[Sat Feb 11 23:34:48 2012] Detection parameters: Position = (88.0, 450.7) = 23 11 1.07 -6 33 42.5 Extent = 10.9" x 10.9", rotation angle = 0 degrees Source counts = 94.2 +/- 16.7 Background counts = 59.2 Rate = 0.0009 +/- 0.0002 [Sat Feb 11 23:34:49 2012] Off-axis axis estimate = 18.83' [Sat Feb 11 23:41:39 2012] Using EEF radius (= 15.84 ")to estimate initial spatial extent for simple fitting [Sat Feb 11 23:41:39 2012] Initial guess for spatial extent in simple fitting = 15.84" [Sat Feb 11 23:41:39 2012] source mask rpix=3.6, npix_max = 68, mask sum = 64, frac = 0.932 [Sat Feb 11 23:41:39 2012] Giving source the simple spatial ID 9 for pass 0, mean size = 15.84" [Sun Feb 12 01:23:52 2012] fullrun_pn_xmm0161560101_pi300-10000_cl_pass0_src9.ximg exists [Sun Feb 12 01:23:52 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0161560101_pi300-10000_cl_pass0_src9.csv [Sun Feb 12 01:23:52 2012] fullrun_pn_xmm0161560101_pi300-10000_cl_pass0_src9_1.ximg exists [Sun Feb 12 01:23:52 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0161560101_pi300-10000_cl_pass0_src9.csv [Sun Feb 12 01:23:52 2012] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0161560101_pi300-10000_cl_pass0_src9_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0161560101_pi300-10000_cl_pass0_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Sun Feb 12 01:23:53 2012] fullrun_pn_xmm0161560101_pi300-10000_cl_pass0_tfrozen_src9.ximg exists [Sun Feb 12 01:23:53 2012] fullrun_pn_xmm0161560101_pi300-10000_cl_pass0_tfrozen_src9_1.ximg exists [Sun Feb 12 01:23:53 2012] Fit fullrun_pn_xmm0161560101_pi300-10000_cl_pass0_tfrozen_src9 appears to have run properly [Sun Feb 12 03:10:17 2012] Spatial fit model total counts = 929.998000, observed total counts = 930.000000 [Sun Feb 12 03:10:17 2012] Offset between fit and detection position for source 10 = 0.496388 pixels [Sun Feb 12 03:10:17 2012] 937.010500 total counts/ 889.451000 bgd. counts: snr = 1.594690 Spatial fit parameters: Offset between fit and detection position for source 10 = 0.496388 pixels Position = (88.3, 450.3) = 23 11 1.00 -6 33 45.4 Extent = 4.7 (4.0-6.6)", rotation angle = 0 Source counts = 47.6 +/- 30.6 Background counts = 889.5 Rate = 0.0005 +/- 0.0003 Deleting source due to low Poisson probability