[Fri Feb 17 10:36:40 2012] Detection parameters:
  Position = (279.0, 284.7) = 7 48 46.15 -67 44 23.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 1846.0 +/- 63.3
  Background counts = 138.5
  Rate = 0.02 +/- 0.0008

[Fri Feb 17 10:36:45 2012] Off-axis axis estimate = 1.72'
[Fri Feb 17 12:38:08 2012] Using EEF radius (= 7.29 ")to estimate initial spatial extent for simple fitting
[Fri Feb 17 12:38:08 2012] Initial guess for spatial extent in simple fitting = 7.29"
[Fri Feb 17 12:38:08 2012] source mask rpix=1.7, npix_max = 18, mask sum = 16, frac = 0.845
[Fri Feb 17 12:38:08 2012] Giving source the simple spatial ID 6 for pass 0, mean size = 7.29"
[Fri Feb 17 23:58:30 2012] fullrun_mos2_xmm0160761301_pi300-10000_cl_pass0_src6.ximg exists
[Fri Feb 17 23:58:30 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0160761301_pi300-10000_cl_pass0_src6.csv
[Fri Feb 17 23:58:30 2012] fullrun_mos2_xmm0160761301_pi300-10000_cl_pass0_src6_1.ximg exists
[Fri Feb 17 23:58:30 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0160761301_pi300-10000_cl_pass0_src6.csv
[Fri Feb 17 23:58:30 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0160761301_pi300-10000_cl_pass0_src6_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0160761301_pi300-10000_cl_pass0_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Feb 17 23:58:31 2012] fullrun_mos2_xmm0160761301_pi300-10000_cl_pass0_tfrozen_src6.ximg exists
[Fri Feb 17 23:58:31 2012] fullrun_mos2_xmm0160761301_pi300-10000_cl_pass0_tfrozen_src6_1.ximg exists
[Fri Feb 17 23:58:31 2012] Fit fullrun_mos2_xmm0160761301_pi300-10000_cl_pass0_tfrozen_src6 appears to have run properly
[Fri Feb 17 23:58:49 2012] Spatial fit model total counts = 13007.500000, observed total counts = 13023.000000
[Fri Feb 17 23:58:49 2012] Offset between fit and detection position for source 9 = 8.304710 pixels
[Fri Feb 17 23:58:49 2012] 12280.130000 total counts/ 8329.630000 bgd. counts: snr = 43.285178
Spatial fit parameters:
  Offset between fit and detection position for source 9 = 8.304710 pixels
  Position = (272.4, 289.7) = 7 48 51.22 -67 44 2.6
  Extent = 14.6 (14.5-29.2)", rotation angle = 0
  Source counts = 3950.5 +/- 110.8
  Background counts = 8329.6
  Rate = 0.05 +/- 0.001
[Fri Feb 17 23:58:49 2012] Vigneting correction estimate = 1.000000
[Fri Feb 17 23:58:49 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Feb 17 23:58:49 2012] Assessing source extent using major axis lower bound
[Fri Feb 17 23:58:49 2012] Source does appear to be extended
[Fri Feb 17 23:58:49 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Feb 18 02:35:31 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat Feb 18 02:35:31 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sat Feb 18 02:35:31 2012] Initial guess for spatial extent in simple fitting = 14.58"
[Sat Feb 18 02:35:31 2012] source mask rpix=3.4, npix_max = 59, mask sum = 56, frac = 0.944
[Sat Feb 18 02:35:31 2012] Giving source the simple spatial ID 6 for pass 1, mean size = 14.58"
[Sat Feb 18 13:04:43 2012] fullrun_mos2_xmm0160761301_pi300-10000_cl_pass1_src6.ximg exists
[Sat Feb 18 13:04:43 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0160761301_pi300-10000_cl_pass1_src6.csv
[Sat Feb 18 13:04:43 2012] fullrun_mos2_xmm0160761301_pi300-10000_cl_pass1_src6_1.ximg exists
[Sat Feb 18 13:04:43 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0160761301_pi300-10000_cl_pass1_src6.csv
[Sat Feb 18 13:04:43 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0160761301_pi300-10000_cl_pass1_src6_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0160761301_pi300-10000_cl_pass1_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Feb 18 13:04:44 2012] fullrun_mos2_xmm0160761301_pi300-10000_cl_pass1_tfrozen_src6.ximg exists
[Sat Feb 18 13:04:44 2012] fullrun_mos2_xmm0160761301_pi300-10000_cl_pass1_tfrozen_src6_1.ximg exists
[Sat Feb 18 13:04:44 2012] Fit fullrun_mos2_xmm0160761301_pi300-10000_cl_pass1_tfrozen_src6 appears to have run properly
[Sat Feb 18 13:05:02 2012] Warning, spatial fit 6 centroid is now closest to src. 2
[Sat Feb 18 13:05:02 2012] Source 9 is offset by 4.760690 and -4.208483 pixels which is larger than
2 X fitted extent = 1.525462 x 1.525462, not incorporating fit results
[Sat Feb 18 13:05:02 2012] Vigneting correction estimate = 1.000000
[Sat Feb 18 13:05:02 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Feb 18 13:05:02 2012] Assessing source extent using major axis lower bound
[Sat Feb 18 13:05:02 2012] Source does appear to be extended
[Sat Feb 18 13:05:02 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Feb 18 13:05:02 2012] Source is confused with source 46
[Sat Feb 18 15:06:45 2012] Counts = 3950.500000, rescaling region sizes by 2.000000
[Sat Feb 18 15:06:45 2012] XMMSAS src. selection expression = ellipse(23649.618000, 25159.200000, 1749.516050, 1749.516050, 0.000000, X, Y)
[Sat Feb 18 15:06:45 2012] Writing source region out to fullrun_mos2_xmm0160761301_pi300-10000_pass1_cl_src9_src.reg
[Sat Feb 18 15:06:45 2012] Extracting stamp from image fullrun_mos2_xmm0160761301_pi300-10000_cl_sm2.00.img.gz, (172, 189) - (373, 390)
[Sat Feb 18 15:06:45 2012] XMMSAS bgd. selection expression = annulus(23649.618000, 25159.200000, 5831.720168, 11663.440336, X, Y) && !ellipse(25611.181200, 23883.673000, 2576.136074, 2576.136074, 0.000000, X, Y) && !ellipse(24696.102234, 23611.448425, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23956.240000, 24300.830000, 1184.256034, 1184.256034, 0.000000, X, Y) && !ellipse(24934.210571, 23258.879120, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25426.678680, 22205.159058, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24452.925200, 31383.649000, 474.864014, 474.864014, 0.000000, X, Y) && !ellipse(28031.448000, 24410.567000, 1175.896034, 1175.896034, 0.000000, X, Y) && !ellipse(25149.104800, 16063.806400, 572.374416, 381.699211, 354.567306, X, Y) && !ellipse(25829.061644, 33716.651105, 458.029994, 245.891748, 9.637860, X, Y) && !ellipse(35812.601044, 24406.812897, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28203.588000, 23480.043000, 1279.048037, 1279.048037, 0.000000, X, Y) && !ellipse(24482.255554, 26221.721893, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28591.439087, 16746.037827, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28610.148000, 23325.520640, 724.393621, 724.393621, 0.000000, X, Y) && !ellipse(22323.562000, 25790.930000, 1285.040037, 651.968019, 31.909000, X, Y) && !ellipse(27948.142000, 19000.376000, 1429.536041, 1429.536041, 0.000000, X, Y) && !ellipse(20355.783200, 18109.468800, 1594.744046, 1022.776029, 231.106271, X, Y) && !ellipse(28018.495200, 18689.319600, 1059.176030, 1059.176030, 0.000000, X, Y) && !ellipse(26848.006520, 30461.774400, 351.348010, 351.348010, 0.000000, X, Y) && !ellipse(24041.460000, 26904.150000, 1665.368048, 1665.368048, 359.900000, X, Y) && !ellipse(23844.146000, 27693.528000, 1180.184034, 1180.184034, 0.000000, X, Y) && !ellipse(27415.098000, 20042.940000, 2871.600083, 580.830417, 63.672000, X, Y) && !ellipse(23418.034000, 28272.082000, 1459.744042, 1459.744042, 0.000000, X, Y) && !ellipse(27665.152000, 19566.520000, 1195.808034, 1195.808034, 0.000000, X, Y) && !ellipse(17478.979904, 16040.527512, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18407.681274, 23184.057739, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34604.987518, 26448.071106, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(11682.274353, 20068.245453, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27309.628000, 20361.234000, 1412.848041, 1412.848041, 0.000000, X, Y) && !ellipse(23075.502000, 29255.540000, 1282.560037, 1282.560037, 0.000000, X, Y) && !ellipse(23502.650635, 26380.553711, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27025.664000, 20782.370000, 1333.504038, 1333.504038, 0.000000, X, Y) && !ellipse(35669.022369, 28480.095123, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24869.802216, 26910.449768, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31792.738007, 33791.534332, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34440.726166, 17165.647949, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(13918.502000, 28398.062200, 1877.328054, 1877.328054, 0.000000, X, Y) && !ellipse(26467.850000, 21688.768000, 1370.840039, 1370.840039, 0.000000, X, Y) && !ellipse(22463.676000, 24319.595600, 2119.928061, 2119.928061, 0.000000, X, Y) && !ellipse(26505.252472, 26814.834198, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21985.192535, 24660.108002, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32778.356567, 32293.041107, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27971.666000, 25594.181338, 1205.672035, 646.718700, 354.343007, X, Y) && !ellipse(21269.079200, 24113.890000, 1350.128039, 1350.128039, 0.000000, X, Y) && !ellipse(24030.708000, 27431.650000, 1188.352034, 1188.352034, 0.000000, X, Y)
[Sat Feb 18 15:06:45 2012] Writing fullrun_mos2_xmm0160761301_pi300-10000_pass1_cl_src9.gif
[Sat Feb 18 15:31:01 2012] Mean detx,y = (-688.51, -1175.22) 
[Sat Feb 18 15:31:04 2012] Setting backscal keywords in source and bgd. spectrum
[Sat Feb 18 15:35:34 2012] Binned source spectrum to 10 counts/bin
[Sat Feb 18 15:35:34 2012] Setting source spectrum file to fullrun_mos2_xmm0160761301_pi300-10000_pass1_cl_src9_src_b10.pi.gz
[Sat Feb 18 15:35:34 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0160761301_pi300-10000_pass1_cl_src9_bgd.pi.gz
[Sat Feb 18 21:01:57 2012] Updating aperture counts using extracted products
[Sat Feb 18 21:01:57 2012] Error reading totcts from fullrun_mos2_xmm0160761301_pi300-10000_pass1_cl_src9_src_b10.pi.gz
[Sat Feb 18 21:01:58 2012] Calculating source flux in energy range 0.30-8.00
[Sat Feb 18 21:01:58 2012] Using photon index=1.80, rate=0.0469, arf fullrun_mos2_xmm0160761301_pi300-10000_pass1_cl_src9.arf
[Sat Feb 18 21:01:58 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Feb 18 21:01:58 2012] Updating source flux to 4.1e-13
[Sat Feb 18 21:02:51 2012] Flag b found in src. 9 procflags, skipping spectral fitting
[Sat Feb 18 21:02:51 2012] Flag c found in src. 9 procflags, skipping spectral fitting