[Thu May 30 21:32:09 2013] Detection parameters: Position = (269.8, 277.0) = 18 41 13.14 5 32 18.5 Extent = 10.9" x 10.9", rotation angle = 0 degrees Source counts = 30.4 +/- 7.8 Background counts = 8.2 Rate = 0.006 +/- 0.002 [Thu May 30 21:32:10 2013] Off-axis axis estimate = 2.59' [Thu May 30 21:34:37 2013] Using EEF radius (= 7.73 ")to estimate initial spatial extent for simple fitting [Thu May 30 21:34:37 2013] Initial guess for spatial extent in simple fitting = 7.73" [Thu May 30 21:34:37 2013] source mask rpix=1.8, npix_max = 20, mask sum = 20, frac = 0.965 [Thu May 30 21:34:37 2013] Giving source the simple spatial ID 36 for pass 0, mean size = 7.73" [Fri May 31 02:13:23 2013] fullrun_pn_xmm0164561201_pi300-10000_cl_pass0_src36.ximg exists [Fri May 31 02:13:23 2013] fullrun_pn_xmm0164561201_pi300-10000_cl_pass0_src36_1.ximg exists [Fri May 31 02:13:23 2013] Fit fullrun_pn_xmm0164561201_pi300-10000_cl_pass0_src36 appears to have run properly [Fri May 31 02:13:24 2013] fullrun_pn_xmm0164561201_pi300-10000_cl_pass0_tfrozen_src36.ximg exists [Fri May 31 02:13:24 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0164561201_pi300-10000_cl_pass0_tfrozen_src36.csv [Fri May 31 02:13:24 2013] fullrun_pn_xmm0164561201_pi300-10000_cl_pass0_tfrozen_src36_1.ximg exists [Fri May 31 02:13:24 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0164561201_pi300-10000_cl_pass0_tfrozen_src36.csv [Fri May 31 02:13:24 2013] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0164561201_pi300-10000_cl_pass0_tfrozen_src36_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0164561201_pi300-10000_cl_pass0_tfrozen_src36.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Fri May 31 18:44:50 2013] Source 37 is offset by 2.029529 and 3.744732 pixels which is larger than 2 X fitted extent = 7.104046 x 1.359572, not incorporating fit results [Fri May 31 18:44:50 2013] Vigneting correction estimate = 1.000000 [Fri May 31 18:44:50 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Fri May 31 18:44:50 2013] Assessing source extent using major [Fri May 31 18:44:50 2013] Source does appear to be extended [Fri May 31 18:44:50 2013] Computing asymmetry using major and minor axis, asym = 1.00 [Fri May 31 18:46:11 2013] Using EEF radius (= 7.73 ")to estimate initial spatial extent for simple fitting [Fri May 31 18:46:11 2013] Initial guess for spatial extent in simple fitting = 7.73" [Fri May 31 18:46:11 2013] source mask rpix=1.8, npix_max = 20, mask sum = 20, frac = 0.965 [Fri May 31 18:46:11 2013] Giving source the simple spatial ID 35 for pass 1, mean size = 7.73" [Fri May 31 23:41:13 2013] fullrun_pn_xmm0164561201_pi300-10000_cl_pass1_src35.ximg exists [Fri May 31 23:41:13 2013] fullrun_pn_xmm0164561201_pi300-10000_cl_pass1_src35_1.ximg exists [Fri May 31 23:41:13 2013] Fit fullrun_pn_xmm0164561201_pi300-10000_cl_pass1_src35 appears to have run properly [Fri May 31 23:41:14 2013] fullrun_pn_xmm0164561201_pi300-10000_cl_pass1_tfrozen_src35.ximg exists [Fri May 31 23:41:14 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0164561201_pi300-10000_cl_pass1_tfrozen_src35.csv [Fri May 31 23:41:14 2013] fullrun_pn_xmm0164561201_pi300-10000_cl_pass1_tfrozen_src35_1.ximg exists [Fri May 31 23:41:14 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0164561201_pi300-10000_cl_pass1_tfrozen_src35.csv [Fri May 31 23:41:14 2013] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0164561201_pi300-10000_cl_pass1_tfrozen_src35_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0164561201_pi300-10000_cl_pass1_tfrozen_src35.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Sat Jun 1 17:06:21 2013] Source 37 is offset by 2.317030 and 4.217835 pixels which is larger than 2 X fitted extent = 1.294308 x 7.104046, not incorporating fit results [Sat Jun 1 17:06:21 2013] Vigneting correction estimate = 1.000000 [Sat Jun 1 17:06:21 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Sat Jun 1 17:06:21 2013] Assessing source extent using major [Sat Jun 1 17:06:21 2013] Source does appear to be extended [Sat Jun 1 17:06:21 2013] Computing asymmetry using major and minor axis, asym = 1.00 [Sat Jun 1 17:06:21 2013] Source is confused with source 32 [Sat Jun 1 17:07:41 2013] XMMSAS src. selection expression = ellipse(23420.145599, 24054.373688, 652.500000, 652.500000, 0.000000, X, Y) [Sat Jun 1 17:07:41 2013] Writing source region out to fullrun_pn_xmm0164561201_pi300-10000_pass1_cl_src37_src.reg [Sat Jun 1 17:07:41 2013] Extracting stamp from image fullrun_pn_xmm0164561201_pi300-10000_cl_sm2.00.img.gz, (232, 240) - (307, 315) [Sat Jun 1 17:07:41 2013] XMMSAS bgd. selection expression = annulus(23420.145599, 24054.373688, 1087.500000, 2175.000000, X, Y) && !ellipse(26222.146000, 26446.010000, 1335.296038, 1335.296038, 0.000000, X, Y) && !ellipse(25755.462000, 25954.718000, 1063.560031, 1063.560031, 0.000000, X, Y) && !ellipse(25681.957200, 25923.658200, 2127.120061, 710.053620, 144.906000, X, Y) && !ellipse(24153.048980, 24769.032200, 1440.664041, 288.780808, 312.176800, X, Y) && !ellipse(26792.836400, 22682.286800, 1249.520036, 156.189604, 157.542000, X, Y) && !ellipse(25655.592000, 22274.368000, 1257.992036, 1257.992036, 0.000000, X, Y) && !ellipse(25177.764374, 21881.302567, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26743.090960, 21853.619800, 1304.376038, 163.047205, 323.736000, X, Y) && !ellipse(25766.675000, 21005.905190, 1557.520045, 197.615206, 315.079500, X, Y) [Sat Jun 1 17:07:41 2013] Writing fullrun_pn_xmm0164561201_pi300-10000_pass1_cl_src37.gif [Sat Jun 1 17:39:20 2013] Mean detx,y = (-3244.68, 3658.04) [Sat Jun 1 17:39:25 2013] Setting backscal keywords in source and bgd. spectrum [Sat Jun 1 17:39:51 2013] Binned source spectrum to 10 counts/bin [Sat Jun 1 17:39:51 2013] Setting source spectrum file to fullrun_pn_xmm0164561201_pi300-10000_pass1_cl_src37_src_b10.pi.gz [Sat Jun 1 17:39:51 2013] Setting bgd. spectrum file to fullrun_pn_xmm0164561201_pi300-10000_pass1_cl_src37_bgd.pi.gz [Sat Jun 1 18:32:21 2013] Not generating rmf since there are only 30 counts [Sat Jun 1 18:32:21 2013] rmf not generated due to insufficient counts [Sat Jun 1 22:29:15 2013] Updating aperture counts using extracted products [Sat Jun 1 22:29:15 2013] Total counts from fullrun_pn_xmm0164561201_pi300-10000_pass1_cl_src37_src_b10.pi.gz = 106.00 [Sat Jun 1 22:29:15 2013] Total counts from fullrun_pn_xmm0164561201_pi300-10000_pass1_cl_src37_bgd.pi.gz = 406.00 [Sat Jun 1 22:29:15 2013] Got source and background scale factors 1141090.000000, 8035541.000000 [Sat Jun 1 22:29:15 2013] User source parameters: Position = (269.8, 277.0) = 18 41 13.14 5 32 18.5 Extent = 10.9" x 10.9", rotation angle = 0 Source aperture counts = 48.3 +/- 11.3 Background aperture counts = 57.7 Rate = 0.007 +/- 0.002 [Sat Jun 1 22:29:15 2013] Updating counts from extracted products [Sat Jun 1 22:29:15 2013] Set source signif. to 48.35/7.59 = 6.37 [Sat Jun 1 22:29:26 2013] Calculating source flux in energy range 0.30-8.00 [Sat Jun 1 22:29:26 2013] Using photon index=1.80, rate=0.00687, arf fullrun_pn_xmm0164561201_pi300-10000_pass1_cl_src37.arf [Sat Jun 1 22:29:26 2013] Assuming count rate is from the 0.30-10.00 bandpass [Sat Jun 1 22:29:26 2013] Updating source flux to 4.1e-14 [Sat Jun 1 22:30:47 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting [Sat Jun 1 22:31:00 2013] xmm0164561201/analysis//spectral/fullrun_pn_xmm0164561201_pi300-10000_pass1_cl_src37_pl.csv not found, spectral fit skipped or did not complete