[Sat Feb 11 23:35:20 2012] Detection parameters:
  Position = (101.7, 266.9) = 23 10 57.11 -6 47 2.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 107.1 +/- 14.5
  Background counts = 18.0
  Rate = 0.001 +/- 0.0001

[Sat Feb 11 23:35:21 2012] Off-axis axis estimate = 14.45'
[Sun Feb 12 01:23:54 2012] Using EEF radius (= 13.65 ")to estimate initial spatial extent for simple fitting
[Sun Feb 12 01:23:54 2012] Initial guess for spatial extent in simple fitting = 13.65"
[Sun Feb 12 01:23:54 2012] source mask rpix=3.1, npix_max = 52, mask sum = 49, frac = 0.925
[Sun Feb 12 01:23:54 2012] Giving source the simple spatial ID 13 for pass 0, mean size = 13.65"
[Sun Feb 12 02:07:54 2012] fullrun_mos1_xmm0161560101_pi300-10000_cl_pass0_src13.ximg exists
[Sun Feb 12 02:07:54 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0161560101_pi300-10000_cl_pass0_src13.csv
[Sun Feb 12 02:07:54 2012] fullrun_mos1_xmm0161560101_pi300-10000_cl_pass0_src13_1.ximg exists
[Sun Feb 12 02:07:54 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0161560101_pi300-10000_cl_pass0_src13.csv
[Sun Feb 12 02:07:54 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0161560101_pi300-10000_cl_pass0_src13_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0161560101_pi300-10000_cl_pass0_src13.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Feb 12 02:07:54 2012] fullrun_mos1_xmm0161560101_pi300-10000_cl_pass0_tfrozen_src13.ximg exists
[Sun Feb 12 02:07:54 2012] fullrun_mos1_xmm0161560101_pi300-10000_cl_pass0_tfrozen_src13_1.ximg exists
[Sun Feb 12 02:07:54 2012] Fit fullrun_mos1_xmm0161560101_pi300-10000_cl_pass0_tfrozen_src13 appears to have run properly
[Sun Feb 12 03:10:24 2012] Warning: source 13 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 14 at 13.884677 pixels away
[Sun Feb 12 03:10:24 2012] Vigneting correction estimate = 1.000000
[Sun Feb 12 03:10:24 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Feb 12 03:10:24 2012] Assessing source extent using major
[Sun Feb 12 03:10:24 2012] Source does appear to be extended
[Sun Feb 12 03:10:24 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Feb 12 04:36:30 2012] Using EEF radius (= 13.65 ")to estimate initial spatial extent for simple fitting
[Sun Feb 12 04:36:30 2012] Initial guess for spatial extent in simple fitting = 13.65"
[Sun Feb 12 04:36:30 2012] source mask rpix=3.1, npix_max = 52, mask sum = 49, frac = 0.925
[Sun Feb 12 04:36:30 2012] Giving source the simple spatial ID 13 for pass 1, mean size = 13.65"
[Sun Feb 12 05:22:48 2012] fullrun_mos1_xmm0161560101_pi300-10000_cl_pass1_src13.ximg exists
[Sun Feb 12 05:22:48 2012] fullrun_mos1_xmm0161560101_pi300-10000_cl_pass1_src13_1.ximg exists
[Sun Feb 12 05:22:48 2012] Fit fullrun_mos1_xmm0161560101_pi300-10000_cl_pass1_src13 appears to have run properly
[Sun Feb 12 05:22:48 2012] fullrun_mos1_xmm0161560101_pi300-10000_cl_pass1_tfrozen_src13.ximg exists
[Sun Feb 12 05:22:48 2012] fullrun_mos1_xmm0161560101_pi300-10000_cl_pass1_tfrozen_src13_1.ximg exists
[Sun Feb 12 05:22:48 2012] Fit fullrun_mos1_xmm0161560101_pi300-10000_cl_pass1_tfrozen_src13 appears to have run properly
[Sun Feb 12 06:13:24 2012] Warning: source 13 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 14 at 17.339306 pixels away
[Sun Feb 12 06:13:24 2012] Vigneting correction estimate = 1.000000
[Sun Feb 12 06:13:24 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Feb 12 06:13:24 2012] Assessing source extent using major
[Sun Feb 12 06:13:24 2012] Source does appear to be extended
[Sun Feb 12 06:13:24 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Feb 12 09:34:59 2012] XMMSAS src. selection expression = ellipse(8797.620865, 23168.185974, 652.500000, 652.500000, 0.000000, X, Y)
[Sun Feb 12 09:34:59 2012] Writing source region out to fullrun_mos1_xmm0161560101_pi300-10000_pass1_cl_src14_src.reg
[Sun Feb 12 09:34:59 2012] Extracting stamp from image fullrun_mos1_xmm0161560101_pi300-10000_cl_sm2.00.img.gz, (64, 229) - (139, 304)
[Sun Feb 12 09:34:59 2012] XMMSAS bgd. selection expression = annulus(8797.620865, 23168.185974, 1087.500000, 2175.000000, X, Y)
[Sun Feb 12 09:34:59 2012] Writing fullrun_mos1_xmm0161560101_pi300-10000_pass1_cl_src14.gif
[Sun Feb 12 09:39:08 2012] Mean detx,y = (-11373.55, -2901.81) 
[Sun Feb 12 09:39:09 2012] Setting backscal keywords in source and bgd. spectrum
[Sun Feb 12 09:39:24 2012] Binned source spectrum to 10 counts/bin
[Sun Feb 12 09:39:24 2012] Setting source spectrum file to fullrun_mos1_xmm0161560101_pi300-10000_pass1_cl_src14_src_b10.pi.gz
[Sun Feb 12 09:39:24 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0161560101_pi300-10000_pass1_cl_src14_bgd.pi.gz
[Sun Feb 12 10:11:34 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sun Feb 12 10:11:34 2012] rmf not generated due to insufficient counts
[Sun Feb 12 10:59:15 2012] Updating aperture counts using extracted products
[Sun Feb 12 10:59:15 2012] Error reading totcts from fullrun_mos1_xmm0161560101_pi300-10000_pass1_cl_src14_src_b10.pi.gz
[Sun Feb 12 10:59:16 2012] Calculating source flux in energy range 0.30-8.00
[Sun Feb 12 10:59:16 2012] Using photon index=1.80, rate=0.00102, arf fullrun_mos1_xmm0161560101_pi300-10000_pass1_cl_src14.arf
[Sun Feb 12 10:59:16 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Feb 12 10:59:16 2012] Updating source flux to 1.2e-12
[Sun Feb 12 10:59:19 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting