[Thu Jun 13 23:30:33 2013] Detection parameters:
  Position = (276.4, 319.9) = 11 4 32.72 38 15 40.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 5426.4 +/- 103.9
  Background counts = 1025.2
  Rate = 0.4 +/- 0.007

[Thu Jun 13 23:30:33 2013] Off-axis axis estimate = 2.23'
[Thu Jun 13 23:44:19 2013] Using EEF radius (= 7.54 ")to estimate initial spatial extent for simple fitting
[Thu Jun 13 23:44:19 2013] Initial guess for spatial extent in simple fitting = 7.54"
[Thu Jun 13 23:44:19 2013] source mask rpix=1.7, npix_max = 19, mask sum = 20, frac = 1.002
[Thu Jun 13 23:44:19 2013] Giving source the simple spatial ID 1 for pass 0, mean size = 7.54"
[Fri Jun 14 00:35:18 2013] fullrun_pn_xmm0162960101_pi300-10000_cl_pass0_src1.ximg exists
[Fri Jun 14 00:35:18 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0162960101_pi300-10000_cl_pass0_src1.csv
[Fri Jun 14 00:35:18 2013] fullrun_pn_xmm0162960101_pi300-10000_cl_pass0_src1_1.ximg exists
[Fri Jun 14 00:35:18 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0162960101_pi300-10000_cl_pass0_src1.csv
[Fri Jun 14 00:35:18 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0162960101_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0162960101_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 14 00:35:18 2013] fullrun_pn_xmm0162960101_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Fri Jun 14 00:35:18 2013] fullrun_pn_xmm0162960101_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Fri Jun 14 00:35:18 2013] Fit fullrun_pn_xmm0162960101_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Fri Jun 14 18:10:31 2013] Spatial fit model total counts = 19593.900000, observed total counts = 19293.000000
[Fri Jun 14 18:10:31 2013] Offset between fit and detection position for source 1 = 0.261542 pixels
[Fri Jun 14 18:10:31 2013] 18501.410000 total counts/ 11732.100000 bgd. counts: snr = 62.496619
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.261542 pixels
  Position = (276.2, 319.7) = 11 4 32.80 38 15 39.1
  Extent = 9.9 (9.5-10.4)", rotation angle = 0
  Source counts = 6769.3 +/- 136.0
  Background counts = 11732.1
  Rate = 0.3 +/- 0.006
[Fri Jun 14 18:10:31 2013] Vigneting correction estimate = 1.000000
[Fri Jun 14 18:10:31 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun 14 18:10:31 2013] Assessing source extent using major axis lower bound
[Fri Jun 14 18:10:31 2013] Source does appear to be extended
[Fri Jun 14 18:10:31 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun 14 18:10:31 2013] Source is confused with source 2
[Fri Jun 14 18:10:46 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Jun 14 18:10:46 2013] Initial guess for spatial extent in simple fitting = 9.89"
[Fri Jun 14 18:10:46 2013] source mask rpix=2.3, npix_max = 30, mask sum = 36, frac = 1.170
[Fri Jun 14 18:10:46 2013] Giving source the simple spatial ID 1 for pass 1, mean size = 9.89"
[Sat Jun 15 04:34:58 2013] fullrun_pn_xmm0162960101_pi300-10000_cl_pass1_src1.ximg exists
[Sat Jun 15 04:34:58 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0162960101_pi300-10000_cl_pass1_src1.csv
[Sat Jun 15 04:34:58 2013] fullrun_pn_xmm0162960101_pi300-10000_cl_pass1_src1_1.ximg exists
[Sat Jun 15 04:34:58 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0162960101_pi300-10000_cl_pass1_src1.csv
[Sat Jun 15 04:34:58 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0162960101_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0162960101_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 15 04:34:58 2013] fullrun_pn_xmm0162960101_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Sat Jun 15 04:34:58 2013] fullrun_pn_xmm0162960101_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Sat Jun 15 04:34:58 2013] Fit fullrun_pn_xmm0162960101_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Sat Jun 15 09:54:30 2013] Warning, spatial fit 1 centroid is now closest to src. 3
[Sat Jun 15 09:54:30 2013] Vigneting correction estimate = 1.000000
[Sat Jun 15 09:54:30 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun 15 09:54:30 2013] Assessing source extent using major axis lower bound
[Sat Jun 15 09:54:30 2013] Source does appear to be extended
[Sat Jun 15 09:54:30 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun 15 09:54:37 2013] Counts = 6769.310000, rescaling region sizes by 2.000000
[Sat Jun 15 09:54:37 2013] XMMSAS src. selection expression = ellipse(23982.247560, 27769.201000, 1186.870834, 1186.870834, 0.000000, X, Y)
[Sat Jun 15 09:54:37 2013] Writing source region out to fullrun_pn_xmm0162960101_pi300-10000_pass1_cl_src1_src.reg
[Sat Jun 15 09:54:37 2013] Extracting stamp from image fullrun_pn_xmm0162960101_pi300-10000_cl_sm2.00.img.gz, (208, 252) - (344, 388)
[Sat Jun 15 09:54:37 2013] XMMSAS bgd. selection expression = annulus(23982.247560, 27769.201000, 3956.236114, 7912.472228, X, Y) && !ellipse(24128.429400, 27351.300000, 1161.280033, 394.841611, 69.347200, X, Y) && !ellipse(24113.562800, 27394.292000, 1161.280033, 401.043212, 68.981000, X, Y) && !ellipse(21384.571808, 26809.078094, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25151.110535, 24619.868378, 5220.000000, 5220.000000, 0.000000, X, Y) && !ellipse(25228.625600, 24182.070000, 2182.039263, 1888.108854, 134.343300, X, Y)
[Sat Jun 15 09:54:37 2013] Writing fullrun_pn_xmm0162960101_pi300-10000_pass1_cl_src1.gif
[Sat Jun 15 09:57:02 2013] Mean detx,y = (228.33, 3407.07) 
[Sat Jun 15 09:57:07 2013] Setting backscal keywords in source and bgd. spectrum
[Sat Jun 15 09:57:52 2013] Binned source spectrum to 10 counts/bin
[Sat Jun 15 09:57:52 2013] Setting source spectrum file to fullrun_pn_xmm0162960101_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Sat Jun 15 09:57:52 2013] Setting bgd. spectrum file to fullrun_pn_xmm0162960101_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Mon Jun 17 09:24:46 2013] Updating aperture counts using extracted products
[Mon Jun 17 09:24:46 2013] Total counts from fullrun_pn_xmm0162960101_pi300-10000_pass1_cl_src1_src_b10.pi.gz = 33980.00
[Mon Jun 17 09:24:46 2013] Total counts from fullrun_pn_xmm0162960101_pi300-10000_pass1_cl_src1_bgd.pi.gz = 0.00
[Mon Jun 17 09:24:46 2013] Got source and background scale factors 3306439.000000, 62794.000000
[Mon Jun 17 09:24:46 2013] User source parameters:
  Position = (276.2, 319.7) = 11 4 32.80 38 15 39.1
  Extent = 9.9 (9.5-10.4)", rotation angle = 0
  Source aperture counts = 33980.0 +/- 185.3
  Background aperture counts = 0.0
  Rate = 1 +/- 0.008

[Mon Jun 17 09:24:47 2013] Calculating source flux in energy range 0.30-8.00
[Mon Jun 17 09:24:47 2013] Using photon index=1.80, rate=0.274, arf fullrun_pn_xmm0162960101_pi300-10000_pass1_cl_src1.arf
[Mon Jun 17 09:24:47 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Jun 17 09:24:47 2013] Updating source flux to 1.2e-12
[Mon Jun 17 09:24:57 2013] Flag c found in src. 1 procflags, skipping spectral fitting
[Mon Jun 17 09:25:01 2013] xmm0162960101/analysis//spectral/fullrun_pn_xmm0162960101_pi300-10000_pass1_cl_src1_pl.csv not found, spectral fit skipped or did not complete