[Thu May 30 21:33:30 2013] Detection parameters:
  Position = (267.5, 123.3) = 18 41 13.79 5 21 9.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 35.1 +/- 8.3
  Background counts = 4.5
  Rate = 0.004 +/- 0.001

[Thu May 30 21:33:32 2013] Off-axis axis estimate = 12.90'
[Fri May 31 09:07:10 2013] Using EEF radius (= 12.88 ")to estimate initial spatial extent for simple fitting
[Fri May 31 09:07:10 2013] Initial guess for spatial extent in simple fitting = 12.88"
[Fri May 31 09:07:10 2013] source mask rpix=3.0, npix_max = 47, mask sum = 45, frac = 0.940
[Fri May 31 09:07:10 2013] Giving source the simple spatial ID 88 for pass 0, mean size = 12.88"
[Fri May 31 18:44:22 2013] fullrun_mos2_xmm0164561201_pi300-10000_cl_pass0_src88.ximg exists
[Fri May 31 18:44:22 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0164561201_pi300-10000_cl_pass0_src88.csv
[Fri May 31 18:44:22 2013] fullrun_mos2_xmm0164561201_pi300-10000_cl_pass0_src88_1.ximg exists
[Fri May 31 18:44:22 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0164561201_pi300-10000_cl_pass0_src88.csv
[Fri May 31 18:44:22 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0164561201_pi300-10000_cl_pass0_src88_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0164561201_pi300-10000_cl_pass0_src88.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 31 18:44:24 2013] fullrun_mos2_xmm0164561201_pi300-10000_cl_pass0_tfrozen_src88.ximg exists
[Fri May 31 18:44:24 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0164561201_pi300-10000_cl_pass0_tfrozen_src88.csv
[Fri May 31 18:44:24 2013] fullrun_mos2_xmm0164561201_pi300-10000_cl_pass0_tfrozen_src88_1.ximg exists
[Fri May 31 18:44:24 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0164561201_pi300-10000_cl_pass0_tfrozen_src88.csv
[Fri May 31 18:44:24 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0164561201_pi300-10000_cl_pass0_tfrozen_src88_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0164561201_pi300-10000_cl_pass0_tfrozen_src88.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 31 18:45:43 2013] Warning, spatial fit 88 centroid is now closest to src. 94
[Fri May 31 18:45:43 2013] Vigneting correction estimate = 1.000000
[Fri May 31 18:45:43 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May 31 18:45:43 2013] Assessing source extent using major
[Fri May 31 18:45:43 2013] Source does appear to be extended
[Fri May 31 18:45:43 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri May 31 18:45:43 2013] Source is confused with source 93
[Sat Jun  1 06:48:35 2013] Using EEF radius (= 12.88 ")to estimate initial spatial extent for simple fitting
[Sat Jun  1 06:48:35 2013] Initial guess for spatial extent in simple fitting = 12.88"
[Sat Jun  1 06:48:35 2013] source mask rpix=3.0, npix_max = 47, mask sum = 45, frac = 0.940
[Sat Jun  1 06:48:35 2013] Giving source the simple spatial ID 85 for pass 1, mean size = 12.88"
[Sat Jun  1 17:05:55 2013] fullrun_mos2_xmm0164561201_pi300-10000_cl_pass1_src85.ximg exists
[Sat Jun  1 17:05:55 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0164561201_pi300-10000_cl_pass1_src85.csv
[Sat Jun  1 17:05:55 2013] fullrun_mos2_xmm0164561201_pi300-10000_cl_pass1_src85_1.ximg exists
[Sat Jun  1 17:05:55 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0164561201_pi300-10000_cl_pass1_src85.csv
[Sat Jun  1 17:05:55 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0164561201_pi300-10000_cl_pass1_src85_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0164561201_pi300-10000_cl_pass1_src85.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun  1 17:05:57 2013] fullrun_mos2_xmm0164561201_pi300-10000_cl_pass1_tfrozen_src85.ximg exists
[Sat Jun  1 17:05:57 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0164561201_pi300-10000_cl_pass1_tfrozen_src85.csv
[Sat Jun  1 17:05:57 2013] fullrun_mos2_xmm0164561201_pi300-10000_cl_pass1_tfrozen_src85_1.ximg exists
[Sat Jun  1 17:05:57 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0164561201_pi300-10000_cl_pass1_tfrozen_src85.csv
[Sat Jun  1 17:05:57 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0164561201_pi300-10000_cl_pass1_tfrozen_src85_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0164561201_pi300-10000_cl_pass1_tfrozen_src85.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun  1 17:07:12 2013] Spatial fit model total counts = 424.946000, observed total counts = 311.000000
[Sat Jun  1 17:07:12 2013] Poor agreement between spatial fit and data for source 11
It may help to tweak spatial fit manually
Not incorporating fit results
[Sat Jun  1 17:07:13 2013] Vigneting correction estimate = 1.000000
[Sat Jun  1 17:07:13 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun  1 17:07:13 2013] Assessing source extent using major
[Sat Jun  1 17:07:13 2013] Source does appear to be extended
[Sat Jun  1 17:07:13 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun  1 20:07:50 2013] XMMSAS src. selection expression = ellipse(23224.756683, 10674.597145, 652.500000, 652.500000, 0.000000, X, Y)
[Sat Jun  1 20:07:50 2013] Writing source region out to fullrun_mos2_xmm0164561201_pi300-10000_pass1_cl_src11_src.reg
[Sat Jun  1 20:07:50 2013] Extracting stamp from image fullrun_mos2_xmm0164561201_pi300-10000_cl_sm2.00.img.gz, (230, 86) - (305, 161)
[Sat Jun  1 20:07:50 2013] XMMSAS bgd. selection expression = annulus(23224.756683, 10674.597145, 1087.500000, 2175.000000, X, Y) && !ellipse(22504.862200, 13433.026800, 1892.016054, 284.142408, 102.027000, X, Y) && !ellipse(22250.697600, 11761.455400, 2013.528058, 306.052809, 96.667840, X, Y) && !ellipse(24443.611603, 10733.301170, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24548.193460, 11487.528800, 2235.240064, 293.620008, 99.184600, X, Y) && !ellipse(22164.870316, 10839.787094, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21445.715805, 10926.924492, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21694.196000, 14634.874000, 1800.088052, 579.905617, 89.956000, X, Y) && !ellipse(22882.109222, 11446.806442, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24621.763900, 11904.914000, 2196.064063, 274.508008, 100.754600, X, Y) && !ellipse(21419.329200, 12017.954000, 2010.512058, 673.311219, 93.646060, X, Y) && !ellipse(21660.786000, 13328.781200, 2176.160063, 272.020008, 99.297080, X, Y) && !ellipse(23103.054000, 12105.002900, 1970.248057, 866.352025, 97.093340, X, Y) && !ellipse(23483.092600, 14119.298000, 1823.608052, 737.299221, 114.395600, X, Y) && !ellipse(24766.072876, 12566.356628, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19705.426800, 13507.109200, 1960.344056, 245.043207, 90.481761, X, Y) && !ellipse(23334.682861, 12923.626663, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21474.693000, 12848.829600, 1957.808056, 651.460819, 93.720100, X, Y) && !ellipse(23114.501282, 13606.429840, 870.000000, 870.000000, 0.000000, X, Y)
[Sat Jun  1 20:07:50 2013] Writing fullrun_mos2_xmm0164561201_pi300-10000_pass1_cl_src11.gif
[Sat Jun  1 20:48:16 2013] Mean detx,y = (1882.79, -16937.37) 
[Sat Jun  1 20:48:18 2013] Setting backscal keywords in source and bgd. spectrum
[Sat Jun  1 20:48:44 2013] Binned source spectrum to 10 counts/bin
[Sat Jun  1 20:48:44 2013] Setting source spectrum file to fullrun_mos2_xmm0164561201_pi300-10000_pass1_cl_src11_src_b10.pi.gz
[Sat Jun  1 20:48:44 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0164561201_pi300-10000_pass1_cl_src11_bgd.pi.gz
[Sat Jun  1 22:23:23 2013] Not generating rmf since there are only 35 counts
[Sat Jun  1 22:23:23 2013] rmf not generated due to insufficient counts
[Sat Jun  1 22:30:05 2013] Updating aperture counts using extracted products
[Sat Jun  1 22:30:05 2013] Total counts from fullrun_mos2_xmm0164561201_pi300-10000_pass1_cl_src11_src_b10.pi.gz = 102.00
[Sat Jun  1 22:30:05 2013] Total counts from fullrun_mos2_xmm0164561201_pi300-10000_pass1_cl_src11_bgd.pi.gz = 9.00
[Sat Jun  1 22:30:05 2013] Got source and background scale factors 985970.000000, 296418.000000
[Sat Jun  1 22:30:05 2013] User source parameters:
  Position = (267.5, 123.3) = 18 41 13.79 5 21 9.6
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 72.1 +/- 11.1
  Background aperture counts = 29.9
  Rate = 0.008 +/- 0.001

[Sat Jun  1 22:30:05 2013] Updating counts from extracted products
[Sat Jun  1 22:30:05 2013] Set source signif. to 72.06/5.47 = 13.17
[Sat Jun  1 22:30:11 2013] Calculating source flux in energy range 0.30-8.00
[Sat Jun  1 22:30:11 2013] Using photon index=1.80, rate=0.00831, arf fullrun_mos2_xmm0164561201_pi300-10000_pass1_cl_src11.arf
[Sat Jun  1 22:30:11 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Jun  1 22:30:11 2013] Updating source flux to 3.8e-13
[Sat Jun  1 22:30:27 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Sat Jun  1 22:30:47 2013] xmm0164561201/analysis//spectral/fullrun_mos2_xmm0164561201_pi300-10000_pass1_cl_src11_pl.csv not found, spectral fit skipped or did not complete