[Sat Jun 1 01:20:37 2013] Detection parameters: Position = (485.7, 359.1) = 16 56 41.75 35 26 51.1 Extent = 10.9" x 10.9", rotation angle = 0 degrees Source counts = 80.0 +/- 14.1 Background counts = 56.7 Rate = 0.02 +/- 0.004 [Sat Jun 1 01:20:41 2013] Off-axis axis estimate = 14.27' [Sat Jun 1 01:27:03 2013] Using EEF radius (= 13.56 ")to estimate initial spatial extent for simple fitting [Sat Jun 1 01:27:03 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass [Sat Jun 1 01:27:03 2013] Initial guess for spatial extent in simple fitting = 13.56" [Sat Jun 1 01:27:03 2013] source mask rpix=3.1, npix_max = 52, mask sum = 41, frac = 0.783 [Sat Jun 1 01:27:03 2013] Giving source the simple spatial ID 18 for pass 0, mean size = 13.56" [Sat Jun 1 09:21:53 2013] fullrun_pn_xmm0163960301_pi300-10000_cl_pass0_src18.ximg exists [Sat Jun 1 09:21:53 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0163960301_pi300-10000_cl_pass0_src18.csv [Sat Jun 1 09:21:53 2013] fullrun_pn_xmm0163960301_pi300-10000_cl_pass0_src18_1.ximg exists [Sat Jun 1 09:21:53 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0163960301_pi300-10000_cl_pass0_src18.csv [Sat Jun 1 09:21:53 2013] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0163960301_pi300-10000_cl_pass0_src18_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0163960301_pi300-10000_cl_pass0_src18.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Sat Jun 1 09:21:56 2013] fullrun_pn_xmm0163960301_pi300-10000_cl_pass0_tfrozen_src18.ximg exists [Sat Jun 1 09:21:56 2013] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0163960301_pi300-10000_cl_pass0_tfrozen_src18.csv [Sat Jun 1 09:21:56 2013] fullrun_pn_xmm0163960301_pi300-10000_cl_pass0_tfrozen_src18_1.ximg exists [Sat Jun 1 09:21:56 2013] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0163960301_pi300-10000_cl_pass0_tfrozen_src18.csv [Sat Jun 1 09:21:56 2013] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0163960301_pi300-10000_cl_pass0_tfrozen_src18_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0163960301_pi300-10000_cl_pass0_tfrozen_src18.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Sat Jun 1 09:49:33 2013] Warning, spatial fit 18 centroid is now closest to src. 18 [Sat Jun 1 09:49:34 2013] Vigneting correction estimate = 1.000000 [Sat Jun 1 09:49:34 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Sat Jun 1 09:49:34 2013] Assessing source extent using major [Sat Jun 1 09:49:34 2013] Source does appear to be extended [Sat Jun 1 09:49:34 2013] Computing asymmetry using major and minor axis, asym = 1.00 [Sat Jun 1 09:49:34 2013] Source is confused with source 21 [Sat Jun 1 09:49:54 2013] Using EEF radius (= 13.56 ")to estimate initial spatial extent for simple fitting [Sat Jun 1 09:49:54 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass [Sat Jun 1 09:49:54 2013] Initial guess for spatial extent in simple fitting = 13.56" [Sat Jun 1 09:49:54 2013] source mask rpix=3.1, npix_max = 52, mask sum = 41, frac = 0.783 [Sat Jun 1 09:49:54 2013] Giving source the simple spatial ID 17 for pass 1, mean size = 13.56" [Sat Jun 1 15:56:50 2013] fullrun_pn_xmm0163960301_pi300-10000_cl_pass1_src17.ximg exists [Sat Jun 1 15:56:50 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0163960301_pi300-10000_cl_pass1_src17.csv [Sat Jun 1 15:56:50 2013] fullrun_pn_xmm0163960301_pi300-10000_cl_pass1_src17_1.ximg exists [Sat Jun 1 15:56:50 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0163960301_pi300-10000_cl_pass1_src17.csv [Sat Jun 1 15:56:50 2013] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0163960301_pi300-10000_cl_pass1_src17_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0163960301_pi300-10000_cl_pass1_src17.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Sat Jun 1 15:56:53 2013] fullrun_pn_xmm0163960301_pi300-10000_cl_pass1_tfrozen_src17.ximg exists [Sat Jun 1 15:56:53 2013] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0163960301_pi300-10000_cl_pass1_tfrozen_src17.csv [Sat Jun 1 15:56:53 2013] fullrun_pn_xmm0163960301_pi300-10000_cl_pass1_tfrozen_src17_1.ximg exists [Sat Jun 1 15:56:53 2013] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0163960301_pi300-10000_cl_pass1_tfrozen_src17.csv [Sat Jun 1 15:56:53 2013] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0163960301_pi300-10000_cl_pass1_tfrozen_src17_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0163960301_pi300-10000_cl_pass1_tfrozen_src17.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Sat Jun 1 16:23:17 2013] Warning, spatial fit 17 centroid is now closest to src. 18 [Sat Jun 1 16:23:17 2013] Vigneting correction estimate = 1.000000 [Sat Jun 1 16:23:17 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Sat Jun 1 16:23:17 2013] Assessing source extent using major [Sat Jun 1 16:23:17 2013] Source does appear to be extended [Sat Jun 1 16:23:17 2013] Computing asymmetry using major and minor axis, asym = 1.00 [Sat Jun 1 16:23:37 2013] XMMSAS src. selection expression = ellipse(42205.431030, 31192.661560, 652.500000, 652.500000, 0.000000, X, Y) [Sat Jun 1 16:23:37 2013] Writing source region out to fullrun_pn_xmm0163960301_pi300-10000_pass1_cl_src19_src.reg [Sat Jun 1 16:23:37 2013] Extracting stamp from image fullrun_pn_xmm0163960301_pi300-10000_cl_sm2.00.img.gz, (448, 322) - (523, 397) [Sat Jun 1 16:23:37 2013] XMMSAS bgd. selection expression = annulus(42205.431030, 31192.661560, 1087.500000, 2175.000000, X, Y) && !ellipse(41864.846527, 31889.054504, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(41756.739044, 31017.270325, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(41983.940521, 30147.477417, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(40758.317932, 29970.567505, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(42766.499786, 29608.742767, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(41906.713684, 29108.487457, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(41468.248871, 29265.991760, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(39167.766876, 28749.208893, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(40718.620000, 28734.770980, 2031.048058, 609.008018, 153.771000, X, Y) && !ellipse(39820.004028, 28500.562744, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(39380.201080, 28319.497711, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(38640.192000, 28048.459400, 1910.840055, 519.716015, 331.089200, X, Y) [Sat Jun 1 16:23:37 2013] Writing fullrun_pn_xmm0163960301_pi300-10000_pass1_cl_src19.gif [Sat Jun 1 16:35:36 2013] Mean detx,y = (-17910.38, 1092.24) [Sat Jun 1 16:35:40 2013] Setting backscal keywords in source and bgd. spectrum [Sat Jun 1 16:36:08 2013] Binned source spectrum to 10 counts/bin [Sat Jun 1 16:36:09 2013] Setting source spectrum file to fullrun_pn_xmm0163960301_pi300-10000_pass1_cl_src19_src_b10.pi.gz [Sat Jun 1 16:36:09 2013] Setting bgd. spectrum file to fullrun_pn_xmm0163960301_pi300-10000_pass1_cl_src19_bgd.pi.gz [Sat Jun 1 17:16:22 2013] Not generating rmf since there are only 79 counts [Sat Jun 1 17:16:22 2013] rmf not generated due to insufficient counts [Sat Jun 1 18:44:30 2013] Updating aperture counts using extracted products [Sat Jun 1 18:44:30 2013] Total counts from fullrun_pn_xmm0163960301_pi300-10000_pass1_cl_src19_src_b10.pi.gz = 170.00 [Sat Jun 1 18:44:30 2013] Total counts from fullrun_pn_xmm0163960301_pi300-10000_pass1_cl_src19_bgd.pi.gz = 416.00 [Sat Jun 1 18:44:30 2013] Got source and background scale factors 872236.000000, 2072416.000000 [Sat Jun 1 18:44:30 2013] User source parameters: Position = (485.7, 359.1) = 16 56 41.75 35 26 51.1 Extent = 10.9" x 10.9", rotation angle = 0 Source aperture counts = -5.1 +/- 14.1 Background aperture counts = 175.1 Rate = -0.01 +/- 0.03 [Sat Jun 1 18:44:30 2013] Updating counts from extracted products [Sat Jun 1 18:44:30 2013] Set source signif. to -5.09/13.23 = -0.38 [Sat Jun 1 18:44:50 2013] Calculating source flux in energy range 0.30-8.00 [Sat Jun 1 18:44:50 2013] Using photon index=1.80, rate=-0.0105, arf fullrun_pn_xmm0163960301_pi300-10000_pass1_cl_src19.arf [Sat Jun 1 18:44:50 2013] Assuming count rate is from the 0.30-10.00 bandpass [Sat Jun 1 18:44:50 2013] Updated flux is not positive, keeping original flux [Sat Jun 1 18:45:01 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting [Sat Jun 1 18:45:02 2013] xmm0163960301/analysis//spectral/fullrun_pn_xmm0163960301_pi300-10000_pass1_cl_src19_pl.csv not found, spectral fit skipped or did not complete