[Wed Mar  7 11:08:01 2012] Detection parameters:
  Position = (336.7, 273.9) = 7 20 11.74 -31 29 14.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 257.8 +/- 24.1
  Background counts = 69.8
  Rate = 0.009 +/- 0.0009

[Wed Mar  7 11:08:03 2012] Off-axis axis estimate = 3.30'
[Wed Mar  7 11:14:56 2012] Using EEF radius (= 8.08 ")to estimate initial spatial extent for simple fitting
[Wed Mar  7 11:14:56 2012] Initial guess for spatial extent in simple fitting = 8.08"
[Wed Mar  7 11:14:56 2012] source mask rpix=1.9, npix_max = 22, mask sum = 20, frac = 0.900
[Wed Mar  7 11:14:56 2012] Giving source the simple spatial ID 14 for pass 0, mean size = 8.08"
[Wed Mar  7 17:54:35 2012] fullrun_pn_xmm0164560501_pi300-10000_cl_pass0_src14.ximg exists
[Wed Mar  7 17:54:35 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0164560501_pi300-10000_cl_pass0_src14.csv
[Wed Mar  7 17:54:35 2012] fullrun_pn_xmm0164560501_pi300-10000_cl_pass0_src14_1.ximg exists
[Wed Mar  7 17:54:35 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0164560501_pi300-10000_cl_pass0_src14.csv
[Wed Mar  7 17:54:35 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0164560501_pi300-10000_cl_pass0_src14_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0164560501_pi300-10000_cl_pass0_src14.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Mar  7 17:54:36 2012] fullrun_pn_xmm0164560501_pi300-10000_cl_pass0_tfrozen_src14.ximg exists
[Wed Mar  7 17:54:36 2012] fullrun_pn_xmm0164560501_pi300-10000_cl_pass0_tfrozen_src14_1.ximg exists
[Wed Mar  7 17:54:36 2012] Fit fullrun_pn_xmm0164560501_pi300-10000_cl_pass0_tfrozen_src14 appears to have run properly
[Wed Mar  7 18:38:20 2012] Spatial fit model total counts = 1105.070000, observed total counts = 1105.000000
[Wed Mar  7 18:38:20 2012] Offset between fit and detection position for source 14 = 2.848520 pixels
[Wed Mar  7 18:38:20 2012] Warning, changing simple spatial fit ID from 14 to 13
[Wed Mar  7 18:38:20 2012] 1117.360000 total counts/ 503.813000 bgd. counts: snr = 27.334627
Spatial fit parameters:
  Offset between fit and detection position for source 14 = 2.848520 pixels
  Position = (335.1, 276.2) = 7 20 12.32 -31 29 4.7
  Extent = 15.5 (15.5-31.1)", rotation angle = 0
  Source counts = 613.5 +/- 33.4
  Background counts = 503.8
  Rate = 0.03 +/- 0.001
[Wed Mar  7 18:38:20 2012] Vigneting correction estimate = 1.000000
[Wed Mar  7 18:38:20 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Mar  7 18:38:20 2012] Assessing source extent using major axis lower bound
[Wed Mar  7 18:38:20 2012] Source does appear to be extended
[Wed Mar  7 18:38:20 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Mar  7 18:38:20 2012] Source is confused with source 11
[Wed Mar  7 18:38:40 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed Mar  7 18:38:40 2012] Initial guess for spatial extent in simple fitting = 15.53"
[Wed Mar  7 18:38:40 2012] source mask rpix=3.6, npix_max = 66, mask sum = 64, frac = 0.966
[Wed Mar  7 18:38:40 2012] Giving source the simple spatial ID 14 for pass 1, mean size = 15.53"
[Wed Mar  7 21:31:44 2012] fullrun_pn_xmm0164560501_pi300-10000_cl_pass1_src14.ximg exists
[Wed Mar  7 21:31:44 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0164560501_pi300-10000_cl_pass1_src14.csv
[Wed Mar  7 21:31:44 2012] fullrun_pn_xmm0164560501_pi300-10000_cl_pass1_src14_1.ximg exists
[Wed Mar  7 21:31:44 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0164560501_pi300-10000_cl_pass1_src14.csv
[Wed Mar  7 21:31:44 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0164560501_pi300-10000_cl_pass1_src14_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0164560501_pi300-10000_cl_pass1_src14.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Mar  7 21:31:45 2012] fullrun_pn_xmm0164560501_pi300-10000_cl_pass1_tfrozen_src14.ximg exists
[Wed Mar  7 21:31:45 2012] fullrun_pn_xmm0164560501_pi300-10000_cl_pass1_tfrozen_src14_1.ximg exists
[Wed Mar  7 21:31:45 2012] Fit fullrun_pn_xmm0164560501_pi300-10000_cl_pass1_tfrozen_src14 appears to have run properly
[Wed Mar  7 22:11:53 2012] Warning, spatial fit 14 centroid is now closest to src. 11
[Wed Mar  7 22:11:53 2012] Vigneting correction estimate = 1.000000
[Wed Mar  7 22:11:53 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Mar  7 22:11:53 2012] Assessing source extent using major axis lower bound
[Wed Mar  7 22:11:53 2012] Source does appear to be extended
[Wed Mar  7 22:11:53 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Mar  7 22:12:09 2012] XMMSAS src. selection expression = ellipse(29100.898000, 23983.284000, 931.626027, 931.626027, 0.000000, X, Y)
[Wed Mar  7 22:12:09 2012] Writing source region out to fullrun_pn_xmm0164560501_pi300-10000_pass1_cl_src14_src.reg
[Wed Mar  7 22:12:09 2012] Extracting stamp from image fullrun_pn_xmm0164560501_pi300-10000_cl_sm2.00.img.gz, (282, 223) - (389, 330)
[Wed Mar  7 22:12:10 2012] XMMSAS bgd. selection expression = annulus(29100.898000, 23983.284000, 1552.710045, 3105.420089, X, Y) && !ellipse(32631.116000, 19796.096000, 1595.400046, 1595.400046, 0.000000, X, Y) && !ellipse(25842.808000, 27860.223500, 1436.294441, 1436.294441, 0.000000, X, Y) && !ellipse(26929.332000, 26594.296000, 1126.400032, 1126.400032, 0.000000, X, Y) && !ellipse(27595.684000, 25834.786000, 2252.800065, 2252.800065, 0.000000, X, Y) && !ellipse(28540.656000, 24687.932000, 2362.128068, 2362.128068, 0.000000, X, Y) && !ellipse(28735.810000, 24409.044000, 1208.304035, 1208.304035, 0.000000, X, Y) && !ellipse(29432.170000, 23562.502000, 2839.848082, 2839.848082, 0.000000, X, Y) && !ellipse(30131.556000, 22762.984000, 1424.952041, 1424.952041, 0.000000, X, Y) && !ellipse(26660.063264, 22340.681800, 338.332810, 338.332810, 0.000000, X, Y) && !ellipse(30919.646000, 21762.038000, 1424.952041, 1424.952041, 0.000000, X, Y) && !ellipse(31517.104049, 21218.888137, 2416.608070, 474.578009, 50.366208, X, Y) && !ellipse(31805.098000, 20788.156000, 1595.400046, 1595.400046, 0.000000, X, Y) && !ellipse(27801.967092, 20692.472683, 534.883306, 350.272841, 1.007790, X, Y) && !ellipse(32055.770000, 20274.086000, 3116.912090, 3116.912090, 0.000000, X, Y) && !ellipse(29913.760000, 22989.106000, 1324.456038, 1324.456038, 0.000000, X, Y)
[Wed Mar  7 22:12:10 2012] Writing fullrun_pn_xmm0164560501_pi300-10000_pass1_cl_src14.gif
[Wed Mar  7 23:01:41 2012] Mean detx,y = (144.49, 4978.92) 
[Wed Mar  7 23:01:44 2012] Setting backscal keywords in source and bgd. spectrum
[Wed Mar  7 23:02:02 2012] Binned source spectrum to 10 counts/bin
[Wed Mar  7 23:02:03 2012] Setting source spectrum file to fullrun_pn_xmm0164560501_pi300-10000_pass1_cl_src14_src_b10.pi.gz
[Wed Mar  7 23:02:03 2012] Setting bgd. spectrum file to fullrun_pn_xmm0164560501_pi300-10000_pass1_cl_src14_bgd.pi.gz
[Thu Mar  8 23:10:28 2012] Updating aperture counts using extracted products
[Thu Mar  8 23:10:28 2012] Error reading totcts from fullrun_pn_xmm0164560501_pi300-10000_pass1_cl_src14_src_b10.pi.gz
[Thu Mar  8 23:10:31 2012] Calculating source flux in energy range 0.30-8.00
[Thu Mar  8 23:10:31 2012] Using photon index=1.80, rate=0.0254, arf fullrun_pn_xmm0164560501_pi300-10000_pass1_cl_src14.arf
[Thu Mar  8 23:10:31 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Mar  8 23:10:31 2012] Updating source flux to 7.3e-14
[Thu Mar  8 23:11:49 2012] Flag c found in src. 14 procflags, skipping spectral fitting