[Tue Feb 14 12:46:31 2012] Detection parameters:
  Position = (413.6, 211.4) = 12 35 42.89 62 8 36.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 25.7 +/- 7.0
  Background counts = 3.4
  Rate = 0.002 +/- 0.0005

[Tue Feb 14 12:46:31 2012] Off-axis axis estimate = 10.46'
[Tue Feb 14 13:31:04 2012] Using EEF radius (= 11.66 ")to estimate initial spatial extent for simple fitting
[Tue Feb 14 13:31:04 2012] Initial guess for spatial extent in simple fitting = 11.66"
[Tue Feb 14 13:31:04 2012] source mask rpix=2.7, npix_max = 40, mask sum = 46, frac = 1.137
[Tue Feb 14 13:31:04 2012] Giving source the simple spatial ID 21 for pass 0, mean size = 11.66"
[Tue Feb 14 14:03:55 2012] fullrun_mos1_xmm0162160201_pi300-10000_cl_pass0_src21.ximg exists
[Tue Feb 14 14:03:55 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0162160201_pi300-10000_cl_pass0_src21.csv
[Tue Feb 14 14:03:55 2012] fullrun_mos1_xmm0162160201_pi300-10000_cl_pass0_src21_1.ximg exists
[Tue Feb 14 14:03:55 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0162160201_pi300-10000_cl_pass0_src21.csv
[Tue Feb 14 14:03:55 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0162160201_pi300-10000_cl_pass0_src21_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0162160201_pi300-10000_cl_pass0_src21.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Feb 14 14:03:55 2012] fullrun_mos1_xmm0162160201_pi300-10000_cl_pass0_tfrozen_src21.ximg exists
[Tue Feb 14 14:03:55 2012] fullrun_mos1_xmm0162160201_pi300-10000_cl_pass0_tfrozen_src21_1.ximg exists
[Tue Feb 14 14:03:55 2012] Fit fullrun_mos1_xmm0162160201_pi300-10000_cl_pass0_tfrozen_src21 appears to have run properly
[Tue Feb 14 14:31:58 2012] Spatial fit model total counts = 56.414100, observed total counts = 64.000000
[Tue Feb 14 14:31:58 2012] Offset between fit and detection position for source 20 = 0.590751 pixels
[Tue Feb 14 14:31:58 2012] 58.248100 total counts/ 40.484800 bgd. counts: snr = 2.791757
Spatial fit parameters:
  Offset between fit and detection position for source 20 = 0.590751 pixels
  Position = (413.4, 210.9) = 12 35 43.02 62 8 35.6
  Extent = 7.9" x 3.7", rotation angle = 123
  Source counts = 17.8 +/- 7.6
  Background counts = 40.5
  Rate = 0.001 +/- 0.0005
[Tue Feb 14 14:31:58 2012] Vigneting correction estimate = 1.000000
[Tue Feb 14 14:31:58 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Feb 14 14:31:58 2012] Assessing source extent using major
[Tue Feb 14 14:31:58 2012] Source does appear to be extended
[Tue Feb 14 14:31:58 2012] Computing asymmetry using major and minor axis, asym = 2.16
[Tue Feb 14 14:31:58 2012] Source is asymmetric
[Tue Feb 14 15:13:41 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue Feb 14 15:13:41 2012] Initial guess for spatial extent in simple fitting = 5.79"
[Tue Feb 14 15:13:41 2012] source mask rpix=1.3, npix_max = 13, mask sum = 12, frac = 0.895
[Tue Feb 14 15:13:41 2012] Giving source the simple spatial ID 21 for pass 1, mean size = 5.79"
[Tue Feb 14 15:46:46 2012] fullrun_mos1_xmm0162160201_pi300-10000_cl_pass1_src21.ximg exists
[Tue Feb 14 15:46:46 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0162160201_pi300-10000_cl_pass1_src21.csv
[Tue Feb 14 15:46:46 2012] fullrun_mos1_xmm0162160201_pi300-10000_cl_pass1_src21_1.ximg exists
[Tue Feb 14 15:46:46 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0162160201_pi300-10000_cl_pass1_src21.csv
[Tue Feb 14 15:46:46 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0162160201_pi300-10000_cl_pass1_src21_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0162160201_pi300-10000_cl_pass1_src21.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Feb 14 15:46:46 2012] fullrun_mos1_xmm0162160201_pi300-10000_cl_pass1_tfrozen_src21.ximg exists
[Tue Feb 14 15:46:46 2012] fullrun_mos1_xmm0162160201_pi300-10000_cl_pass1_tfrozen_src21_1.ximg exists
[Tue Feb 14 15:46:46 2012] Fit fullrun_mos1_xmm0162160201_pi300-10000_cl_pass1_tfrozen_src21 appears to have run properly
[Tue Feb 14 16:08:44 2012] Warning, spatial fit 21 centroid is now closest to src. 11
[Tue Feb 14 16:08:44 2012] Vigneting correction estimate = 1.000000
[Tue Feb 14 16:08:44 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Feb 14 16:08:44 2012] Assessing source extent using major
[Tue Feb 14 16:08:44 2012] Source does appear to be extended
[Tue Feb 14 16:08:44 2012] Computing asymmetry using major and minor axis, asym = 2.16
[Tue Feb 14 16:08:44 2012] Source is asymmetric
[Tue Feb 14 16:33:03 2012] XMMSAS src. selection expression = ellipse(35913.327600, 18299.001800, 475.127414, 219.556806, 122.900506, X, Y)
[Tue Feb 14 16:33:03 2012] Writing source region out to fullrun_mos1_xmm0162160201_pi300-10000_pass1_cl_src20_src.reg
[Tue Feb 14 16:33:03 2012] Extracting stamp from image fullrun_mos1_xmm0162160201_pi300-10000_cl_sm2.00.img.gz, (386, 184) - (441, 238)
[Tue Feb 14 16:33:03 2012] XMMSAS bgd. selection expression = annulus(35913.327600, 18299.001800, 791.879023, 1583.758046, X, Y) && !ellipse(36150.089960, 19108.585200, 489.586414, 331.836010, 81.734000, X, Y)
[Tue Feb 14 16:33:03 2012] Writing fullrun_mos1_xmm0162160201_pi300-10000_pass1_cl_src20.gif
[Tue Feb 14 16:37:32 2012] Mean detx,y = (10958.95, -3376.81) 
[Tue Feb 14 16:37:33 2012] Setting backscal keywords in source and bgd. spectrum
[Tue Feb 14 16:37:40 2012] Binned source spectrum to 10 counts/bin
[Tue Feb 14 16:37:40 2012] Setting source spectrum file to fullrun_mos1_xmm0162160201_pi300-10000_pass1_cl_src20_src_b10.pi.gz
[Tue Feb 14 16:37:40 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0162160201_pi300-10000_pass1_cl_src20_bgd.pi.gz
[Tue Feb 14 16:46:47 2012] Not generating rmf since there are only 17 counts
[Tue Feb 14 16:46:47 2012] rmf not generated due to insufficient counts
[Tue Feb 14 16:55:52 2012] Updating aperture counts using extracted products
[Tue Feb 14 16:55:52 2012] Error reading totcts from fullrun_mos1_xmm0162160201_pi300-10000_pass1_cl_src20_src_b10.pi.gz
[Tue Feb 14 16:55:52 2012] Calculating source flux in energy range 0.30-8.00
[Tue Feb 14 16:55:52 2012] Using photon index=1.80, rate=0.00119, arf fullrun_mos1_xmm0162160201_pi300-10000_pass1_cl_src20.arf
[Tue Feb 14 16:55:52 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Feb 14 16:55:52 2012] Updating source flux to 4.1e-14
[Tue Feb 14 16:55:54 2012] Source 20 has fewer than 100.000000 counts, skipping spectral fitting