[Sat Dec 24 12:57:37 2011] Detection parameters:
  Position = (240.9, 284.2) = 8 50 2.32 -45 41 40.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 529.3 +/- 35.0
  Background counts = 215.2
  Rate = 0.02 +/- 0.001

[Sat Dec 24 12:57:39 2011] Off-axis axis estimate = 4.30'
[Sat Dec 24 17:00:14 2011] Using EEF radius (= 8.58 ")to estimate initial spatial extent for simple fitting
[Sat Dec 24 17:00:14 2011] Initial guess for spatial extent in simple fitting = 8.58"
[Sat Dec 24 17:00:14 2011] source mask rpix=2.0, npix_max = 24, mask sum = 25, frac = 1.023
[Sat Dec 24 17:00:14 2011] Giving source the simple spatial ID 1 for pass 0, mean size = 8.58"
[Sat Dec 24 19:41:08 2011] fullrun_mos1_xmm0162360601_pi300-10000_cl_pass0_src1.ximg exists
[Sat Dec 24 19:41:08 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0162360601_pi300-10000_cl_pass0_src1.csv
[Sat Dec 24 19:41:08 2011] fullrun_mos1_xmm0162360601_pi300-10000_cl_pass0_src1_1.ximg exists
[Sat Dec 24 19:41:08 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0162360601_pi300-10000_cl_pass0_src1.csv
[Sat Dec 24 19:41:08 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0162360601_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0162360601_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Dec 24 19:41:08 2011] fullrun_mos1_xmm0162360601_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Sat Dec 24 19:41:08 2011] fullrun_mos1_xmm0162360601_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Sat Dec 24 19:41:08 2011] Fit fullrun_mos1_xmm0162360601_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Sat Dec 24 23:26:09 2011] Source 1 is offset by -7.679556 and -4.351448 pixels which is larger than
2 X fitted extent = 0.985853 x 0.985853, not incorporating fit results
[Sat Dec 24 23:26:09 2011] Vigneting correction estimate = 1.000000
[Sat Dec 24 23:26:09 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Dec 24 23:26:09 2011] Assessing source extent using major
[Sat Dec 24 23:26:09 2011] Source does appear to be extended
[Sat Dec 24 23:26:09 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Dec 25 04:59:05 2011] Using EEF radius (= 8.58 ")to estimate initial spatial extent for simple fitting
[Sun Dec 25 04:59:05 2011] Initial guess for spatial extent in simple fitting = 8.58"
[Sun Dec 25 04:59:05 2011] source mask rpix=2.0, npix_max = 24, mask sum = 25, frac = 1.023
[Sun Dec 25 04:59:05 2011] Giving source the simple spatial ID 1 for pass 1, mean size = 8.58"
[Sun Dec 25 08:09:04 2011] fullrun_mos1_xmm0162360601_pi300-10000_cl_pass1_src1.ximg exists
[Sun Dec 25 08:09:04 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0162360601_pi300-10000_cl_pass1_src1.csv
[Sun Dec 25 08:09:04 2011] fullrun_mos1_xmm0162360601_pi300-10000_cl_pass1_src1_1.ximg exists
[Sun Dec 25 08:09:04 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0162360601_pi300-10000_cl_pass1_src1.csv
[Sun Dec 25 08:09:04 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0162360601_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0162360601_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Dec 25 08:09:04 2011] fullrun_mos1_xmm0162360601_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Sun Dec 25 08:09:04 2011] fullrun_mos1_xmm0162360601_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Sun Dec 25 08:09:04 2011] Fit fullrun_mos1_xmm0162360601_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Sun Dec 25 13:43:24 2011] Spatial fit model total counts = 2037.000000, observed total counts = 2037.000000
[Sun Dec 25 13:43:24 2011] Offset between fit and detection position for source 1 = 0.312680 pixels
[Sun Dec 25 13:43:24 2011] 2045.058000 total counts/ 1770.120000 bgd. counts: snr = 6.534817
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.312680 pixels
  Position = (240.6, 284.3) = 8 50 2.44 -45 41 40.6
  Extent = 5.1 (4.3-5.9)", rotation angle = 0
  Source counts = 274.9 +/- 45.2
  Background counts = 1770.1
  Rate = 0.009 +/- 0.001
[Sun Dec 25 13:43:24 2011] Vigneting correction estimate = 1.000000
[Sun Dec 25 13:43:24 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Dec 25 13:43:24 2011] Assessing source extent using major axis lower bound
[Sun Dec 25 13:43:24 2011] Source does appear to be extended
[Sun Dec 25 13:43:24 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Dec 25 18:13:24 2011] XMMSAS src. selection expression = ellipse(20886.326800, 24682.861200, 303.184789, 303.184789, 0.000000, X, Y)
[Sun Dec 25 18:13:24 2011] Writing source region out to fullrun_mos1_xmm0162360601_pi300-10000_pass1_cl_src1_src.reg
[Sun Dec 25 18:13:24 2011] Extracting stamp from image fullrun_mos1_xmm0162360601_pi300-10000_cl_sm2.00.img.gz, (223, 267) - (258, 302)
[Sun Dec 25 18:13:24 2011] XMMSAS bgd. selection expression = annulus(20886.326800, 24682.861200, 505.307982, 1010.615964, X, Y)
[Sun Dec 25 18:13:24 2011] Writing fullrun_mos1_xmm0162360601_pi300-10000_pass1_cl_src1.gif
[Sun Dec 25 18:13:38 2011] Mean detx,y = (-1640.75, 3753.04) 
[Sun Dec 25 18:13:40 2011] Setting backscal keywords in source and bgd. spectrum
[Sun Dec 25 18:13:55 2011] Binned source spectrum to 10 counts/bin
[Sun Dec 25 18:13:56 2011] Setting source spectrum file to fullrun_mos1_xmm0162360601_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Sun Dec 25 18:13:56 2011] Setting bgd. spectrum file to fullrun_mos1_xmm0162360601_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Sun Dec 25 23:51:25 2011] Updating aperture counts using extracted products
[Sun Dec 25 23:51:25 2011] Error reading totcts from fullrun_mos1_xmm0162360601_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Sun Dec 25 23:51:28 2011] Calculating source flux in energy range 0.30-8.00
[Sun Dec 25 23:51:28 2011] Using photon index=1.80, rate=0.00903, arf fullrun_mos1_xmm0162360601_pi300-10000_pass1_cl_src1.arf
[Sun Dec 25 23:51:28 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Dec 25 23:51:28 2011] Updating source flux to 1.2e-13
[Sun Dec 25 23:51:39 2011] Flag b found in src. 1 procflags, skipping spectral fitting
[Mon Dec 26 00:00:52 2011] Reading fit data from xmm0162360601/analysis//spectral/fullrun_mos1_xmm0162360601_pi300-10000_pass1_cl_src1_pl.csv
[Mon Dec 26 00:00:52 2011] Spectral fit parameter nH value = 1.04104e+22
[Mon Dec 26 00:00:52 2011] Spectral fit parameter PhoIndex value = 9.98
[Mon Dec 26 00:00:52 2011] Failed to get F(0.3-8.0) from xmm0162360601/analysis//spectral/fullrun_mos1_xmm0162360601_pi300-10000_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Mon Dec 26 00:00:52 2011] Calculating source flux in energy range 0.30-8.00
[Mon Dec 26 00:00:52 2011] Using Nh = 1e+22, photon index=9.98, rate=0.00903, arf fullrun_mos1_xmm0162360601_pi300-10000_pass1_cl_src1.arf
[Mon Dec 26 00:00:52 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Dec 26 00:00:53 2011] Updating source flux to 6.8e-14