[Sat Jun 1 01:20:39 2013] Detection parameters: Position = (314.3, 313.8) = 16 57 42.75 35 23 34.3 Extent = 10.9" x 10.9", rotation angle = 0 degrees Source counts = 73.6 +/- 16.6 Background counts = 85.0 Rate = 0.03 +/- 0.007 [Sat Jun 1 01:20:41 2013] Off-axis axis estimate = 1.60' [Sat Jun 1 01:27:03 2013] Using EEF radius (= 7.23 ")to estimate initial spatial extent for simple fitting [Sat Jun 1 01:27:03 2013] Initial guess for spatial extent in simple fitting = 7.23" [Sat Jun 1 01:27:03 2013] source mask rpix=1.7, npix_max = 18, mask sum = 20, frac = 1.070 [Sat Jun 1 01:27:03 2013] Giving source the simple spatial ID 46 for pass 0, mean size = 7.23" [Sat Jun 1 09:21:54 2013] fullrun_pn_xmm0163960301_pi300-10000_cl_pass0_src46.ximg exists [Sat Jun 1 09:21:54 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0163960301_pi300-10000_cl_pass0_src46.csv [Sat Jun 1 09:21:54 2013] fullrun_pn_xmm0163960301_pi300-10000_cl_pass0_src46_1.ximg exists [Sat Jun 1 09:21:54 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0163960301_pi300-10000_cl_pass0_src46.csv [Sat Jun 1 09:21:54 2013] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0163960301_pi300-10000_cl_pass0_src46_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0163960301_pi300-10000_cl_pass0_src46.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Sat Jun 1 09:21:57 2013] fullrun_pn_xmm0163960301_pi300-10000_cl_pass0_tfrozen_src46.ximg exists [Sat Jun 1 09:21:57 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0163960301_pi300-10000_cl_pass0_tfrozen_src46.csv [Sat Jun 1 09:21:57 2013] fullrun_pn_xmm0163960301_pi300-10000_cl_pass0_tfrozen_src46_1.ximg exists [Sat Jun 1 09:21:57 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0163960301_pi300-10000_cl_pass0_tfrozen_src46.csv [Sat Jun 1 09:21:57 2013] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0163960301_pi300-10000_cl_pass0_tfrozen_src46_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0163960301_pi300-10000_cl_pass0_tfrozen_src46.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Sat Jun 1 09:49:33 2013] Source 48 is offset by 5.211945 and -0.494836 pixels which is larger than 2 X fitted extent = 0.831770 x 0.831770, not incorporating fit results [Sat Jun 1 09:49:34 2013] Spatial fit model total counts = 510.416000, observed total counts = 409.000000 [Sat Jun 1 09:49:34 2013] Poor agreement between spatial fit and data for source 48 It may help to tweak spatial fit manually Not incorporating fit results [Sat Jun 1 09:49:34 2013] Spatial fit model total counts = 460.209000, observed total counts = 385.000000 [Sat Jun 1 09:49:34 2013] Poor agreement between spatial fit and data for source 48 It may help to tweak spatial fit manually Not incorporating fit results [Sat Jun 1 09:49:34 2013] Vigneting correction estimate = 1.000000 [Sat Jun 1 09:49:34 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Sat Jun 1 09:49:34 2013] Assessing source extent using major [Sat Jun 1 09:49:34 2013] Source does appear to be extended [Sat Jun 1 09:49:34 2013] Computing asymmetry using major and minor axis, asym = 1.00 [Sat Jun 1 09:49:34 2013] Source is confused with source 53 [Sat Jun 1 09:49:54 2013] Using EEF radius (= 7.23 ")to estimate initial spatial extent for simple fitting [Sat Jun 1 09:49:54 2013] Initial guess for spatial extent in simple fitting = 7.23" [Sat Jun 1 09:49:54 2013] source mask rpix=1.7, npix_max = 18, mask sum = 20, frac = 1.070 [Sat Jun 1 09:49:54 2013] Giving source the simple spatial ID 45 for pass 1, mean size = 7.23" [Sat Jun 1 15:56:51 2013] fullrun_pn_xmm0163960301_pi300-10000_cl_pass1_src45.ximg exists [Sat Jun 1 15:56:51 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0163960301_pi300-10000_cl_pass1_src45.csv [Sat Jun 1 15:56:51 2013] fullrun_pn_xmm0163960301_pi300-10000_cl_pass1_src45_1.ximg exists [Sat Jun 1 15:56:51 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0163960301_pi300-10000_cl_pass1_src45.csv [Sat Jun 1 15:56:51 2013] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0163960301_pi300-10000_cl_pass1_src45_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0163960301_pi300-10000_cl_pass1_src45.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Sat Jun 1 15:56:54 2013] fullrun_pn_xmm0163960301_pi300-10000_cl_pass1_tfrozen_src45.ximg exists [Sat Jun 1 15:56:54 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0163960301_pi300-10000_cl_pass1_tfrozen_src45.csv [Sat Jun 1 15:56:54 2013] fullrun_pn_xmm0163960301_pi300-10000_cl_pass1_tfrozen_src45_1.ximg exists [Sat Jun 1 15:56:54 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0163960301_pi300-10000_cl_pass1_tfrozen_src45.csv [Sat Jun 1 15:56:54 2013] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0163960301_pi300-10000_cl_pass1_tfrozen_src45_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0163960301_pi300-10000_cl_pass1_tfrozen_src45.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Sat Jun 1 16:23:17 2013] Source 48 is offset by 4.863991 and -0.391006 pixels which is larger than 2 X fitted extent = 0.831048 x 0.831048, not incorporating fit results [Sat Jun 1 16:23:17 2013] Spatial fit model total counts = 513.028000, observed total counts = 409.000000 [Sat Jun 1 16:23:17 2013] Poor agreement between spatial fit and data for source 48 It may help to tweak spatial fit manually Not incorporating fit results [Sat Jun 1 16:23:17 2013] Vigneting correction estimate = 1.000000 [Sat Jun 1 16:23:17 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Sat Jun 1 16:23:17 2013] Assessing source extent using major [Sat Jun 1 16:23:17 2013] Source does appear to be extended [Sat Jun 1 16:23:17 2013] Computing asymmetry using major and minor axis, asym = 1.00 [Sat Jun 1 16:23:39 2013] XMMSAS src. selection expression = ellipse(27299.029236, 27252.183899, 652.500000, 652.500000, 0.000000, X, Y) [Sat Jun 1 16:23:39 2013] Writing source region out to fullrun_pn_xmm0163960301_pi300-10000_pass1_cl_src48_src.reg [Sat Jun 1 16:23:39 2013] Extracting stamp from image fullrun_pn_xmm0163960301_pi300-10000_cl_sm2.00.img.gz, (277, 276) - (352, 351) [Sat Jun 1 16:23:39 2013] XMMSAS bgd. selection expression = annulus(27299.029236, 27252.183899, 1087.500000, 2175.000000, X, Y) && !ellipse(26907.120361, 29749.653137, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26498.431702, 29605.668243, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26269.002655, 29125.126526, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26704.111511, 28404.655121, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26681.968567, 27975.323608, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28162.497864, 27003.094360, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27456.737976, 26705.348755, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29631.968964, 26206.665222, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30184.265503, 25874.574158, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27827.141113, 26030.687225, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29983.871857, 25255.445221, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28130.597687, 25356.155792, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29545.892914, 25442.138916, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28082.562897, 24658.844208, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28638.212738, 24668.277527, 870.000000, 870.000000, 0.000000, X, Y) [Sat Jun 1 16:23:39 2013] Writing fullrun_pn_xmm0163960301_pi300-10000_pass1_cl_src48.gif [Sat Jun 1 16:54:41 2013] Mean detx,y = (-2852.97, 2321.43) [Sat Jun 1 16:54:45 2013] Setting backscal keywords in source and bgd. spectrum [Sat Jun 1 16:55:07 2013] Binned source spectrum to 10 counts/bin [Sat Jun 1 16:55:08 2013] Setting source spectrum file to fullrun_pn_xmm0163960301_pi300-10000_pass1_cl_src48_src_b10.pi.gz [Sat Jun 1 16:55:08 2013] Setting bgd. spectrum file to fullrun_pn_xmm0163960301_pi300-10000_pass1_cl_src48_bgd.pi.gz [Sat Jun 1 17:23:59 2013] Not generating rmf since there are only 73 counts [Sat Jun 1 17:23:59 2013] rmf not generated due to insufficient counts [Sat Jun 1 18:44:41 2013] Updating aperture counts using extracted products [Sat Jun 1 18:44:41 2013] Total counts from fullrun_pn_xmm0163960301_pi300-10000_pass1_cl_src48_src_b10.pi.gz = 307.00 [Sat Jun 1 18:44:42 2013] Total counts from fullrun_pn_xmm0163960301_pi300-10000_pass1_cl_src48_bgd.pi.gz = 777.00 [Sat Jun 1 18:44:42 2013] Got source and background scale factors 1215942.000000, 5331764.000000 [Sat Jun 1 18:44:42 2013] User source parameters: Position = (314.3, 313.8) = 16 57 42.75 35 23 34.3 Extent = 10.9" x 10.9", rotation angle = 0 Source aperture counts = 129.8 +/- 18.5 Background aperture counts = 177.2 Rate = 0.3 +/- 0.04 [Sat Jun 1 18:44:42 2013] Updating counts from extracted products [Sat Jun 1 18:44:42 2013] Set source signif. to 129.80/13.31 = 9.75 [Sat Jun 1 18:44:51 2013] Calculating source flux in energy range 0.30-8.00 [Sat Jun 1 18:44:51 2013] Using photon index=1.80, rate=0.269, arf fullrun_pn_xmm0163960301_pi300-10000_pass1_cl_src48.arf [Sat Jun 1 18:44:51 2013] Assuming count rate is from the 0.30-10.00 bandpass [Sat Jun 1 18:44:51 2013] Updating source flux to 9.2e-13 [Sat Jun 1 18:45:01 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting [Sat Jun 1 18:45:02 2013] xmm0163960301/analysis//spectral/fullrun_pn_xmm0163960301_pi300-10000_pass1_cl_src48_pl.csv not found, spectral fit skipped or did not complete