[Wed Mar  7 11:08:38 2012] Detection parameters:
  Position = (297.8, 320.8) = 7 20 24.99 -31 25 51.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 48129.6 +/- 263.6
  Background counts = 208.7
  Rate = 1 +/- 0.006

[Wed Mar  7 11:08:39 2012] Off-axis axis estimate = 1.62'
[Wed Mar  7 17:54:37 2012] Using EEF radius (= 7.24 ")to estimate initial spatial extent for simple fitting
[Wed Mar  7 17:54:37 2012] Initial guess for spatial extent in simple fitting = 7.24"
[Wed Mar  7 17:54:37 2012] source mask rpix=1.7, npix_max = 18, mask sum = 16, frac = 0.854
[Wed Mar  7 17:54:37 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 7.24"
[Wed Mar  7 18:22:21 2012] fullrun_mos1_xmm0164560501_pi300-10000_cl_pass0_src1.ximg exists
[Wed Mar  7 18:22:21 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0164560501_pi300-10000_cl_pass0_src1.csv
[Wed Mar  7 18:22:21 2012] fullrun_mos1_xmm0164560501_pi300-10000_cl_pass0_src1_1.ximg exists
[Wed Mar  7 18:22:21 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0164560501_pi300-10000_cl_pass0_src1.csv
[Wed Mar  7 18:22:21 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0164560501_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0164560501_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Mar  7 18:22:22 2012] fullrun_mos1_xmm0164560501_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Wed Mar  7 18:22:22 2012] fullrun_mos1_xmm0164560501_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Wed Mar  7 18:22:22 2012] Fit fullrun_mos1_xmm0164560501_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Wed Mar  7 18:38:24 2012] Spatial fit model total counts = 25597.900000, observed total counts = 25598.000000
[Wed Mar  7 18:38:24 2012] Offset between fit and detection position for source 2 = 0.134234 pixels
[Wed Mar  7 18:38:24 2012] 25564.600000 total counts/ 5406.500000 bgd. counts: snr = 274.152046
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.134234 pixels
  Position = (297.7, 320.8) = 7 20 25.03 -31 25 51.0
  Extent = 5.7 (5.7-5.8)", rotation angle = 0
  Source counts = 20158.1 +/- 159.9
  Background counts = 5406.5
  Rate = 0.8 +/- 0.006
[Wed Mar  7 18:38:24 2012] Vigneting correction estimate = 1.000000
[Wed Mar  7 18:38:24 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Mar  7 18:38:24 2012] Assessing source extent using major axis lower bound
[Wed Mar  7 18:38:24 2012] Source does appear to be extended
[Wed Mar  7 18:38:24 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Mar  7 21:31:45 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed Mar  7 21:31:45 2012] Initial guess for spatial extent in simple fitting = 5.74"
[Wed Mar  7 21:31:45 2012] source mask rpix=1.3, npix_max = 13, mask sum = 12, frac = 0.906
[Wed Mar  7 21:31:45 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 5.74"
[Wed Mar  7 21:56:42 2012] fullrun_mos1_xmm0164560501_pi300-10000_cl_pass1_src1.ximg exists
[Wed Mar  7 21:56:42 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0164560501_pi300-10000_cl_pass1_src1.csv
[Wed Mar  7 21:56:42 2012] fullrun_mos1_xmm0164560501_pi300-10000_cl_pass1_src1_1.ximg exists
[Wed Mar  7 21:56:42 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0164560501_pi300-10000_cl_pass1_src1.csv
[Wed Mar  7 21:56:42 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0164560501_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0164560501_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Mar  7 21:56:42 2012] fullrun_mos1_xmm0164560501_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Wed Mar  7 21:56:42 2012] fullrun_mos1_xmm0164560501_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Wed Mar  7 21:56:42 2012] Fit fullrun_mos1_xmm0164560501_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Wed Mar  7 22:11:55 2012] Warning, spatial fit 1 centroid is now closest to src. 8
[Wed Mar  7 22:11:55 2012] Vigneting correction estimate = 1.000000
[Wed Mar  7 22:11:55 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Mar  7 22:11:55 2012] Assessing source extent using major axis lower bound
[Wed Mar  7 22:11:55 2012] Source does appear to be extended
[Wed Mar  7 22:11:55 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Mar  8 22:28:15 2012] Counts = 20158.100000, rescaling region sizes by 3.000000
[Thu Mar  8 22:28:15 2012] XMMSAS src. selection expression = ellipse(25848.408600, 27856.964400, 1033.057830, 1033.057830, 0.000000, X, Y)
[Thu Mar  8 22:28:15 2012] Writing source region out to fullrun_mos1_xmm0164560501_pi300-10000_pass1_cl_src2_src.reg
[Thu Mar  8 22:28:15 2012] Extracting stamp from image fullrun_mos1_xmm0164560501_pi300-10000_cl_sm2.00.img.gz, (238, 261) - (357, 380)
[Thu Mar  8 22:28:15 2012] XMMSAS bgd. selection expression = annulus(25848.408600, 27856.964400, 5165.289149, 10330.578297, X, Y) && !ellipse(29458.701940, 30976.492000, 429.181612, 429.181612, 0.000000, X, Y) && !ellipse(19853.526800, 21322.405000, 434.275212, 434.275212, 0.000000, X, Y) && !ellipse(30546.144400, 31888.330400, 332.644010, 332.644010, 0.000000, X, Y) && !ellipse(17300.001724, 28433.966644, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36954.083099, 26885.649139, 1740.000000, 1740.000000, 0.000000, X, Y)
[Thu Mar  8 22:28:15 2012] Writing fullrun_mos1_xmm0164560501_pi300-10000_pass1_cl_src2.gif
[Thu Mar  8 22:28:20 2012] Mean detx,y = (124.86, -178.02) 
[Thu Mar  8 22:28:22 2012] Setting backscal keywords in source and bgd. spectrum
[Thu Mar  8 22:32:52 2012] Binned source spectrum to 10 counts/bin
[Thu Mar  8 22:32:52 2012] Setting source spectrum file to fullrun_mos1_xmm0164560501_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Thu Mar  8 22:32:52 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0164560501_pi300-10000_pass1_cl_src2_bgd.pi.gz
[Thu Mar  8 23:10:32 2012] Updating aperture counts using extracted products
[Thu Mar  8 23:10:32 2012] Error reading totcts from fullrun_mos1_xmm0164560501_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Thu Mar  8 23:10:32 2012] Calculating source flux in energy range 0.30-8.00
[Thu Mar  8 23:10:32 2012] Using photon index=1.80, rate=0.757, arf fullrun_mos1_xmm0164560501_pi300-10000_pass1_cl_src2.arf
[Thu Mar  8 23:10:32 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Mar  8 23:10:32 2012] Updating source flux to 6.7e-12
[Thu Mar  8 23:11:19 2012] Reading fit data from xmm0164560501/analysis//spectral/fullrun_mos1_xmm0164560501_pi300-10000_pass1_cl_src2_pl.csv
[Thu Mar  8 23:11:19 2012] Spectral fit parameter nH value = 2.13529e+21
[Thu Mar  8 23:11:19 2012] Spectral fit parameter PhoIndex value = 7.26902
[Thu Mar  8 23:11:19 2012] Failed to get F(0.3-8.0) from xmm0164560501/analysis//spectral/fullrun_mos1_xmm0164560501_pi300-10000_pass1_cl_src2_pl.csv, possibly due to different flux energy range selected
[Thu Mar  8 23:11:19 2012] Calculating source flux in energy range 0.30-8.00
[Thu Mar  8 23:11:19 2012] Using Nh = 2.1e+21, photon index=7.27, rate=0.757, arf fullrun_mos1_xmm0164560501_pi300-10000_pass1_cl_src2.arf
[Thu Mar  8 23:11:19 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Mar  8 23:11:19 2012] Updating source flux to 4.4e-12