[Thu May 30 21:32:10 2013] Detection parameters:
  Position = (285.5, 229.5) = 18 41 8.54 5 28 52.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 30.0 +/- 7.7
  Background counts = 10.2
  Rate = 0.007 +/- 0.002

[Thu May 30 21:32:10 2013] Off-axis axis estimate = 5.08'
[Thu May 30 21:34:37 2013] Using EEF radius (= 8.97 ")to estimate initial spatial extent for simple fitting
[Thu May 30 21:34:37 2013] Initial guess for spatial extent in simple fitting = 8.97"
[Thu May 30 21:34:37 2013] source mask rpix=2.1, npix_max = 26, mask sum = 25, frac = 0.952
[Thu May 30 21:34:37 2013] Giving source the simple spatial ID 59 for pass 0, mean size = 8.97"
[Fri May 31 02:13:23 2013] fullrun_pn_xmm0164561201_pi300-10000_cl_pass0_src59.ximg exists
[Fri May 31 02:13:23 2013] fullrun_pn_xmm0164561201_pi300-10000_cl_pass0_src59_1.ximg exists
[Fri May 31 02:13:23 2013] Fit fullrun_pn_xmm0164561201_pi300-10000_cl_pass0_src59 appears to have run properly
[Fri May 31 02:13:25 2013] fullrun_pn_xmm0164561201_pi300-10000_cl_pass0_tfrozen_src59.ximg exists
[Fri May 31 02:13:25 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0164561201_pi300-10000_cl_pass0_tfrozen_src59.csv
[Fri May 31 02:13:25 2013] fullrun_pn_xmm0164561201_pi300-10000_cl_pass0_tfrozen_src59_1.ximg exists
[Fri May 31 02:13:25 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0164561201_pi300-10000_cl_pass0_tfrozen_src59.csv
[Fri May 31 02:13:25 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0164561201_pi300-10000_cl_pass0_tfrozen_src59_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0164561201_pi300-10000_cl_pass0_tfrozen_src59.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 31 18:44:50 2013] Spatial fit model total counts = 177.049000, observed total counts = 168.000000
[Fri May 31 18:44:50 2013] Offset between fit and detection position for source 60 = 0.253789 pixels
[Fri May 31 18:44:50 2013] 176.668800 total counts/ 126.636000 bgd. counts: snr = 4.446069
Spatial fit parameters:
  Offset between fit and detection position for source 60 = 0.253789 pixels
  Position = (285.8, 229.6) = 18 41 8.47 5 28 52.1
  Extent = 17.9 (17.9-35.9)", rotation angle = 130 (127-133) degrees
  Source counts = 50.0 +/- 13.3
  Background counts = 126.6
  Rate = 0.007 +/- 0.002
[Fri May 31 18:44:50 2013] Vigneting correction estimate = 1.000000
[Fri May 31 18:44:50 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May 31 18:44:50 2013] Assessing source extent using major axis lower bound
[Fri May 31 18:44:50 2013] Source does appear to be extended
[Fri May 31 18:44:50 2013] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 6.29
[Fri May 31 18:44:50 2013] Source is asymmetric
[Fri May 31 18:44:50 2013] Source is confused with source 59
[Fri May 31 18:46:11 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri May 31 18:46:11 2013] Initial guess for spatial extent in simple fitting = 10.09"
[Fri May 31 18:46:11 2013] source mask rpix=2.3, npix_max = 31, mask sum = 30, frac = 0.943
[Fri May 31 18:46:11 2013] Giving source the simple spatial ID 56 for pass 1, mean size = 10.09"
[Fri May 31 23:41:13 2013] fullrun_pn_xmm0164561201_pi300-10000_cl_pass1_src56.ximg exists
[Fri May 31 23:41:13 2013] fullrun_pn_xmm0164561201_pi300-10000_cl_pass1_src56_1.ximg exists
[Fri May 31 23:41:13 2013] Fit fullrun_pn_xmm0164561201_pi300-10000_cl_pass1_src56 appears to have run properly
[Fri May 31 23:41:15 2013] fullrun_pn_xmm0164561201_pi300-10000_cl_pass1_tfrozen_src56.ximg exists
[Fri May 31 23:41:15 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0164561201_pi300-10000_cl_pass1_tfrozen_src56.csv
[Fri May 31 23:41:15 2013] fullrun_pn_xmm0164561201_pi300-10000_cl_pass1_tfrozen_src56_1.ximg exists
[Fri May 31 23:41:15 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0164561201_pi300-10000_cl_pass1_tfrozen_src56.csv
[Fri May 31 23:41:15 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0164561201_pi300-10000_cl_pass1_tfrozen_src56_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0164561201_pi300-10000_cl_pass1_tfrozen_src56.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun  1 17:06:21 2013] Warning, spatial fit 56 centroid is now closest to src. 59
[Sat Jun  1 17:06:21 2013] Vigneting correction estimate = 1.000000
[Sat Jun  1 17:06:21 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun  1 17:06:21 2013] Assessing source extent using major axis lower bound
[Sat Jun  1 17:06:21 2013] Source does appear to be extended
[Sat Jun  1 17:06:21 2013] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 6.29
[Sat Jun  1 17:06:21 2013] Source is asymmetric
[Sat Jun  1 17:07:41 2013] XMMSAS src. selection expression = ellipse(24813.102800, 19927.743400, 1076.436031, 134.554204, 130.035900, X, Y)
[Sat Jun  1 17:07:41 2013] Writing source region out to fullrun_pn_xmm0164561201_pi300-10000_pass1_cl_src60_src.reg
[Sat Jun  1 17:07:41 2013] Extracting stamp from image fullrun_pn_xmm0164561201_pi300-10000_cl_sm2.00.img.gz, (224, 168) - (348, 291)
[Sat Jun  1 17:07:41 2013] XMMSAS bgd. selection expression = annulus(24813.102800, 19927.743400, 1794.060052, 3588.120103, X, Y) && !ellipse(24153.048980, 24769.032200, 1440.664041, 288.780808, 312.176800, X, Y) && !ellipse(23420.145599, 24054.373688, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29209.413800, 23347.718600, 1549.440045, 254.134407, 341.487000, X, Y) && !ellipse(29035.804000, 23297.473200, 1563.760045, 255.492007, 347.156500, X, Y) && !ellipse(27498.600400, 22927.089000, 1255.856036, 156.982405, 342.055200, X, Y) && !ellipse(26792.836400, 22682.286800, 1249.520036, 156.189604, 157.542000, X, Y) && !ellipse(25655.592000, 22274.368000, 1257.992036, 1257.992036, 0.000000, X, Y) && !ellipse(25177.764374, 21881.302567, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26743.090960, 21853.619800, 1304.376038, 163.047205, 323.736000, X, Y) && !ellipse(25766.675000, 21005.905190, 1557.520045, 197.615206, 315.079500, X, Y) && !ellipse(23617.706329, 20793.371124, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25206.136017, 20399.508148, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21626.405151, 16190.102570, 870.000000, 870.000000, 0.000000, X, Y)
[Sat Jun  1 17:07:41 2013] Writing fullrun_pn_xmm0164561201_pi300-10000_pass1_cl_src60.gif
[Sat Jun  1 17:57:18 2013] Mean detx,y = (-1328.89, 7621.11) 
[Sat Jun  1 17:57:22 2013] Setting backscal keywords in source and bgd. spectrum
[Sat Jun  1 17:58:09 2013] Binned source spectrum to 10 counts/bin
[Sat Jun  1 17:58:09 2013] Setting source spectrum file to fullrun_pn_xmm0164561201_pi300-10000_pass1_cl_src60_src_b10.pi.gz
[Sat Jun  1 17:58:09 2013] Setting bgd. spectrum file to fullrun_pn_xmm0164561201_pi300-10000_pass1_cl_src60_bgd.pi.gz
[Sat Jun  1 18:53:14 2013] Not generating rmf since there are only 50 counts
[Sat Jun  1 18:53:14 2013] rmf not generated due to insufficient counts
[Sat Jun  1 22:29:21 2013] Updating aperture counts using extracted products
[Sat Jun  1 22:29:22 2013] Total counts from fullrun_pn_xmm0164561201_pi300-10000_pass1_cl_src60_src_b10.pi.gz = 36.00
[Sat Jun  1 22:29:22 2013] Total counts from fullrun_pn_xmm0164561201_pi300-10000_pass1_cl_src60_bgd.pi.gz = 1155.00
[Sat Jun  1 22:29:22 2013] Got source and background scale factors 433474.000000, 21991766.000000
[Sat Jun  1 22:29:22 2013] User source parameters:
  Position = (285.8, 229.6) = 18 41 8.47 5 28 52.1
  Extent = 17.9 (17.9-35.9)", rotation angle = 130 (127-133) degrees
  Source aperture counts = 13.2 +/- 7.1
  Background aperture counts = 22.8
  Rate = 0.002 +/- 0.001

[Sat Jun  1 22:29:27 2013] Calculating source flux in energy range 0.30-8.00
[Sat Jun  1 22:29:27 2013] Using photon index=1.80, rate=0.00711, arf fullrun_pn_xmm0164561201_pi300-10000_pass1_cl_src60.arf
[Sat Jun  1 22:29:27 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Jun  1 22:29:27 2013] Updating source flux to 5.8e-14
[Sat Jun  1 22:30:47 2013] Flag c found in src. 60 procflags, skipping spectral fitting
[Sat Jun  1 22:30:47 2013] Source 60 has fewer than 100.000000 counts, skipping spectral fitting
[Sat Jun  1 22:31:00 2013] xmm0164561201/analysis//spectral/fullrun_pn_xmm0164561201_pi300-10000_pass1_cl_src60_pl.csv not found, spectral fit skipped or did not complete