[Wed Mar  7 11:08:01 2012] Detection parameters:
  Position = (352.1, 256.1) = 7 20 6.51 -31 30 31.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 242.7 +/- 22.9
  Background counts = 64.7
  Rate = 0.01 +/- 0.001

[Wed Mar  7 11:08:03 2012] Off-axis axis estimate = 4.95'
[Wed Mar  7 11:14:56 2012] Using EEF radius (= 8.91 ")to estimate initial spatial extent for simple fitting
[Wed Mar  7 11:14:56 2012] Initial guess for spatial extent in simple fitting = 8.91"
[Wed Mar  7 11:14:56 2012] source mask rpix=2.0, npix_max = 25, mask sum = 25, frac = 0.963
[Wed Mar  7 11:14:56 2012] Giving source the simple spatial ID 18 for pass 0, mean size = 8.91"
[Wed Mar  7 17:54:35 2012] fullrun_pn_xmm0164560501_pi300-10000_cl_pass0_src18.ximg exists
[Wed Mar  7 17:54:35 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0164560501_pi300-10000_cl_pass0_src18.csv
[Wed Mar  7 17:54:35 2012] fullrun_pn_xmm0164560501_pi300-10000_cl_pass0_src18_1.ximg exists
[Wed Mar  7 17:54:35 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0164560501_pi300-10000_cl_pass0_src18.csv
[Wed Mar  7 17:54:35 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0164560501_pi300-10000_cl_pass0_src18_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0164560501_pi300-10000_cl_pass0_src18.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Mar  7 17:54:36 2012] fullrun_pn_xmm0164560501_pi300-10000_cl_pass0_tfrozen_src18.ximg exists
[Wed Mar  7 17:54:36 2012] fullrun_pn_xmm0164560501_pi300-10000_cl_pass0_tfrozen_src18_1.ximg exists
[Wed Mar  7 17:54:36 2012] Fit fullrun_pn_xmm0164560501_pi300-10000_cl_pass0_tfrozen_src18 appears to have run properly
[Wed Mar  7 18:38:20 2012] Warning, spatial fit 18 centroid is now closest to src. 16
[Wed Mar  7 18:38:20 2012] Vigneting correction estimate = 1.000000
[Wed Mar  7 18:38:20 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Mar  7 18:38:20 2012] Assessing source extent using major
[Wed Mar  7 18:38:20 2012] Source does appear to be extended
[Wed Mar  7 18:38:20 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Mar  7 18:38:20 2012] Source is confused with source 16
[Wed Mar  7 18:38:40 2012] Using EEF radius (= 8.91 ")to estimate initial spatial extent for simple fitting
[Wed Mar  7 18:38:40 2012] Initial guess for spatial extent in simple fitting = 8.91"
[Wed Mar  7 18:38:40 2012] source mask rpix=2.0, npix_max = 25, mask sum = 25, frac = 0.963
[Wed Mar  7 18:38:40 2012] Giving source the simple spatial ID 18 for pass 1, mean size = 8.91"
[Wed Mar  7 21:31:44 2012] fullrun_pn_xmm0164560501_pi300-10000_cl_pass1_src18.ximg exists
[Wed Mar  7 21:31:44 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0164560501_pi300-10000_cl_pass1_src18.csv
[Wed Mar  7 21:31:44 2012] fullrun_pn_xmm0164560501_pi300-10000_cl_pass1_src18_1.ximg exists
[Wed Mar  7 21:31:44 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0164560501_pi300-10000_cl_pass1_src18.csv
[Wed Mar  7 21:31:44 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0164560501_pi300-10000_cl_pass1_src18_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0164560501_pi300-10000_cl_pass1_src18.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Mar  7 21:31:45 2012] fullrun_pn_xmm0164560501_pi300-10000_cl_pass1_tfrozen_src18.ximg exists
[Wed Mar  7 21:31:45 2012] fullrun_pn_xmm0164560501_pi300-10000_cl_pass1_tfrozen_src18_1.ximg exists
[Wed Mar  7 21:31:45 2012] Fit fullrun_pn_xmm0164560501_pi300-10000_cl_pass1_tfrozen_src18 appears to have run properly
[Wed Mar  7 22:11:53 2012] Spatial fit model total counts = 1013.790000, observed total counts = 1010.000000
[Wed Mar  7 22:11:53 2012] Offset between fit and detection position for source 18 = 6.658417 pixels
[Wed Mar  7 22:11:53 2012] 1024.968000 total counts/ 359.911000 bgd. counts: snr = 35.055915
Spatial fit parameters:
  Offset between fit and detection position for source 18 = 6.658417 pixels
  Position = (356.0, 250.7) = 7 20 5.20 -31 30 55.7
  Extent = 17.8 (17.8-35.6)", rotation angle = 0
  Source counts = 665.1 +/- 32.0
  Background counts = 359.9
  Rate = 0.03 +/- 0.001
[Wed Mar  7 22:11:53 2012] Vigneting correction estimate = 1.000000
[Wed Mar  7 22:11:53 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Mar  7 22:11:53 2012] Assessing source extent using major axis lower bound
[Wed Mar  7 22:11:53 2012] Source does appear to be extended
[Wed Mar  7 22:11:53 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Mar  7 22:12:10 2012] XMMSAS src. selection expression = ellipse(30919.646000, 21762.038000, 1068.714031, 1068.714031, 0.000000, X, Y)
[Wed Mar  7 22:12:10 2012] Writing source region out to fullrun_pn_xmm0164560501_pi300-10000_pass1_cl_src18_src.reg
[Wed Mar  7 22:12:10 2012] Extracting stamp from image fullrun_pn_xmm0164560501_pi300-10000_cl_sm2.00.img.gz, (295, 189) - (417, 312)
[Wed Mar  7 22:12:10 2012] XMMSAS bgd. selection expression = annulus(30919.646000, 21762.038000, 1781.190051, 3562.380103, X, Y) && !ellipse(34681.412000, 17269.942000, 1807.040052, 1807.040052, 0.000000, X, Y) && !ellipse(32631.116000, 19796.096000, 1595.400046, 1595.400046, 0.000000, X, Y) && !ellipse(33844.448000, 18357.380000, 1807.088052, 1807.088052, 0.000000, X, Y) && !ellipse(27595.684000, 25834.786000, 2252.800065, 2252.800065, 0.000000, X, Y) && !ellipse(28540.656000, 24687.932000, 2362.128068, 2362.128068, 0.000000, X, Y) && !ellipse(28735.810000, 24409.044000, 1208.304035, 1208.304035, 0.000000, X, Y) && !ellipse(29100.898000, 23983.284000, 1242.168036, 1242.168036, 0.000000, X, Y) && !ellipse(29432.170000, 23562.502000, 2839.848082, 2839.848082, 0.000000, X, Y) && !ellipse(30131.556000, 22762.984000, 1424.952041, 1424.952041, 0.000000, X, Y) && !ellipse(31517.104049, 21218.888137, 2416.608070, 474.578009, 50.366208, X, Y) && !ellipse(31805.098000, 20788.156000, 1595.400046, 1595.400046, 0.000000, X, Y) && !ellipse(27801.967092, 20692.472683, 534.883306, 350.272841, 1.007790, X, Y) && !ellipse(30893.068400, 20239.998000, 405.884012, 405.884012, 0.000000, X, Y) && !ellipse(32055.770000, 20274.086000, 3116.912090, 3116.912090, 0.000000, X, Y) && !ellipse(34055.081768, 19848.520000, 504.384015, 504.384015, 0.000000, X, Y) && !ellipse(29913.760000, 22989.106000, 1324.456038, 1324.456038, 0.000000, X, Y)
[Wed Mar  7 22:12:10 2012] Writing fullrun_pn_xmm0164560501_pi300-10000_pass1_cl_src18.gif
[Wed Mar  7 23:17:31 2012] Mean detx,y = (100.56, 7874.92) 
[Wed Mar  7 23:17:34 2012] Setting backscal keywords in source and bgd. spectrum
[Wed Mar  7 23:18:05 2012] Binned source spectrum to 10 counts/bin
[Wed Mar  7 23:18:05 2012] Setting source spectrum file to fullrun_pn_xmm0164560501_pi300-10000_pass1_cl_src18_src_b10.pi.gz
[Wed Mar  7 23:18:05 2012] Setting bgd. spectrum file to fullrun_pn_xmm0164560501_pi300-10000_pass1_cl_src18_bgd.pi.gz
[Thu Mar  8 23:10:28 2012] Updating aperture counts using extracted products
[Thu Mar  8 23:10:28 2012] Error reading totcts from fullrun_pn_xmm0164560501_pi300-10000_pass1_cl_src18_src_b10.pi.gz
[Thu Mar  8 23:10:31 2012] Calculating source flux in energy range 0.30-8.00
[Thu Mar  8 23:10:31 2012] Using photon index=1.80, rate=0.0275, arf fullrun_pn_xmm0164560501_pi300-10000_pass1_cl_src18.arf
[Thu Mar  8 23:10:31 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Mar  8 23:10:31 2012] Updating source flux to 9.2e-14
[Thu Mar  8 23:11:49 2012] Flag c found in src. 18 procflags, skipping spectral fitting