[Fri Feb 17 10:36:39 2012] Detection parameters:
  Position = (288.8, 263.8) = 7 48 38.67 -67 45 54.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 3312.3 +/- 85.0
  Background counts = 136.4
  Rate = 0.04 +/- 0.001

[Fri Feb 17 10:36:45 2012] Off-axis axis estimate = 2.60'
[Fri Feb 17 12:38:08 2012] Using EEF radius (= 7.73 ")to estimate initial spatial extent for simple fitting
[Fri Feb 17 12:38:08 2012] Initial guess for spatial extent in simple fitting = 7.73"
[Fri Feb 17 12:38:08 2012] source mask rpix=1.8, npix_max = 20, mask sum = 15, frac = 0.723
[Fri Feb 17 12:38:08 2012] Giving source the simple spatial ID 5 for pass 0, mean size = 7.73"
[Fri Feb 17 23:58:30 2012] fullrun_mos2_xmm0160761301_pi300-10000_cl_pass0_src5.ximg exists
[Fri Feb 17 23:58:30 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0160761301_pi300-10000_cl_pass0_src5.csv
[Fri Feb 17 23:58:30 2012] fullrun_mos2_xmm0160761301_pi300-10000_cl_pass0_src5_1.ximg exists
[Fri Feb 17 23:58:30 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0160761301_pi300-10000_cl_pass0_src5.csv
[Fri Feb 17 23:58:30 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0160761301_pi300-10000_cl_pass0_src5_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0160761301_pi300-10000_cl_pass0_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Feb 17 23:58:31 2012] fullrun_mos2_xmm0160761301_pi300-10000_cl_pass0_tfrozen_src5.ximg exists
[Fri Feb 17 23:58:31 2012] fullrun_mos2_xmm0160761301_pi300-10000_cl_pass0_tfrozen_src5_1.ximg exists
[Fri Feb 17 23:58:31 2012] Fit fullrun_mos2_xmm0160761301_pi300-10000_cl_pass0_tfrozen_src5 appears to have run properly
[Fri Feb 17 23:58:49 2012] Warning, spatial fit 5 centroid is now closest to src. 3
[Fri Feb 17 23:58:49 2012] Vigneting correction estimate = 1.000000
[Fri Feb 17 23:58:49 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Feb 17 23:58:49 2012] Assessing source extent using major
[Fri Feb 17 23:58:49 2012] Source does appear to be extended
[Fri Feb 17 23:58:49 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Feb 17 23:58:49 2012] Source is confused with source 3
[Sat Feb 18 02:35:31 2012] Using EEF radius (= 7.73 ")to estimate initial spatial extent for simple fitting
[Sat Feb 18 02:35:31 2012] Initial guess for spatial extent in simple fitting = 7.73"
[Sat Feb 18 02:35:31 2012] source mask rpix=1.8, npix_max = 20, mask sum = 15, frac = 0.723
[Sat Feb 18 02:35:31 2012] Giving source the simple spatial ID 5 for pass 1, mean size = 7.73"
[Sat Feb 18 13:04:43 2012] fullrun_mos2_xmm0160761301_pi300-10000_cl_pass1_src5.ximg exists
[Sat Feb 18 13:04:43 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0160761301_pi300-10000_cl_pass1_src5.csv
[Sat Feb 18 13:04:43 2012] fullrun_mos2_xmm0160761301_pi300-10000_cl_pass1_src5_1.ximg exists
[Sat Feb 18 13:04:43 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0160761301_pi300-10000_cl_pass1_src5.csv
[Sat Feb 18 13:04:43 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0160761301_pi300-10000_cl_pass1_src5_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0160761301_pi300-10000_cl_pass1_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Feb 18 13:04:44 2012] fullrun_mos2_xmm0160761301_pi300-10000_cl_pass1_tfrozen_src5.ximg exists
[Sat Feb 18 13:04:44 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0160761301_pi300-10000_cl_pass1_tfrozen_src5.csv
[Sat Feb 18 13:04:44 2012] fullrun_mos2_xmm0160761301_pi300-10000_cl_pass1_tfrozen_src5_1.ximg exists
[Sat Feb 18 13:04:44 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0160761301_pi300-10000_cl_pass1_tfrozen_src5.csv
[Sat Feb 18 13:04:44 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0160761301_pi300-10000_cl_pass1_tfrozen_src5_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0160761301_pi300-10000_cl_pass1_tfrozen_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Feb 18 13:05:02 2012] Spatial fit model total counts = 129012.000000, observed total counts = 134852.000000
[Sat Feb 18 13:05:02 2012] Offset between fit and detection position for source 4 = 5.269076 pixels
[Sat Feb 18 13:05:02 2012] Warning, changing simple spatial fit ID from 5 to 4
[Sat Feb 18 13:05:02 2012] 25600.304883 total counts/ 25600.000000 bgd. counts: snr = 0.001906
Spatial fit parameters:
  Offset between fit and detection position for source 4 = 5.269076 pixels
  Position = (293.8, 262.2) = 7 48 34.84 -67 46 2.6
  Extent = 14.8" x 14.8", rotation angle = 0
  Source counts = 0.3 +/- 160.0
  Background counts = 25600.0
  Rate = 4e-06 +/- 0.002
  Deleting source due to low Poisson probability