[Thu May 30 21:32:08 2013] Detection parameters:
  Position = (167.3, 308.2) = 18 41 42.99 5 34 35.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 198.2 +/- 17.1
  Background counts = 7.1
  Rate = 0.03 +/- 0.002

[Thu May 30 21:32:10 2013] Off-axis axis estimate = 9.53'
[Thu May 30 21:34:36 2013] Using EEF radius (= 11.20 ")to estimate initial spatial extent for simple fitting
[Thu May 30 21:34:36 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Thu May 30 21:34:36 2013] Initial guess for spatial extent in simple fitting = 11.20"
[Thu May 30 21:34:36 2013] source mask rpix=2.6, npix_max = 37, mask sum = 36, frac = 0.953
[Thu May 30 21:34:36 2013] Giving source the simple spatial ID 1 for pass 0, mean size = 11.20"
[Fri May 31 02:13:22 2013] fullrun_pn_xmm0164561201_pi300-10000_cl_pass0_src1.ximg exists
[Fri May 31 02:13:22 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0164561201_pi300-10000_cl_pass0_src1.csv
[Fri May 31 02:13:22 2013] fullrun_pn_xmm0164561201_pi300-10000_cl_pass0_src1_1.ximg exists
[Fri May 31 02:13:22 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0164561201_pi300-10000_cl_pass0_src1.csv
[Fri May 31 02:13:22 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0164561201_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0164561201_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 31 02:13:23 2013] fullrun_pn_xmm0164561201_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Fri May 31 02:13:23 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0164561201_pi300-10000_cl_pass0_tfrozen_src1.csv
[Fri May 31 02:13:23 2013] fullrun_pn_xmm0164561201_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Fri May 31 02:13:23 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0164561201_pi300-10000_cl_pass0_tfrozen_src1.csv
[Fri May 31 02:13:23 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0164561201_pi300-10000_cl_pass0_tfrozen_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0164561201_pi300-10000_cl_pass0_tfrozen_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 31 18:44:50 2013] Warning: source 1 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 1 at 13.795949 pixels away
[Fri May 31 18:44:50 2013] Vigneting correction estimate = 1.000000
[Fri May 31 18:44:50 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May 31 18:44:50 2013] Assessing source extent using major
[Fri May 31 18:44:50 2013] Source does appear to be extended
[Fri May 31 18:44:50 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri May 31 18:46:11 2013] Using EEF radius (= 11.20 ")to estimate initial spatial extent for simple fitting
[Fri May 31 18:46:11 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri May 31 18:46:11 2013] Initial guess for spatial extent in simple fitting = 11.20"
[Fri May 31 18:46:11 2013] source mask rpix=2.6, npix_max = 37, mask sum = 36, frac = 0.953
[Fri May 31 18:46:11 2013] Giving source the simple spatial ID 1 for pass 1, mean size = 11.20"
[Fri May 31 23:41:12 2013] fullrun_pn_xmm0164561201_pi300-10000_cl_pass1_src1.ximg exists
[Fri May 31 23:41:12 2013] fullrun_pn_xmm0164561201_pi300-10000_cl_pass1_src1_1.ximg exists
[Fri May 31 23:41:12 2013] Fit fullrun_pn_xmm0164561201_pi300-10000_cl_pass1_src1 appears to have run properly
[Fri May 31 23:41:14 2013] fullrun_pn_xmm0164561201_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Fri May 31 23:41:14 2013] fullrun_pn_xmm0164561201_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Fri May 31 23:41:14 2013] Fit fullrun_pn_xmm0164561201_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Sat Jun  1 17:06:20 2013] Spatial fit model total counts = 275.950000, observed total counts = 263.000000
[Sat Jun  1 17:06:20 2013] Offset between fit and detection position for source 1 = 0.122838 pixels
[Sat Jun  1 17:06:20 2013] 276.404000 total counts/ 128.785000 bgd. counts: snr = 13.007973
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.122838 pixels
  Position = (167.4, 308.2) = 18 41 42.96 5 34 34.0
  Extent = 7.7 (6.3-9.2)" x 4.4 (3.6-5.2)", rotation angle = 84 (70-97) degrees
  Source counts = 147.6 +/- 16.6
  Background counts = 128.8
  Rate = 0.02 +/- 0.002
[Sat Jun  1 17:06:21 2013] Vigneting correction estimate = 1.000000
[Sat Jun  1 17:06:21 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun  1 17:06:21 2013] Assessing source extent using major axis lower bound
[Sat Jun  1 17:06:21 2013] Source does appear to be extended
[Sat Jun  1 17:06:21 2013] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 1.21
[Sat Jun  1 17:07:39 2013] XMMSAS src. selection expression = ellipse(14516.083400, 26767.001600, 459.385213, 262.279808, 83.887315, X, Y)
[Sat Jun  1 17:07:39 2013] Writing source region out to fullrun_pn_xmm0164561201_pi300-10000_pass1_cl_src1_src.reg
[Sat Jun  1 17:07:39 2013] Extracting stamp from image fullrun_pn_xmm0164561201_pi300-10000_cl_sm2.00.img.gz, (141, 282) - (194, 335)
[Sat Jun  1 17:07:39 2013] XMMSAS bgd. selection expression = annulus(14516.083400, 26767.001600, 765.642022, 1531.284044, X, Y)
[Sat Jun  1 17:07:39 2013] Writing fullrun_pn_xmm0164561201_pi300-10000_pass1_cl_src1.gif
[Sat Jun  1 17:07:52 2013] Mean detx,y = (-12468.38, 2093.50) 
[Sat Jun  1 17:07:57 2013] Setting backscal keywords in source and bgd. spectrum
[Sat Jun  1 17:08:29 2013] Binned source spectrum to 10 counts/bin
[Sat Jun  1 17:08:30 2013] Setting source spectrum file to fullrun_pn_xmm0164561201_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Sat Jun  1 17:08:30 2013] Setting bgd. spectrum file to fullrun_pn_xmm0164561201_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Sat Jun  1 22:29:05 2013] Updating aperture counts using extracted products
[Sat Jun  1 22:29:05 2013] Total counts from fullrun_pn_xmm0164561201_pi300-10000_pass1_cl_src1_src_b10.pi.gz = 163.00
[Sat Jun  1 22:29:05 2013] Total counts from fullrun_pn_xmm0164561201_pi300-10000_pass1_cl_src1_bgd.pi.gz = 199.00
[Sat Jun  1 22:29:05 2013] Got source and background scale factors 376000.000000, 5188032.000000
[Sat Jun  1 22:29:05 2013] User source parameters:
  Position = (167.4, 308.2) = 18 41 42.96 5 34 34.0
  Extent = 7.7 (6.3-9.2)" x 4.4 (3.6-5.2)", rotation angle = 84 (70-97) degrees
  Source aperture counts = 148.6 +/- 13.8
  Background aperture counts = 14.4
  Rate = 0.02 +/- 0.002

[Sat Jun  1 22:29:24 2013] Calculating source flux in energy range 0.30-8.00
[Sat Jun  1 22:29:24 2013] Using photon index=1.80, rate=0.021, arf fullrun_pn_xmm0164561201_pi300-10000_pass1_cl_src1.arf
[Sat Jun  1 22:29:24 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Jun  1 22:29:24 2013] Updating source flux to 2.8e-13
[Sat Jun  1 22:31:00 2013] xmm0164561201/analysis//spectral/fullrun_pn_xmm0164561201_pi300-10000_pass1_cl_src1_pl.csv not found, spectral fit skipped or did not complete