[Mon May 21 05:14:34 2012] Detection parameters:
  Position = (325.3, 265.4) = 5 46 8.35 -0 10 1.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 131.7 +/- 17.6
  Background counts = 54.7
  Rate = 0.005 +/- 0.0006

[Mon May 21 05:14:35 2012] Off-axis axis estimate = 3.09'
[Mon May 21 05:17:39 2012] Using EEF radius (= 7.97 ")to estimate initial spatial extent for simple fitting
[Mon May 21 05:17:39 2012] Initial guess for spatial extent in simple fitting = 7.97"
[Mon May 21 05:17:39 2012] source mask rpix=1.8, npix_max = 21, mask sum = 25, frac = 1.149
[Mon May 21 05:17:39 2012] Giving source the simple spatial ID 40 for pass 0, mean size = 7.97"
[Mon May 21 06:35:12 2012] fullrun_pn_xmm0164560201_pi300-10000_cl_pass0_src40.ximg exists
[Mon May 21 06:35:12 2012] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0164560201_pi300-10000_cl_pass0_src40.csv
[Mon May 21 06:35:12 2012] fullrun_pn_xmm0164560201_pi300-10000_cl_pass0_src40_1.ximg exists
[Mon May 21 06:35:12 2012] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0164560201_pi300-10000_cl_pass0_src40.csv
[Mon May 21 06:35:12 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0164560201_pi300-10000_cl_pass0_src40_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0164560201_pi300-10000_cl_pass0_src40.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 21 06:35:12 2012] fullrun_pn_xmm0164560201_pi300-10000_cl_pass0_tfrozen_src40.ximg exists
[Mon May 21 06:35:12 2012] fullrun_pn_xmm0164560201_pi300-10000_cl_pass0_tfrozen_src40_1.ximg exists
[Mon May 21 06:35:12 2012] Fit fullrun_pn_xmm0164560201_pi300-10000_cl_pass0_tfrozen_src40 appears to have run properly
[Mon May 21 08:47:50 2012] Source 45 is offset by 7.370025 and -6.670443 pixels which is larger than
2 X fitted extent = 7.329885 x 7.329885, not incorporating fit results
[Mon May 21 08:47:50 2012] Vigneting correction estimate = 1.000000
[Mon May 21 08:47:50 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon May 21 08:47:50 2012] Assessing source extent using major
[Mon May 21 08:47:50 2012] Source does appear to be extended
[Mon May 21 08:47:50 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon May 21 08:48:17 2012] Using EEF radius (= 7.97 ")to estimate initial spatial extent for simple fitting
[Mon May 21 08:48:17 2012] Initial guess for spatial extent in simple fitting = 7.97"
[Mon May 21 08:48:17 2012] source mask rpix=1.8, npix_max = 21, mask sum = 25, frac = 1.149
[Mon May 21 08:48:17 2012] Giving source the simple spatial ID 39 for pass 1, mean size = 7.97"
[Mon May 21 10:20:01 2012] fullrun_pn_xmm0164560201_pi300-10000_cl_pass1_src39.ximg exists
[Mon May 21 10:20:01 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0164560201_pi300-10000_cl_pass1_src39.csv
[Mon May 21 10:20:01 2012] fullrun_pn_xmm0164560201_pi300-10000_cl_pass1_src39_1.ximg exists
[Mon May 21 10:20:01 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0164560201_pi300-10000_cl_pass1_src39.csv
[Mon May 21 10:20:01 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0164560201_pi300-10000_cl_pass1_src39_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0164560201_pi300-10000_cl_pass1_src39.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 21 10:20:02 2012] fullrun_pn_xmm0164560201_pi300-10000_cl_pass1_tfrozen_src39.ximg exists
[Mon May 21 10:20:02 2012] fullrun_pn_xmm0164560201_pi300-10000_cl_pass1_tfrozen_src39_1.ximg exists
[Mon May 21 10:20:02 2012] Fit fullrun_pn_xmm0164560201_pi300-10000_cl_pass1_tfrozen_src39 appears to have run properly
[Mon May 21 13:09:30 2012] Spatial fit model total counts = 570.000000, observed total counts = 570.000000
[Mon May 21 13:09:30 2012] Offset between fit and detection position for source 45 = 0.253089 pixels
[Mon May 21 13:09:30 2012] 578.717000 total counts/ 465.025000 bgd. counts: snr = 5.272199
Spatial fit parameters:
  Offset between fit and detection position for source 45 = 0.253089 pixels
  Position = (325.3, 265.6) = 5 46 8.35 -0 10 0.7
  Extent = 7.1 (5.3-9.0)", rotation angle = 0
  Source counts = 113.7 +/- 24.1
  Background counts = 465.0
  Rate = 0.003 +/- 0.0007
[Mon May 21 13:09:30 2012] Vigneting correction estimate = 1.000000
[Mon May 21 13:09:30 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon May 21 13:09:30 2012] Assessing source extent using major axis lower bound
[Mon May 21 13:09:30 2012] Source does appear to be extended
[Mon May 21 13:09:30 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon May 21 13:10:10 2012] XMMSAS src. selection expression = ellipse(28249.221600, 23063.024800, 426.945612, 426.945612, 0.000000, X, Y)
[Mon May 21 13:10:10 2012] Writing source region out to fullrun_pn_xmm0164560201_pi300-10000_pass1_cl_src45_src.reg
[Mon May 21 13:10:10 2012] Extracting stamp from image fullrun_pn_xmm0164560201_pi300-10000_cl_sm2.00.img.gz, (301, 241) - (350, 290)
[Mon May 21 13:10:10 2012] XMMSAS bgd. selection expression = annulus(28249.221600, 23063.024800, 711.576020, 1423.152041, X, Y)
[Mon May 21 13:10:10 2012] Writing fullrun_pn_xmm0164560201_pi300-10000_pass1_cl_src45.gif
[Mon May 21 14:07:08 2012] Mean detx,y = (949.10, 4566.79) 
[Mon May 21 14:07:14 2012] Setting backscal keywords in source and bgd. spectrum
[Mon May 21 14:07:33 2012] Binned source spectrum to 10 counts/bin
[Mon May 21 14:07:34 2012] Setting source spectrum file to fullrun_pn_xmm0164560201_pi300-10000_pass1_cl_src45_src_b10.pi.gz
[Mon May 21 14:07:34 2012] Setting bgd. spectrum file to fullrun_pn_xmm0164560201_pi300-10000_pass1_cl_src45_bgd.pi.gz
[Mon May 21 16:53:47 2012] Updating aperture counts using extracted products
[Mon May 21 16:53:47 2012] Error reading totcts from fullrun_pn_xmm0164560201_pi300-10000_pass1_cl_src45_src_b10.pi.gz
[Mon May 21 16:53:51 2012] Calculating source flux in energy range 0.30-8.00
[Mon May 21 16:53:51 2012] Using photon index=1.80, rate=0.00348, arf fullrun_pn_xmm0164560201_pi300-10000_pass1_cl_src45.arf
[Mon May 21 16:53:51 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon May 21 16:53:51 2012] Updating source flux to 1.1e-14
[Mon May 21 16:56:58 2012] Flag b found in src. 45 procflags, skipping spectral fitting