[Sat Jun 1 01:20:36 2013] Detection parameters: Position = (275.7, 426.9) = 16 57 56.50 35 31 48.4 Extent = 10.9" x 10.9", rotation angle = 0 degrees Source counts = 98.7 +/- 17.6 Background counts = 70.4 Rate = 0.03 +/- 0.005 [Sat Jun 1 01:20:41 2013] Off-axis axis estimate = 9.46' [Sat Jun 1 01:27:03 2013] Using EEF radius (= 11.16 ")to estimate initial spatial extent for simple fitting [Sat Jun 1 01:27:03 2013] Initial guess for spatial extent in simple fitting = 11.16" [Sat Jun 1 01:27:03 2013] source mask rpix=2.6, npix_max = 37, mask sum = 36, frac = 0.958 [Sat Jun 1 01:27:03 2013] Giving source the simple spatial ID 3 for pass 0, mean size = 11.16" [Sat Jun 1 09:21:53 2013] fullrun_pn_xmm0163960301_pi300-10000_cl_pass0_src3.ximg exists [Sat Jun 1 09:21:53 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0163960301_pi300-10000_cl_pass0_src3.csv [Sat Jun 1 09:21:53 2013] fullrun_pn_xmm0163960301_pi300-10000_cl_pass0_src3_1.ximg exists [Sat Jun 1 09:21:53 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0163960301_pi300-10000_cl_pass0_src3.csv [Sat Jun 1 09:21:53 2013] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0163960301_pi300-10000_cl_pass0_src3_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0163960301_pi300-10000_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Sat Jun 1 09:21:55 2013] fullrun_pn_xmm0163960301_pi300-10000_cl_pass0_tfrozen_src3.ximg exists [Sat Jun 1 09:21:55 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0163960301_pi300-10000_cl_pass0_tfrozen_src3.csv [Sat Jun 1 09:21:55 2013] fullrun_pn_xmm0163960301_pi300-10000_cl_pass0_tfrozen_src3_1.ximg exists [Sat Jun 1 09:21:55 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0163960301_pi300-10000_cl_pass0_tfrozen_src3.csv [Sat Jun 1 09:21:55 2013] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0163960301_pi300-10000_cl_pass0_tfrozen_src3_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0163960301_pi300-10000_cl_pass0_tfrozen_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Sat Jun 1 09:49:33 2013] Spatial fit model total counts = 713.327000, observed total counts = 574.000000 [Sat Jun 1 09:49:33 2013] Poor agreement between spatial fit and data for source 3 It may help to tweak spatial fit manually Not incorporating fit results [Sat Jun 1 09:49:33 2013] Source 3 is offset by 0.891645 and 9.597966 pixels which is larger than 2 X fitted extent = 1.215563 x 1.215563, not incorporating fit results [Sat Jun 1 09:49:33 2013] Source 3 is offset by 0.782933 and 8.834863 pixels which is larger than 2 X fitted extent = 1.200906 x 1.200906, not incorporating fit results [Sat Jun 1 09:49:34 2013] Vigneting correction estimate = 1.000000 [Sat Jun 1 09:49:34 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Sat Jun 1 09:49:34 2013] Assessing source extent using major [Sat Jun 1 09:49:34 2013] Source does appear to be extended [Sat Jun 1 09:49:34 2013] Computing asymmetry using major and minor axis, asym = 1.00 [Sat Jun 1 09:49:54 2013] Using EEF radius (= 11.16 ")to estimate initial spatial extent for simple fitting [Sat Jun 1 09:49:54 2013] Initial guess for spatial extent in simple fitting = 11.16" [Sat Jun 1 09:49:54 2013] source mask rpix=2.6, npix_max = 37, mask sum = 36, frac = 0.958 [Sat Jun 1 09:49:54 2013] Giving source the simple spatial ID 3 for pass 1, mean size = 11.16" [Sat Jun 1 15:56:50 2013] fullrun_pn_xmm0163960301_pi300-10000_cl_pass1_src3.ximg exists [Sat Jun 1 15:56:50 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0163960301_pi300-10000_cl_pass1_src3.csv [Sat Jun 1 15:56:50 2013] fullrun_pn_xmm0163960301_pi300-10000_cl_pass1_src3_1.ximg exists [Sat Jun 1 15:56:50 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0163960301_pi300-10000_cl_pass1_src3.csv [Sat Jun 1 15:56:50 2013] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0163960301_pi300-10000_cl_pass1_src3_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0163960301_pi300-10000_cl_pass1_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Sat Jun 1 15:56:52 2013] fullrun_pn_xmm0163960301_pi300-10000_cl_pass1_tfrozen_src3.ximg exists [Sat Jun 1 15:56:52 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0163960301_pi300-10000_cl_pass1_tfrozen_src3.csv [Sat Jun 1 15:56:52 2013] fullrun_pn_xmm0163960301_pi300-10000_cl_pass1_tfrozen_src3_1.ximg exists [Sat Jun 1 15:56:52 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0163960301_pi300-10000_cl_pass1_tfrozen_src3.csv [Sat Jun 1 15:56:52 2013] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0163960301_pi300-10000_cl_pass1_tfrozen_src3_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0163960301_pi300-10000_cl_pass1_tfrozen_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Sat Jun 1 16:23:17 2013] Spatial fit model total counts = 713.123000, observed total counts = 574.000000 [Sat Jun 1 16:23:17 2013] Poor agreement between spatial fit and data for source 3 It may help to tweak spatial fit manually Not incorporating fit results [Sat Jun 1 16:23:17 2013] Source 3 is offset by 0.903438 and 9.566426 pixels which is larger than 2 X fitted extent = 1.215563 x 1.215563, not incorporating fit results [Sat Jun 1 16:23:17 2013] Vigneting correction estimate = 1.000000 [Sat Jun 1 16:23:17 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Sat Jun 1 16:23:17 2013] Assessing source extent using major [Sat Jun 1 16:23:17 2013] Source does appear to be extended [Sat Jun 1 16:23:17 2013] Computing asymmetry using major and minor axis, asym = 1.00 [Sat Jun 1 16:23:37 2013] XMMSAS src. selection expression = ellipse(23940.579132, 37095.089050, 652.500000, 652.500000, 0.000000, X, Y) [Sat Jun 1 16:23:37 2013] Writing source region out to fullrun_pn_xmm0163960301_pi300-10000_pass1_cl_src3_src.reg [Sat Jun 1 16:23:37 2013] Extracting stamp from image fullrun_pn_xmm0163960301_pi300-10000_cl_sm2.00.img.gz, (238, 389) - (313, 464) [Sat Jun 1 16:23:37 2013] XMMSAS bgd. selection expression = annulus(23940.579132, 37095.089050, 1087.500000, 2175.000000, X, Y) && !ellipse(23678.156036, 38620.860046, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23483.430878, 38235.825043, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24672.836212, 35789.961609, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24393.304108, 35441.013763, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24198.963928, 35035.203156, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24457.770874, 34387.423798, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25265.550262, 34237.183655, 870.000000, 870.000000, 0.000000, X, Y) [Sat Jun 1 16:23:37 2013] Writing fullrun_pn_xmm0163960301_pi300-10000_pass1_cl_src3.gif [Sat Jun 1 16:25:30 2013] Mean detx,y = (-2873.11, 12679.14) [Sat Jun 1 16:25:34 2013] Setting backscal keywords in source and bgd. spectrum [Sat Jun 1 16:26:02 2013] Binned source spectrum to 10 counts/bin [Sat Jun 1 16:26:03 2013] Setting source spectrum file to fullrun_pn_xmm0163960301_pi300-10000_pass1_cl_src3_src_b10.pi.gz [Sat Jun 1 16:26:03 2013] Setting bgd. spectrum file to fullrun_pn_xmm0163960301_pi300-10000_pass1_cl_src3_bgd.pi.gz [Sat Jun 1 17:12:29 2013] Not generating rmf since there are only 98 counts [Sat Jun 1 17:12:29 2013] rmf not generated due to insufficient counts [Sat Jun 1 18:44:24 2013] Updating aperture counts using extracted products [Sat Jun 1 18:44:24 2013] Total counts from fullrun_pn_xmm0163960301_pi300-10000_pass1_cl_src3_src_b10.pi.gz = 295.00 [Sat Jun 1 18:44:25 2013] Total counts from fullrun_pn_xmm0163960301_pi300-10000_pass1_cl_src3_bgd.pi.gz = 865.00 [Sat Jun 1 18:44:25 2013] Got source and background scale factors 1202872.000000, 6266369.000000 [Sat Jun 1 18:44:25 2013] User source parameters: Position = (275.7, 426.9) = 16 57 56.50 35 31 48.4 Extent = 10.9" x 10.9", rotation angle = 0 Source aperture counts = 129.0 +/- 18.2 Background aperture counts = 166.0 Rate = 0.3 +/- 0.04 [Sat Jun 1 18:44:25 2013] Updating counts from extracted products [Sat Jun 1 18:44:25 2013] Set source signif. to 128.96/12.89 = 10.01 [Sat Jun 1 18:44:49 2013] Calculating source flux in energy range 0.30-8.00 [Sat Jun 1 18:44:49 2013] Using photon index=1.80, rate=0.267, arf fullrun_pn_xmm0163960301_pi300-10000_pass1_cl_src3.arf [Sat Jun 1 18:44:49 2013] Assuming count rate is from the 0.30-10.00 bandpass [Sat Jun 1 18:44:49 2013] Updating source flux to 1.7e-12 [Sat Jun 1 18:45:01 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting [Sat Jun 1 18:45:02 2013] xmm0163960301/analysis//spectral/fullrun_pn_xmm0163960301_pi300-10000_pass1_cl_src3_pl.csv not found, spectral fit skipped or did not complete