[Wed Mar  7 11:09:16 2012] Detection parameters:
  Position = (297.8, 320.8) = 7 20 24.98 -31 25 51.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 47366.5 +/- 257.8
  Background counts = 196.1
  Rate = 1 +/- 0.006

[Wed Mar  7 11:09:16 2012] Off-axis axis estimate = 1.62'
[Wed Mar  7 18:22:22 2012] Using EEF radius (= 7.24 ")to estimate initial spatial extent for simple fitting
[Wed Mar  7 18:22:22 2012] Initial guess for spatial extent in simple fitting = 7.24"
[Wed Mar  7 18:22:22 2012] source mask rpix=1.7, npix_max = 18, mask sum = 16, frac = 0.854
[Wed Mar  7 18:22:22 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 7.24"
[Wed Mar  7 18:38:05 2012] fullrun_mos2_xmm0164560501_pi300-10000_cl_pass0_src1.ximg exists
[Wed Mar  7 18:38:05 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0164560501_pi300-10000_cl_pass0_src1.csv
[Wed Mar  7 18:38:05 2012] fullrun_mos2_xmm0164560501_pi300-10000_cl_pass0_src1_1.ximg exists
[Wed Mar  7 18:38:05 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0164560501_pi300-10000_cl_pass0_src1.csv
[Wed Mar  7 18:38:05 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0164560501_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0164560501_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Mar  7 18:38:05 2012] fullrun_mos2_xmm0164560501_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Wed Mar  7 18:38:05 2012] fullrun_mos2_xmm0164560501_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Wed Mar  7 18:38:05 2012] Fit fullrun_mos2_xmm0164560501_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Wed Mar  7 18:38:27 2012] Spatial fit model total counts = 26119.300000, observed total counts = 25639.000000
[Wed Mar  7 18:38:27 2012] Offset between fit and detection position for source 2 = 0.146979 pixels
[Wed Mar  7 18:38:27 2012] 26085.540000 total counts/ 6057.740000 bgd. counts: snr = 257.322600
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.146979 pixels
  Position = (297.7, 320.7) = 7 20 25.02 -31 25 51.2
  Extent = 5.6 (5.6-5.7)", rotation angle = 0
  Source counts = 20027.8 +/- 161.5
  Background counts = 6057.7
  Rate = 0.7 +/- 0.006
[Wed Mar  7 18:38:27 2012] Vigneting correction estimate = 1.000000
[Wed Mar  7 18:38:27 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Mar  7 18:38:27 2012] Assessing source extent using major axis lower bound
[Wed Mar  7 18:38:27 2012] Source does appear to be extended
[Wed Mar  7 18:38:27 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Mar  7 21:56:43 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed Mar  7 21:56:43 2012] Initial guess for spatial extent in simple fitting = 5.64"
[Wed Mar  7 21:56:43 2012] source mask rpix=1.3, npix_max = 12, mask sum = 12, frac = 0.930
[Wed Mar  7 21:56:43 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 5.64"
[Wed Mar  7 22:11:38 2012] fullrun_mos2_xmm0164560501_pi300-10000_cl_pass1_src1.ximg exists
[Wed Mar  7 22:11:38 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0164560501_pi300-10000_cl_pass1_src1.csv
[Wed Mar  7 22:11:38 2012] fullrun_mos2_xmm0164560501_pi300-10000_cl_pass1_src1_1.ximg exists
[Wed Mar  7 22:11:38 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0164560501_pi300-10000_cl_pass1_src1.csv
[Wed Mar  7 22:11:38 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0164560501_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0164560501_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Mar  7 22:11:38 2012] fullrun_mos2_xmm0164560501_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Wed Mar  7 22:11:38 2012] fullrun_mos2_xmm0164560501_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Wed Mar  7 22:11:38 2012] Fit fullrun_mos2_xmm0164560501_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Wed Mar  7 22:11:56 2012] Spatial fit model total counts = 26308.900000, observed total counts = 25662.000000
[Wed Mar  7 22:11:56 2012] Offset between fit and detection position for source 2 = 0.021895 pixels
[Wed Mar  7 22:11:56 2012] 26522.350000 total counts/ 6701.250000 bgd. counts: snr = 242.130692
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.021895 pixels
  Position = (297.7, 320.7) = 7 20 25.03 -31 25 51.3
  Extent = 5.6 (5.5-5.6)", rotation angle = 0
  Source counts = 19821.1 +/- 162.9
  Background counts = 6701.2
  Rate = 0.7 +/- 0.006
[Wed Mar  7 22:11:56 2012] Vigneting correction estimate = 1.000000
[Wed Mar  7 22:11:56 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Mar  7 22:11:56 2012] Assessing source extent using major axis lower bound
[Wed Mar  7 22:11:56 2012] Source does appear to be extended
[Wed Mar  7 22:11:56 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Mar  8 22:52:33 2012] Counts = 19821.100000, rescaling region sizes by 3.000000
[Thu Mar  8 22:52:33 2012] XMMSAS src. selection expression = ellipse(25848.969800, 27851.763600, 1001.757629, 1001.757629, 0.000000, X, Y)
[Thu Mar  8 22:52:33 2012] Writing source region out to fullrun_mos2_xmm0164560501_pi300-10000_pass1_cl_src2_src.reg
[Thu Mar  8 22:52:33 2012] Extracting stamp from image fullrun_mos2_xmm0164560501_pi300-10000_cl_sm2.00.img.gz, (240, 263) - (355, 378)
[Thu Mar  8 22:52:33 2012] XMMSAS bgd. selection expression = annulus(25848.969800, 27851.763600, 5008.788144, 10017.576288, X, Y) && !ellipse(29457.775640, 30987.517600, 364.211210, 364.211210, 0.000000, X, Y) && !ellipse(19836.710200, 21311.709800, 554.804816, 396.096011, 18.967600, X, Y) && !ellipse(27052.000000, 27447.750702, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30526.356600, 31920.526000, 417.713612, 417.713612, 0.000000, X, Y) && !ellipse(26025.916138, 28850.766418, 870.000000, 870.000000, 0.000000, X, Y)
[Thu Mar  8 22:52:33 2012] Writing fullrun_mos2_xmm0164560501_pi300-10000_pass1_cl_src2.gif
[Thu Mar  8 22:52:45 2012] Mean detx,y = (23.08, -99.25) 
[Thu Mar  8 22:52:47 2012] Setting backscal keywords in source and bgd. spectrum
[Thu Mar  8 22:57:33 2012] Binned source spectrum to 10 counts/bin
[Thu Mar  8 22:57:33 2012] Setting source spectrum file to fullrun_mos2_xmm0164560501_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Thu Mar  8 22:57:33 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0164560501_pi300-10000_pass1_cl_src2_bgd.pi.gz
[Thu Mar  8 23:10:32 2012] Updating aperture counts using extracted products
[Thu Mar  8 23:10:33 2012] Error reading totcts from fullrun_mos2_xmm0164560501_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Thu Mar  8 23:10:33 2012] Calculating source flux in energy range 0.30-8.00
[Thu Mar  8 23:10:33 2012] Using photon index=1.80, rate=0.742, arf fullrun_mos2_xmm0164560501_pi300-10000_pass1_cl_src2.arf
[Thu Mar  8 23:10:33 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Mar  8 23:10:33 2012] Updating source flux to 7.3e-12
[Thu Mar  8 23:11:49 2012] Reading fit data from xmm0164560501/analysis//spectral/fullrun_mos2_xmm0164560501_pi300-10000_pass1_cl_src2_pl.csv
[Thu Mar  8 23:11:49 2012] Spectral fit parameter nH value = 2.24061e+21
[Thu Mar  8 23:11:49 2012] Spectral fit parameter PhoIndex value = 7.34806
[Thu Mar  8 23:11:49 2012] Failed to get F(0.3-8.0) from xmm0164560501/analysis//spectral/fullrun_mos2_xmm0164560501_pi300-10000_pass1_cl_src2_pl.csv, possibly due to different flux energy range selected
[Thu Mar  8 23:11:49 2012] Calculating source flux in energy range 0.30-8.00
[Thu Mar  8 23:11:49 2012] Using Nh = 2.2e+21, photon index=7.35, rate=0.742, arf fullrun_mos2_xmm0164560501_pi300-10000_pass1_cl_src2.arf
[Thu Mar  8 23:11:49 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Mar  8 23:11:49 2012] Updating source flux to 4.7e-12