[Sat Jun 1 01:20:37 2013] Detection parameters: Position = (480.5, 357.1) = 16 56 43.59 35 26 39.4 Extent = 10.9" x 10.9", rotation angle = 0 degrees Source counts = 108.0 +/- 19.0 Background counts = 64.4 Rate = 0.03 +/- 0.006 [Sat Jun 1 01:20:41 2013] Off-axis axis estimate = 13.87' [Sat Jun 1 01:27:03 2013] Using EEF radius (= 13.36 ")to estimate initial spatial extent for simple fitting [Sat Jun 1 01:27:03 2013] Initial guess for spatial extent in simple fitting = 13.36" [Sat Jun 1 01:27:03 2013] source mask rpix=3.1, npix_max = 51, mask sum = 49, frac = 0.960 [Sat Jun 1 01:27:03 2013] Giving source the simple spatial ID 20 for pass 0, mean size = 13.36" [Sat Jun 1 09:21:53 2013] fullrun_pn_xmm0163960301_pi300-10000_cl_pass0_src20.ximg exists [Sat Jun 1 09:21:53 2013] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0163960301_pi300-10000_cl_pass0_src20.csv [Sat Jun 1 09:21:53 2013] fullrun_pn_xmm0163960301_pi300-10000_cl_pass0_src20_1.ximg exists [Sat Jun 1 09:21:53 2013] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0163960301_pi300-10000_cl_pass0_src20.csv [Sat Jun 1 09:21:53 2013] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0163960301_pi300-10000_cl_pass0_src20_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0163960301_pi300-10000_cl_pass0_src20.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Sat Jun 1 09:21:56 2013] fullrun_pn_xmm0163960301_pi300-10000_cl_pass0_tfrozen_src20.ximg exists [Sat Jun 1 09:21:56 2013] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0163960301_pi300-10000_cl_pass0_tfrozen_src20.csv [Sat Jun 1 09:21:56 2013] fullrun_pn_xmm0163960301_pi300-10000_cl_pass0_tfrozen_src20_1.ximg exists [Sat Jun 1 09:21:56 2013] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0163960301_pi300-10000_cl_pass0_tfrozen_src20.csv [Sat Jun 1 09:21:56 2013] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0163960301_pi300-10000_cl_pass0_tfrozen_src20_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0163960301_pi300-10000_cl_pass0_tfrozen_src20.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Sat Jun 1 09:49:33 2013] Warning, spatial fit 20 centroid is now closest to src. 24 [Sat Jun 1 09:49:33 2013] Source 21 is offset by 7.368380 and 0.255728 pixels which is larger than 2 X fitted extent = 1.508216 x 1.508216, not incorporating fit results [Sat Jun 1 09:49:34 2013] Vigneting correction estimate = 1.000000 [Sat Jun 1 09:49:34 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Sat Jun 1 09:49:34 2013] Assessing source extent using major [Sat Jun 1 09:49:34 2013] Source does appear to be extended [Sat Jun 1 09:49:34 2013] Computing asymmetry using major and minor axis, asym = 1.00 [Sat Jun 1 09:49:34 2013] Source is confused with source 19 [Sat Jun 1 09:49:54 2013] Using EEF radius (= 13.36 ")to estimate initial spatial extent for simple fitting [Sat Jun 1 09:49:54 2013] Initial guess for spatial extent in simple fitting = 13.36" [Sat Jun 1 09:49:54 2013] source mask rpix=3.1, npix_max = 51, mask sum = 49, frac = 0.960 [Sat Jun 1 09:49:54 2013] Giving source the simple spatial ID 19 for pass 1, mean size = 13.36" [Sat Jun 1 15:56:50 2013] fullrun_pn_xmm0163960301_pi300-10000_cl_pass1_src19.ximg exists [Sat Jun 1 15:56:50 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0163960301_pi300-10000_cl_pass1_src19.csv [Sat Jun 1 15:56:50 2013] fullrun_pn_xmm0163960301_pi300-10000_cl_pass1_src19_1.ximg exists [Sat Jun 1 15:56:50 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0163960301_pi300-10000_cl_pass1_src19.csv [Sat Jun 1 15:56:50 2013] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0163960301_pi300-10000_cl_pass1_src19_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0163960301_pi300-10000_cl_pass1_src19.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Sat Jun 1 15:56:53 2013] fullrun_pn_xmm0163960301_pi300-10000_cl_pass1_tfrozen_src19.ximg exists [Sat Jun 1 15:56:53 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0163960301_pi300-10000_cl_pass1_tfrozen_src19.csv [Sat Jun 1 15:56:53 2013] fullrun_pn_xmm0163960301_pi300-10000_cl_pass1_tfrozen_src19_1.ximg exists [Sat Jun 1 15:56:53 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0163960301_pi300-10000_cl_pass1_tfrozen_src19.csv [Sat Jun 1 15:56:53 2013] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0163960301_pi300-10000_cl_pass1_tfrozen_src19_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0163960301_pi300-10000_cl_pass1_tfrozen_src19.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Sat Jun 1 16:23:17 2013] Warning, spatial fit 19 centroid is now closest to src. 24 [Sat Jun 1 16:23:17 2013] Vigneting correction estimate = 1.000000 [Sat Jun 1 16:23:17 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Sat Jun 1 16:23:17 2013] Assessing source extent using major [Sat Jun 1 16:23:17 2013] Source does appear to be extended [Sat Jun 1 16:23:17 2013] Computing asymmetry using major and minor axis, asym = 1.00 [Sat Jun 1 16:23:37 2013] XMMSAS src. selection expression = ellipse(41756.739044, 31017.270325, 652.500000, 652.500000, 0.000000, X, Y) [Sat Jun 1 16:23:37 2013] Writing source region out to fullrun_pn_xmm0163960301_pi300-10000_pass1_cl_src21_src.reg [Sat Jun 1 16:23:37 2013] Extracting stamp from image fullrun_pn_xmm0163960301_pi300-10000_cl_sm2.00.img.gz, (443, 320) - (518, 395) [Sat Jun 1 16:23:37 2013] XMMSAS bgd. selection expression = annulus(41756.739044, 31017.270325, 1087.500000, 2175.000000, X, Y) && !ellipse(41864.846527, 31889.054504, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(42205.431030, 31192.661560, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(41983.940521, 30147.477417, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(40758.317932, 29970.567505, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(42766.499786, 29608.742767, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(41906.713684, 29108.487457, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(41468.248871, 29265.991760, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(39167.766876, 28749.208893, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(40718.620000, 28734.770980, 2031.048058, 609.008018, 153.771000, X, Y) && !ellipse(39820.004028, 28500.562744, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(39380.201080, 28319.497711, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(38640.192000, 28048.459400, 1910.840055, 519.716015, 331.089200, X, Y) [Sat Jun 1 16:23:37 2013] Writing fullrun_pn_xmm0163960301_pi300-10000_pass1_cl_src21.gif [Sat Jun 1 16:36:54 2013] Mean detx,y = (-17701.90, 1089.98) [Sat Jun 1 16:36:57 2013] Setting backscal keywords in source and bgd. spectrum [Sat Jun 1 16:37:17 2013] Binned source spectrum to 10 counts/bin [Sat Jun 1 16:37:18 2013] Setting source spectrum file to fullrun_pn_xmm0163960301_pi300-10000_pass1_cl_src21_src_b10.pi.gz [Sat Jun 1 16:37:18 2013] Setting bgd. spectrum file to fullrun_pn_xmm0163960301_pi300-10000_pass1_cl_src21_bgd.pi.gz [Sat Jun 1 17:16:55 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done [Sat Jun 1 17:16:55 2013] rmf not generated due to insufficient counts [Sat Jun 1 18:44:31 2013] Updating aperture counts using extracted products [Sat Jun 1 18:44:31 2013] Total counts from fullrun_pn_xmm0163960301_pi300-10000_pass1_cl_src21_src_b10.pi.gz = 262.00 [Sat Jun 1 18:44:31 2013] Total counts from fullrun_pn_xmm0163960301_pi300-10000_pass1_cl_src21_bgd.pi.gz = 596.00 [Sat Jun 1 18:44:31 2013] Got source and background scale factors 1340128.000000, 2911040.000000 [Sat Jun 1 18:44:31 2013] User source parameters: Position = (480.5, 357.1) = 16 56 43.59 35 26 39.4 Extent = 10.9" x 10.9", rotation angle = 0 Source aperture counts = -12.4 +/- 17.2 Background aperture counts = 274.4 Rate = -0.03 +/- 0.04 [Sat Jun 1 18:44:31 2013] Updating counts from extracted products [Sat Jun 1 18:44:31 2013] Set source signif. to -12.37/16.56 = -0.75 [Sat Jun 1 18:44:50 2013] Calculating source flux in energy range 0.30-8.00 [Sat Jun 1 18:44:50 2013] Using photon index=1.80, rate=-0.0256, arf fullrun_pn_xmm0163960301_pi300-10000_pass1_cl_src21.arf [Sat Jun 1 18:44:50 2013] Assuming count rate is from the 0.30-10.00 bandpass [Sat Jun 1 18:44:50 2013] Updated flux is not positive, keeping original flux [Sat Jun 1 18:45:01 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting [Sat Jun 1 18:45:02 2013] xmm0163960301/analysis//spectral/fullrun_pn_xmm0163960301_pi300-10000_pass1_cl_src21_pl.csv not found, spectral fit skipped or did not complete