[Sat Feb 11 23:35:54 2012] Detection parameters:
  Position = (101.8, 267.7) = 23 10 57.09 -6 47 2.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 97.9 +/- 14.4
  Background counts = 18.7
  Rate = 0.0009 +/- 0.0001

[Sat Feb 11 23:35:55 2012] Off-axis axis estimate = 14.43'
[Sun Feb 12 02:07:55 2012] Using EEF radius (= 13.64 ")to estimate initial spatial extent for simple fitting
[Sun Feb 12 02:07:55 2012] Initial guess for spatial extent in simple fitting = 13.64"
[Sun Feb 12 02:07:55 2012] source mask rpix=3.1, npix_max = 52, mask sum = 49, frac = 0.926
[Sun Feb 12 02:07:55 2012] Giving source the simple spatial ID 16 for pass 0, mean size = 13.64"
[Sun Feb 12 03:10:02 2012] fullrun_mos2_xmm0161560101_pi300-10000_cl_pass0_src16.ximg exists
[Sun Feb 12 03:10:02 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0161560101_pi300-10000_cl_pass0_src16.csv
[Sun Feb 12 03:10:02 2012] fullrun_mos2_xmm0161560101_pi300-10000_cl_pass0_src16_1.ximg exists
[Sun Feb 12 03:10:02 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0161560101_pi300-10000_cl_pass0_src16.csv
[Sun Feb 12 03:10:02 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0161560101_pi300-10000_cl_pass0_src16_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0161560101_pi300-10000_cl_pass0_src16.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Feb 12 03:10:03 2012] fullrun_mos2_xmm0161560101_pi300-10000_cl_pass0_tfrozen_src16.ximg exists
[Sun Feb 12 03:10:03 2012] fullrun_mos2_xmm0161560101_pi300-10000_cl_pass0_tfrozen_src16_1.ximg exists
[Sun Feb 12 03:10:03 2012] Fit fullrun_mos2_xmm0161560101_pi300-10000_cl_pass0_tfrozen_src16 appears to have run properly
[Sun Feb 12 03:10:30 2012] Warning: source 16 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 29 at 12.796944 pixels away
[Sun Feb 12 03:10:30 2012] Vigneting correction estimate = 1.000000
[Sun Feb 12 03:10:30 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Feb 12 03:10:30 2012] Assessing source extent using major
[Sun Feb 12 03:10:30 2012] Source does appear to be extended
[Sun Feb 12 03:10:30 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Feb 12 05:22:49 2012] Using EEF radius (= 13.64 ")to estimate initial spatial extent for simple fitting
[Sun Feb 12 05:22:49 2012] Initial guess for spatial extent in simple fitting = 13.64"
[Sun Feb 12 05:22:49 2012] source mask rpix=3.1, npix_max = 52, mask sum = 49, frac = 0.926
[Sun Feb 12 05:22:49 2012] Giving source the simple spatial ID 15 for pass 1, mean size = 13.64"
[Sun Feb 12 06:13:02 2012] fullrun_mos2_xmm0161560101_pi300-10000_cl_pass1_src15.ximg exists
[Sun Feb 12 06:13:02 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0161560101_pi300-10000_cl_pass1_src15.csv
[Sun Feb 12 06:13:02 2012] fullrun_mos2_xmm0161560101_pi300-10000_cl_pass1_src15_1.ximg exists
[Sun Feb 12 06:13:02 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0161560101_pi300-10000_cl_pass1_src15.csv
[Sun Feb 12 06:13:02 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0161560101_pi300-10000_cl_pass1_src15_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0161560101_pi300-10000_cl_pass1_src15.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Feb 12 06:13:03 2012] fullrun_mos2_xmm0161560101_pi300-10000_cl_pass1_tfrozen_src15.ximg exists
[Sun Feb 12 06:13:03 2012] fullrun_mos2_xmm0161560101_pi300-10000_cl_pass1_tfrozen_src15_1.ximg exists
[Sun Feb 12 06:13:03 2012] Fit fullrun_mos2_xmm0161560101_pi300-10000_cl_pass1_tfrozen_src15 appears to have run properly
[Sun Feb 12 06:13:31 2012] Spatial fit model total counts = 337.000000, observed total counts = 337.000000
[Sun Feb 12 06:13:31 2012] Offset between fit and detection position for source 29 = 0.628557 pixels
[Sun Feb 12 06:13:31 2012] 335.309600 total counts/ 240.887000 bgd. counts: snr = 6.083721
Spatial fit parameters:
  Offset between fit and detection position for source 29 = 0.628557 pixels
  Position = (101.2, 267.4) = 23 10 57.26 -6 47 1.0
  Extent = 8.7 (6.4-11.2)", rotation angle = 0
  Source counts = 94.4 +/- 18.3
  Background counts = 240.9
  Rate = 0.0009 +/- 0.0002
[Sun Feb 12 06:13:31 2012] Vigneting correction estimate = 1.000000
[Sun Feb 12 06:13:31 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Feb 12 06:13:31 2012] Assessing source extent using major axis lower bound
[Sun Feb 12 06:13:31 2012] Source does appear to be extended
[Sun Feb 12 06:13:31 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Feb 12 10:15:51 2012] XMMSAS src. selection expression = ellipse(8754.599800, 23216.746200, 522.753015, 522.753015, 0.000000, X, Y)
[Sun Feb 12 10:15:51 2012] Writing source region out to fullrun_mos2_xmm0161560101_pi300-10000_pass1_cl_src29_src.reg
[Sun Feb 12 10:15:51 2012] Extracting stamp from image fullrun_mos2_xmm0161560101_pi300-10000_cl_sm2.00.img.gz, (71, 237) - (131, 297)
[Sun Feb 12 10:15:51 2012] XMMSAS bgd. selection expression = annulus(8754.599800, 23216.746200, 871.255025, 1742.510050, X, Y)
[Sun Feb 12 10:15:51 2012] Writing fullrun_mos2_xmm0161560101_pi300-10000_pass1_cl_src29.gif
[Sun Feb 12 10:20:07 2012] Mean detx,y = (3126.34, -11587.95) 
[Sun Feb 12 10:20:08 2012] Setting backscal keywords in source and bgd. spectrum
[Sun Feb 12 10:20:16 2012] Binned source spectrum to 10 counts/bin
[Sun Feb 12 10:20:17 2012] Setting source spectrum file to fullrun_mos2_xmm0161560101_pi300-10000_pass1_cl_src29_src_b10.pi.gz
[Sun Feb 12 10:20:17 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0161560101_pi300-10000_pass1_cl_src29_bgd.pi.gz
[Sun Feb 12 10:50:50 2012] Not generating rmf since there are only 94 counts
[Sun Feb 12 10:50:50 2012] rmf not generated due to insufficient counts
[Sun Feb 12 10:59:17 2012] Updating aperture counts using extracted products
[Sun Feb 12 10:59:17 2012] Error reading totcts from fullrun_mos2_xmm0161560101_pi300-10000_pass1_cl_src29_src_b10.pi.gz
[Sun Feb 12 10:59:17 2012] Calculating source flux in energy range 0.30-8.00
[Sun Feb 12 10:59:17 2012] Using photon index=1.80, rate=0.000912, arf fullrun_mos2_xmm0161560101_pi300-10000_pass1_cl_src29.arf
[Sun Feb 12 10:59:17 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Feb 12 10:59:17 2012] Getting flux using calc_pl_flux failed
[Sun Feb 12 11:00:11 2012] Source 29 has fewer than 100.000000 counts, skipping spectral fitting