[Fri Feb 17 10:36:45 2012] Detection parameters:
  Position = (323.4, 213.2) = 7 48 12.09 -67 49 32.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 189.7 +/- 21.0
  Background counts = 96.0
  Rate = 0.003 +/- 0.0003

[Fri Feb 17 10:36:45 2012] Off-axis axis estimate = 6.44'
[Fri Feb 17 12:38:08 2012] Using EEF radius (= 9.65 ")to estimate initial spatial extent for simple fitting
[Fri Feb 17 12:38:08 2012] Initial guess for spatial extent in simple fitting = 9.65"
[Fri Feb 17 12:38:08 2012] source mask rpix=2.2, npix_max = 29, mask sum = 24, frac = 0.812
[Fri Feb 17 12:38:08 2012] Giving source the simple spatial ID 21 for pass 0, mean size = 9.65"
[Fri Feb 17 23:58:30 2012] fullrun_mos2_xmm0160761301_pi300-10000_cl_pass0_src21.ximg exists
[Fri Feb 17 23:58:30 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0160761301_pi300-10000_cl_pass0_src21.csv
[Fri Feb 17 23:58:30 2012] fullrun_mos2_xmm0160761301_pi300-10000_cl_pass0_src21_1.ximg exists
[Fri Feb 17 23:58:30 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0160761301_pi300-10000_cl_pass0_src21.csv
[Fri Feb 17 23:58:30 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0160761301_pi300-10000_cl_pass0_src21_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0160761301_pi300-10000_cl_pass0_src21.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Feb 17 23:58:32 2012] fullrun_mos2_xmm0160761301_pi300-10000_cl_pass0_tfrozen_src21.ximg exists
[Fri Feb 17 23:58:32 2012] fullrun_mos2_xmm0160761301_pi300-10000_cl_pass0_tfrozen_src21_1.ximg exists
[Fri Feb 17 23:58:32 2012] Fit fullrun_mos2_xmm0160761301_pi300-10000_cl_pass0_tfrozen_src21 appears to have run properly
[Fri Feb 17 23:58:49 2012] Warning, spatial fit 21 centroid is now closest to src. 59
[Fri Feb 17 23:58:49 2012] Vigneting correction estimate = 1.000000
[Fri Feb 17 23:58:49 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Feb 17 23:58:49 2012] Assessing source extent using major
[Fri Feb 17 23:58:49 2012] Source does appear to be extended
[Fri Feb 17 23:58:49 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Feb 17 23:58:49 2012] Source is confused with source 59
[Sat Feb 18 02:35:31 2012] Using EEF radius (= 9.65 ")to estimate initial spatial extent for simple fitting
[Sat Feb 18 02:35:31 2012] Initial guess for spatial extent in simple fitting = 9.65"
[Sat Feb 18 02:35:31 2012] source mask rpix=2.2, npix_max = 29, mask sum = 24, frac = 0.812
[Sat Feb 18 02:35:31 2012] Giving source the simple spatial ID 21 for pass 1, mean size = 9.65"
[Sat Feb 18 13:04:43 2012] fullrun_mos2_xmm0160761301_pi300-10000_cl_pass1_src21.ximg exists
[Sat Feb 18 13:04:43 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0160761301_pi300-10000_cl_pass1_src21.csv
[Sat Feb 18 13:04:43 2012] fullrun_mos2_xmm0160761301_pi300-10000_cl_pass1_src21_1.ximg exists
[Sat Feb 18 13:04:43 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0160761301_pi300-10000_cl_pass1_src21.csv
[Sat Feb 18 13:04:43 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0160761301_pi300-10000_cl_pass1_src21_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0160761301_pi300-10000_cl_pass1_src21.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Feb 18 13:04:44 2012] fullrun_mos2_xmm0160761301_pi300-10000_cl_pass1_tfrozen_src21.ximg exists
[Sat Feb 18 13:04:44 2012] fullrun_mos2_xmm0160761301_pi300-10000_cl_pass1_tfrozen_src21_1.ximg exists
[Sat Feb 18 13:04:44 2012] Fit fullrun_mos2_xmm0160761301_pi300-10000_cl_pass1_tfrozen_src21 appears to have run properly
[Sat Feb 18 13:05:02 2012] Spatial fit model total counts = 818.233000, observed total counts = 821.000000
[Sat Feb 18 13:05:02 2012] Offset between fit and detection position for source 60 = 2.302890 pixels
[Sat Feb 18 13:05:02 2012] 834.565000 total counts/ 408.664000 bgd. counts: snr = 21.068105
Spatial fit parameters:
  Offset between fit and detection position for source 60 = 2.302890 pixels
  Position = (322.6, 215.4) = 7 48 12.72 -67 49 26.1
  Extent = 13.2 (11.3-17.2)", rotation angle = 0
  Source counts = 425.9 +/- 28.9
  Background counts = 408.7
  Rate = 0.005 +/- 0.0003
[Sat Feb 18 13:05:02 2012] Vigneting correction estimate = 1.000000
[Sat Feb 18 13:05:02 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Feb 18 13:05:02 2012] Assessing source extent using major axis lower bound
[Sat Feb 18 13:05:02 2012] Source does appear to be extended
[Sat Feb 18 13:05:02 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Feb 18 15:06:45 2012] XMMSAS src. selection expression = ellipse(28018.495200, 18689.319600, 794.382023, 794.382023, 0.000000, X, Y)
[Sat Feb 18 15:06:45 2012] Writing source region out to fullrun_mos2_xmm0160761301_pi300-10000_pass1_cl_src60_src.reg
[Sat Feb 18 15:06:45 2012] Extracting stamp from image fullrun_mos2_xmm0160761301_pi300-10000_cl_sm2.00.img.gz, (277, 170) - (368, 261)
[Sat Feb 18 15:06:45 2012] XMMSAS bgd. selection expression = annulus(28018.495200, 18689.319600, 1323.970038, 2647.940076, X, Y) && !ellipse(25611.181200, 23883.673000, 2576.136074, 2576.136074, 0.000000, X, Y) && !ellipse(25426.678680, 22205.159058, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25149.104800, 16063.806400, 572.374416, 381.699211, 354.567306, X, Y) && !ellipse(28591.439087, 16746.037827, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27948.142000, 19000.376000, 1429.536041, 1429.536041, 0.000000, X, Y) && !ellipse(27415.098000, 20042.940000, 2871.600083, 580.830417, 63.672000, X, Y) && !ellipse(27665.152000, 19566.520000, 1195.808034, 1195.808034, 0.000000, X, Y) && !ellipse(27309.628000, 20361.234000, 1412.848041, 1412.848041, 0.000000, X, Y) && !ellipse(27025.664000, 20782.370000, 1333.504038, 1333.504038, 0.000000, X, Y) && !ellipse(26467.850000, 21688.768000, 1370.840039, 1370.840039, 0.000000, X, Y)
[Sat Feb 18 15:06:45 2012] Writing fullrun_mos2_xmm0160761301_pi300-10000_pass1_cl_src60.gif
[Sat Feb 18 15:45:08 2012] Mean detx,y = (83.40, 5696.91) 
[Sat Feb 18 15:45:09 2012] Setting backscal keywords in source and bgd. spectrum
[Sat Feb 18 15:45:35 2012] Binned source spectrum to 10 counts/bin
[Sat Feb 18 15:45:35 2012] Setting source spectrum file to fullrun_mos2_xmm0160761301_pi300-10000_pass1_cl_src60_src_b10.pi.gz
[Sat Feb 18 15:45:35 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0160761301_pi300-10000_pass1_cl_src60_bgd.pi.gz
[Sat Feb 18 21:01:57 2012] Updating aperture counts using extracted products
[Sat Feb 18 21:01:57 2012] Error reading totcts from fullrun_mos2_xmm0160761301_pi300-10000_pass1_cl_src60_src_b10.pi.gz
[Sat Feb 18 21:01:58 2012] Calculating source flux in energy range 0.30-8.00
[Sat Feb 18 21:01:58 2012] Using photon index=1.80, rate=0.00505, arf fullrun_mos2_xmm0160761301_pi300-10000_pass1_cl_src60.arf
[Sat Feb 18 21:01:58 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Feb 18 21:01:58 2012] Updating source flux to 7.1e-14
[Sat Feb 18 21:02:51 2012] Flag c found in src. 60 procflags, skipping spectral fitting