos1_xmm0164571201_pi300-10000_cl_pass0_tfrozen_src7 appears to have run properly
[Mon Nov 28 14:16:57 2011] Source 13 is offset by -7.361941 and 6.358096 pixels which is larger than
2 X fitted extent = 0.901090 x 0.901090, not incorporating fit results
[Mon Nov 28 14:16:57 2011] Vigneting correction estimate = 1.000000
[Mon Nov 28 14:16:57 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Nov 28 14:16:57 2011] Assessing source extent using major
[Mon Nov 28 14:16:57 2011] Source does appear to be extended
[Mon Nov 28 14:16:57 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Nov 28 15:52:09 2011] Using EEF radius (= 7.84 ")to estimate initial spatial extent for simple fitting
[Mon Nov 28 15:52:09 2011] Initial guess for spatial extent in simple fitting = 7.84"
[Mon Nov 28 15:52:09 2011] source mask rpix=1.8, npix_max = 21, mask sum = 16, frac = 0.755
[Mon Nov 28 15:52:09 2011] Giving source the simple spatial ID 7 for pass 1, mean size = 7.84"
[Mon Nov 28 16:24:22 2011] fullrun_mos1_xmm0164571201_pi300-10000_cl_pass1_src7.ximg exists
[Mon Nov 28 16:24:22 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0164571201_pi300-10000_cl_pass1_src7.csv
[Mon Nov 28 16:24:22 2011] fullrun_mos1_xmm0164571201_pi300-10000_cl_pass1_src7_1.ximg exists
[Mon Nov 28 16:24:22 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0164571201_pi300-10000_cl_pass1_src7.csv
[Mon Nov 28 16:24:22 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0164571201_pi300-10000_cl_pass1_src7_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0164571201_pi300-10000_cl_pass1_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Nov 28 16:24:22 2011] fullrun_mos1_xmm0164571201_pi300-10000_cl_pass1_tfrozen_src7.ximg exists
[Mon Nov 28 16:24:22 2011] fullrun_mos1_xmm0164571201_pi300-10000_cl_pass1_tfrozen_src7_1.ximg exists
[Mon Nov 28 16:24:22 2011] Fit fullrun_mos1_xmm0164571201_pi300-10000_cl_pass1_tfrozen_src7 appears to have run properly
[Mon Nov 28 17:13:31 2011] Source 13 is offset by -7.361941 and 6.358096 pixels which is larger than
2 X fitted extent = 0.901090 x 0.901090, not incorporating fit results
[Mon Nov 28 17:13:31 2011] Vigneting correction estimate = 1.000000
[Mon Nov 28 17:13:31 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Nov 28 17:13:31 2011] Assessing source extent using major
[Mon Nov 28 17:13:31 2011] Source does appear to be extended
[Mon Nov 28 17:13:31 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Nov 28 19:05:42 2011] XMMSAS src. selection expression = ellipse(29257.169098, 25368.496368, 652.500000, 652.500000, 0.000000, X, Y)
[Mon Nov 28 19:05:42 2011] Writing source region out to fullrun_mos1_xmm0164571201_pi300-10000_pass1_cl_src13_src.reg
[Mon Nov 28 19:05:42 2011] Extracting stamp from image fullrun_mos1_xmm0164571201_pi300-10000_cl_sm2.00.img.gz, (299, 255) - (374, 330)
[Mon Nov 28 19:05:42 2011] XMMSAS bgd. selection expression = annulus(29257.169098, 25368.496368, 1087.500000, 2175.000000, X, Y)
[Mon Nov 28 19:05:42 2011] Writing fullrun_mos1_xmm0164571201_pi300-10000_pass1_cl_src13.gif
[Mon Nov 28 19:09:38 2011] Mean detx,y = (-2986.34, 1604.63) 
[Mon Nov 28 19:09:40 2011] Setting backscal keywords in source and bgd. spectrum
[Mon Nov 28 19:09:58 2011] Binned source spectrum to 10 counts/bin
[Mon Nov 28 19:09:58 2011] Setting source spectrum file to fullrun_mos1_xmm0164571201_pi300-10000_pass1_cl_src13_src_b10.pi.gz
[Mon Nov 28 19:09:58 2011] Setting bgd. spectrum file to fullrun_mos1_xmm0164571201_pi300-10000_pass1_cl_src13_bgd.pi.gz
[Mon Nov 28 19:31:08 2011] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Mon Nov 28 19:31:08 2011] rmf not generated due to insufficient counts
[Mon Nov 28 20:10:26 2011] Updating aperture counts using extracted products
[Mon Nov 28 20:10:26 2011] Error reading totcts from fullrun_mos1_xmm0164571201_pi300-10000_pass1_cl_src13_src_b10.pi.gz
[Mon Nov 28 20:10:27 2011] Calculating source flux in energy range 0.30-8.00
[Mon Nov 28 20:10:27 2011] Using photon index=1.80, rate=0.00654, arf fullrun_mos1_xmm0164571201_pi300-10000_pass1_cl_src13.arf
[Mon Nov 28 20:10:27 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Nov 28 20:10:27 2011] Updating source flux to 6.9e-14
[Mon Nov 28 20:10:31 2011] Simple spatial fitting not done (or not done successfully), skipping spectral fitting