[Sat Jun  1 01:20:36 2013] Detection parameters:
  Position = (278.7, 403.3) = 16 57 55.44 35 30 4.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 85.6 +/- 14.2
  Background counts = 70.0
  Rate = 0.03 +/- 0.004

[Sat Jun  1 01:20:41 2013] Off-axis axis estimate = 7.73'
[Sat Jun  1 01:27:03 2013] Using EEF radius (= 10.30 ")to estimate initial spatial extent for simple fitting
[Sat Jun  1 01:27:03 2013] Initial guess for spatial extent in simple fitting = 10.30"
[Sat Jun  1 01:27:03 2013] source mask rpix=2.4, npix_max = 32, mask sum = 19, frac = 0.578
[Sat Jun  1 01:27:03 2013] Giving source the simple spatial ID 6 for pass 0, mean size = 10.30"
[Sat Jun  1 09:21:53 2013] fullrun_pn_xmm0163960301_pi300-10000_cl_pass0_src6.ximg exists
[Sat Jun  1 09:21:53 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0163960301_pi300-10000_cl_pass0_src6.csv
[Sat Jun  1 09:21:53 2013] fullrun_pn_xmm0163960301_pi300-10000_cl_pass0_src6_1.ximg exists
[Sat Jun  1 09:21:53 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0163960301_pi300-10000_cl_pass0_src6.csv
[Sat Jun  1 09:21:53 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0163960301_pi300-10000_cl_pass0_src6_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0163960301_pi300-10000_cl_pass0_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun  1 09:21:55 2013] fullrun_pn_xmm0163960301_pi300-10000_cl_pass0_tfrozen_src6.ximg exists
[Sat Jun  1 09:21:55 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0163960301_pi300-10000_cl_pass0_tfrozen_src6.csv
[Sat Jun  1 09:21:55 2013] fullrun_pn_xmm0163960301_pi300-10000_cl_pass0_tfrozen_src6_1.ximg exists
[Sat Jun  1 09:21:55 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0163960301_pi300-10000_cl_pass0_tfrozen_src6.csv
[Sat Jun  1 09:21:55 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0163960301_pi300-10000_cl_pass0_tfrozen_src6_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0163960301_pi300-10000_cl_pass0_tfrozen_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun  1 09:49:33 2013] Warning, spatial fit 6 centroid is now closest to src. 8
[Sat Jun  1 09:49:34 2013] Vigneting correction estimate = 1.000000
[Sat Jun  1 09:49:34 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun  1 09:49:34 2013] Assessing source extent using major
[Sat Jun  1 09:49:34 2013] Source does appear to be extended
[Sat Jun  1 09:49:34 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun  1 09:49:34 2013] Source is confused with source 5
[Sat Jun  1 09:49:54 2013] Using EEF radius (= 10.30 ")to estimate initial spatial extent for simple fitting
[Sat Jun  1 09:49:54 2013] Initial guess for spatial extent in simple fitting = 10.30"
[Sat Jun  1 09:49:54 2013] source mask rpix=2.4, npix_max = 32, mask sum = 19, frac = 0.578
[Sat Jun  1 09:49:54 2013] Giving source the simple spatial ID 6 for pass 1, mean size = 10.30"
[Sat Jun  1 15:56:50 2013] fullrun_pn_xmm0163960301_pi300-10000_cl_pass1_src6.ximg exists
[Sat Jun  1 15:56:50 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0163960301_pi300-10000_cl_pass1_src6.csv
[Sat Jun  1 15:56:50 2013] fullrun_pn_xmm0163960301_pi300-10000_cl_pass1_src6_1.ximg exists
[Sat Jun  1 15:56:50 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0163960301_pi300-10000_cl_pass1_src6.csv
[Sat Jun  1 15:56:50 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0163960301_pi300-10000_cl_pass1_src6_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0163960301_pi300-10000_cl_pass1_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun  1 15:56:52 2013] fullrun_pn_xmm0163960301_pi300-10000_cl_pass1_tfrozen_src6.ximg exists
[Sat Jun  1 15:56:52 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0163960301_pi300-10000_cl_pass1_tfrozen_src6.csv
[Sat Jun  1 15:56:52 2013] fullrun_pn_xmm0163960301_pi300-10000_cl_pass1_tfrozen_src6_1.ximg exists
[Sat Jun  1 15:56:52 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0163960301_pi300-10000_cl_pass1_tfrozen_src6.csv
[Sat Jun  1 15:56:52 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0163960301_pi300-10000_cl_pass1_tfrozen_src6_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0163960301_pi300-10000_cl_pass1_tfrozen_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun  1 16:23:17 2013] Spatial fit model total counts = 490.832000, observed total counts = 421.000000
[Sat Jun  1 16:23:17 2013] Poor agreement between spatial fit and data for source 6
It may help to tweak spatial fit manually
Not incorporating fit results
[Sat Jun  1 16:23:17 2013] Warning, spatial fit 6 centroid is now closest to src. 8
[Sat Jun  1 16:23:17 2013] Vigneting correction estimate = 1.000000
[Sat Jun  1 16:23:17 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun  1 16:23:17 2013] Assessing source extent using major
[Sat Jun  1 16:23:17 2013] Source does appear to be extended
[Sat Jun  1 16:23:17 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun  1 16:23:37 2013] XMMSAS src. selection expression = ellipse(24198.963928, 35035.203156, 652.500000, 652.500000, 0.000000, X, Y)
[Sat Jun  1 16:23:37 2013] Writing source region out to fullrun_pn_xmm0163960301_pi300-10000_pass1_cl_src6_src.reg
[Sat Jun  1 16:23:37 2013] Extracting stamp from image fullrun_pn_xmm0163960301_pi300-10000_cl_sm2.00.img.gz, (241, 366) - (316, 441)
[Sat Jun  1 16:23:37 2013] XMMSAS bgd. selection expression = annulus(24198.963928, 35035.203156, 1087.500000, 2175.000000, X, Y) && !ellipse(23940.579132, 37095.089050, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24672.836212, 35789.961609, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24393.304108, 35441.013763, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24457.770874, 34387.423798, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25265.550262, 34237.183655, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25180.504364, 33788.337677, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25103.991730, 33023.362671, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25937.700134, 32479.679047, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25261.161499, 32325.700623, 870.000000, 870.000000, 0.000000, X, Y)
[Sat Jun  1 16:23:37 2013] Writing fullrun_pn_xmm0163960301_pi300-10000_pass1_cl_src6.gif
[Sat Jun  1 16:27:34 2013] Mean detx,y = (-2602.85, 10600.21) 
[Sat Jun  1 16:27:39 2013] Setting backscal keywords in source and bgd. spectrum
[Sat Jun  1 16:28:26 2013] Binned source spectrum to 10 counts/bin
[Sat Jun  1 16:28:27 2013] Setting source spectrum file to fullrun_pn_xmm0163960301_pi300-10000_pass1_cl_src6_src_b10.pi.gz
[Sat Jun  1 16:28:27 2013] Setting bgd. spectrum file to fullrun_pn_xmm0163960301_pi300-10000_pass1_cl_src6_bgd.pi.gz
[Sat Jun  1 17:13:11 2013] Not generating rmf since there are only 85 counts
[Sat Jun  1 17:13:11 2013] rmf not generated due to insufficient counts
[Sat Jun  1 18:44:25 2013] Updating aperture counts using extracted products
[Sat Jun  1 18:44:26 2013] Total counts from fullrun_pn_xmm0163960301_pi300-10000_pass1_cl_src6_src_b10.pi.gz = 188.00
[Sat Jun  1 18:44:26 2013] Total counts from fullrun_pn_xmm0163960301_pi300-10000_pass1_cl_src6_bgd.pi.gz = 665.00
[Sat Jun  1 18:44:26 2013] Got source and background scale factors 946348.000000, 5789915.000000
[Sat Jun  1 18:44:26 2013] User source parameters:
  Position = (278.7, 403.3) = 16 57 55.44 35 30 4.5
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 79.3 +/- 14.7
  Background aperture counts = 108.7
  Rate = 0.2 +/- 0.03

[Sat Jun  1 18:44:26 2013] Updating counts from extracted products
[Sat Jun  1 18:44:26 2013] Set source signif. to 79.31/10.43 = 7.61
[Sat Jun  1 18:44:50 2013] Calculating source flux in energy range 0.30-8.00
[Sat Jun  1 18:44:50 2013] Using photon index=1.80, rate=0.164, arf fullrun_pn_xmm0163960301_pi300-10000_pass1_cl_src6.arf
[Sat Jun  1 18:44:50 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Jun  1 18:44:50 2013] Updating source flux to 3.9e-12
[Sat Jun  1 18:45:01 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Sat Jun  1 18:45:02 2013] xmm0163960301/analysis//spectral/fullrun_pn_xmm0163960301_pi300-10000_pass1_cl_src6_pl.csv not found, spectral fit skipped or did not complete