[Wed Mar  7 11:08:01 2012] Detection parameters:
  Position = (395.0, 205.0) = 7 19 51.91 -31 34 15.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 289.9 +/- 24.1
  Background counts = 51.9
  Rate = 0.008 +/- 0.0007

[Wed Mar  7 11:08:03 2012] Off-axis axis estimate = 9.74'
[Wed Mar  7 11:14:56 2012] Using EEF radius (= 11.30 ")to estimate initial spatial extent for simple fitting
[Wed Mar  7 11:14:56 2012] Initial guess for spatial extent in simple fitting = 11.30"
[Wed Mar  7 11:14:56 2012] source mask rpix=2.6, npix_max = 38, mask sum = 36, frac = 0.938
[Wed Mar  7 11:14:56 2012] Giving source the simple spatial ID 5 for pass 0, mean size = 11.30"
[Wed Mar  7 17:54:35 2012] fullrun_pn_xmm0164560501_pi300-10000_cl_pass0_src5.ximg exists
[Wed Mar  7 17:54:35 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0164560501_pi300-10000_cl_pass0_src5.csv
[Wed Mar  7 17:54:35 2012] fullrun_pn_xmm0164560501_pi300-10000_cl_pass0_src5_1.ximg exists
[Wed Mar  7 17:54:35 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0164560501_pi300-10000_cl_pass0_src5.csv
[Wed Mar  7 17:54:35 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0164560501_pi300-10000_cl_pass0_src5_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0164560501_pi300-10000_cl_pass0_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Mar  7 17:54:36 2012] fullrun_pn_xmm0164560501_pi300-10000_cl_pass0_tfrozen_src5.ximg exists
[Wed Mar  7 17:54:36 2012] fullrun_pn_xmm0164560501_pi300-10000_cl_pass0_tfrozen_src5_1.ximg exists
[Wed Mar  7 17:54:36 2012] Fit fullrun_pn_xmm0164560501_pi300-10000_cl_pass0_tfrozen_src5 appears to have run properly
[Wed Mar  7 18:38:20 2012] Warning, spatial fit 5 centroid is now closest to src. 1
[Wed Mar  7 18:38:20 2012] Vigneting correction estimate = 1.000000
[Wed Mar  7 18:38:20 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Mar  7 18:38:20 2012] Assessing source extent using major
[Wed Mar  7 18:38:20 2012] Source does appear to be extended
[Wed Mar  7 18:38:20 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Mar  7 18:38:20 2012] Source is confused with source 1
[Wed Mar  7 18:38:40 2012] Using EEF radius (= 11.30 ")to estimate initial spatial extent for simple fitting
[Wed Mar  7 18:38:40 2012] Initial guess for spatial extent in simple fitting = 11.30"
[Wed Mar  7 18:38:40 2012] source mask rpix=2.6, npix_max = 38, mask sum = 36, frac = 0.938
[Wed Mar  7 18:38:40 2012] Giving source the simple spatial ID 5 for pass 1, mean size = 11.30"
[Wed Mar  7 21:31:44 2012] fullrun_pn_xmm0164560501_pi300-10000_cl_pass1_src5.ximg exists
[Wed Mar  7 21:31:44 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0164560501_pi300-10000_cl_pass1_src5.csv
[Wed Mar  7 21:31:44 2012] fullrun_pn_xmm0164560501_pi300-10000_cl_pass1_src5_1.ximg exists
[Wed Mar  7 21:31:44 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0164560501_pi300-10000_cl_pass1_src5.csv
[Wed Mar  7 21:31:44 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0164560501_pi300-10000_cl_pass1_src5_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0164560501_pi300-10000_cl_pass1_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Mar  7 21:31:45 2012] fullrun_pn_xmm0164560501_pi300-10000_cl_pass1_tfrozen_src5.ximg exists
[Wed Mar  7 21:31:45 2012] fullrun_pn_xmm0164560501_pi300-10000_cl_pass1_tfrozen_src5_1.ximg exists
[Wed Mar  7 21:31:45 2012] Fit fullrun_pn_xmm0164560501_pi300-10000_cl_pass1_tfrozen_src5 appears to have run properly
[Wed Mar  7 22:11:53 2012] Spatial fit model total counts = 942.994000, observed total counts = 932.000000
[Wed Mar  7 22:11:53 2012] Offset between fit and detection position for source 5 = 8.526528 pixels
[Wed Mar  7 22:11:53 2012] 938.772700 total counts/ 10.896700 bgd. counts: snr = 281.088090
Spatial fit parameters:
  Offset between fit and detection position for source 5 = 8.526528 pixels
  Position = (389.6, 211.6) = 7 19 53.75 -31 33 45.8
  Extent = 22.6 (22.6-22.6)", rotation angle = 0
  Source counts = 927.9 +/- 30.6
  Background counts = 10.9
  Rate = 0.04 +/- 0.001
[Wed Mar  7 22:11:53 2012] Vigneting correction estimate = 1.000000
[Wed Mar  7 22:11:53 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Mar  7 22:11:53 2012] Assessing source extent using major axis lower bound
[Wed Mar  7 22:11:53 2012] Source does appear to be extended
[Wed Mar  7 22:11:53 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Mar  7 22:12:09 2012] XMMSAS src. selection expression = ellipse(33844.448000, 18357.380000, 1355.316039, 1355.316039, 0.000000, X, Y)
[Wed Mar  7 22:12:09 2012] Writing source region out to fullrun_pn_xmm0164560501_pi300-10000_pass1_cl_src5_src.reg
[Wed Mar  7 22:12:09 2012] Extracting stamp from image fullrun_pn_xmm0164560501_pi300-10000_cl_sm2.00.img.gz, (312, 134) - (467, 289)
[Wed Mar  7 22:12:09 2012] XMMSAS bgd. selection expression = annulus(33844.448000, 18357.380000, 2258.860065, 4517.720130, X, Y) && !ellipse(34681.412000, 17269.942000, 1807.040052, 1807.040052, 0.000000, X, Y) && !ellipse(32631.116000, 19796.096000, 1595.400046, 1595.400046, 0.000000, X, Y) && !ellipse(28540.656000, 24687.932000, 2362.128068, 2362.128068, 0.000000, X, Y) && !ellipse(29100.898000, 23983.284000, 1242.168036, 1242.168036, 0.000000, X, Y) && !ellipse(29432.170000, 23562.502000, 2839.848082, 2839.848082, 0.000000, X, Y) && !ellipse(30131.556000, 22762.984000, 1424.952041, 1424.952041, 0.000000, X, Y) && !ellipse(30919.646000, 21762.038000, 1424.952041, 1424.952041, 0.000000, X, Y) && !ellipse(31517.104049, 21218.888137, 2416.608070, 474.578009, 50.366208, X, Y) && !ellipse(31805.098000, 20788.156000, 1595.400046, 1595.400046, 0.000000, X, Y) && !ellipse(30893.068400, 20239.998000, 405.884012, 405.884012, 0.000000, X, Y) && !ellipse(32055.770000, 20274.086000, 3116.912090, 3116.912090, 0.000000, X, Y) && !ellipse(34055.081768, 19848.520000, 504.384015, 504.384015, 0.000000, X, Y) && !ellipse(29913.760000, 22989.106000, 1324.456038, 1324.456038, 0.000000, X, Y)
[Wed Mar  7 22:12:09 2012] Writing fullrun_pn_xmm0164560501_pi300-10000_pass1_cl_src5.gif
[Wed Mar  7 22:17:23 2012] Mean detx,y = (138.04, 12348.93) 
[Wed Mar  7 22:17:29 2012] Setting backscal keywords in source and bgd. spectrum
[Wed Mar  7 22:18:53 2012] Binned source spectrum to 10 counts/bin
[Wed Mar  7 22:18:54 2012] Setting source spectrum file to fullrun_pn_xmm0164560501_pi300-10000_pass1_cl_src5_src_b10.pi.gz
[Wed Mar  7 22:18:54 2012] Setting bgd. spectrum file to fullrun_pn_xmm0164560501_pi300-10000_pass1_cl_src5_bgd.pi.gz
[Thu Mar  8 23:10:27 2012] Updating aperture counts using extracted products
[Thu Mar  8 23:10:27 2012] Error reading totcts from fullrun_pn_xmm0164560501_pi300-10000_pass1_cl_src5_src_b10.pi.gz
[Thu Mar  8 23:10:30 2012] Calculating source flux in energy range 0.30-8.00
[Thu Mar  8 23:10:30 2012] Using photon index=1.80, rate=0.0384, arf fullrun_pn_xmm0164560501_pi300-10000_pass1_cl_src5.arf
[Thu Mar  8 23:10:30 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Mar  8 23:10:30 2012] Updating source flux to 1.7e-13
[Thu Mar  8 23:11:49 2012] Flag c found in src. 5 procflags, skipping spectral fitting