[Fri Feb 17 10:36:42 2012] Detection parameters:
  Position = (282.6, 321.0) = 7 48 43.35 -67 41 48.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 75.2 +/- 18.5
  Background counts = 119.2
  Rate = 0.0009 +/- 0.0002

[Fri Feb 17 10:36:45 2012] Off-axis axis estimate = 2.00'
[Fri Feb 17 12:38:08 2012] Using EEF radius (= 7.43 ")to estimate initial spatial extent for simple fitting
[Fri Feb 17 12:38:08 2012] Initial guess for spatial extent in simple fitting = 7.43"
[Fri Feb 17 12:38:08 2012] source mask rpix=1.7, npix_max = 19, mask sum = 20, frac = 1.026
[Fri Feb 17 12:38:08 2012] Giving source the simple spatial ID 63 for pass 0, mean size = 7.43"
[Fri Feb 17 23:58:31 2012] fullrun_mos2_xmm0160761301_pi300-10000_cl_pass0_src63.ximg exists
[Fri Feb 17 23:58:31 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0160761301_pi300-10000_cl_pass0_src63.csv
[Fri Feb 17 23:58:31 2012] fullrun_mos2_xmm0160761301_pi300-10000_cl_pass0_src63_1.ximg exists
[Fri Feb 17 23:58:31 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0160761301_pi300-10000_cl_pass0_src63.csv
[Fri Feb 17 23:58:31 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0160761301_pi300-10000_cl_pass0_src63_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0160761301_pi300-10000_cl_pass0_src63.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Feb 17 23:58:32 2012] fullrun_mos2_xmm0160761301_pi300-10000_cl_pass0_tfrozen_src63.ximg exists
[Fri Feb 17 23:58:32 2012] fullrun_mos2_xmm0160761301_pi300-10000_cl_pass0_tfrozen_src63_1.ximg exists
[Fri Feb 17 23:58:32 2012] Fit fullrun_mos2_xmm0160761301_pi300-10000_cl_pass0_tfrozen_src63 appears to have run properly
[Fri Feb 17 23:58:49 2012] Spatial fit model total counts = 1501.090000, observed total counts = 1498.000000
[Fri Feb 17 23:58:49 2012] Offset between fit and detection position for source 29 = 7.808226 pixels
[Fri Feb 17 23:58:49 2012] 1431.094000 total counts/ 1174.860000 bgd. counts: snr = 7.475559
Spatial fit parameters:
  Offset between fit and detection position for source 29 = 7.808226 pixels
  Position = (276.8, 315.9) = 7 48 47.85 -67 42 9.0
  Extent = 14.9 (14.8-29.7)", rotation angle = 0
  Source counts = 256.2 +/- 37.8
  Background counts = 1174.9
  Rate = 0.003 +/- 0.0004
[Fri Feb 17 23:58:49 2012] Vigneting correction estimate = 1.000000
[Fri Feb 17 23:58:49 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Feb 17 23:58:49 2012] Assessing source extent using major axis lower bound
[Fri Feb 17 23:58:49 2012] Source does appear to be extended
[Fri Feb 17 23:58:49 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Feb 17 23:58:49 2012] Source is confused with source 30
[Sat Feb 18 02:35:31 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat Feb 18 02:35:31 2012] Initial guess for spatial extent in simple fitting = 14.85"
[Sat Feb 18 02:35:31 2012] source mask rpix=3.4, npix_max = 61, mask sum = 64, frac = 1.044
[Sat Feb 18 02:35:31 2012] Giving source the simple spatial ID 56 for pass 1, mean size = 14.85"
[Sat Feb 18 13:04:44 2012] fullrun_mos2_xmm0160761301_pi300-10000_cl_pass1_src56.ximg exists
[Sat Feb 18 13:04:44 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0160761301_pi300-10000_cl_pass1_src56.csv
[Sat Feb 18 13:04:44 2012] fullrun_mos2_xmm0160761301_pi300-10000_cl_pass1_src56_1.ximg exists
[Sat Feb 18 13:04:44 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0160761301_pi300-10000_cl_pass1_src56.csv
[Sat Feb 18 13:04:44 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0160761301_pi300-10000_cl_pass1_src56_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0160761301_pi300-10000_cl_pass1_src56.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Feb 18 13:04:45 2012] fullrun_mos2_xmm0160761301_pi300-10000_cl_pass1_tfrozen_src56.ximg exists
[Sat Feb 18 13:04:45 2012] fullrun_mos2_xmm0160761301_pi300-10000_cl_pass1_tfrozen_src56_1.ximg exists
[Sat Feb 18 13:04:45 2012] Fit fullrun_mos2_xmm0160761301_pi300-10000_cl_pass1_tfrozen_src56 appears to have run properly
[Sat Feb 18 13:05:02 2012] Warning, spatial fit 56 centroid is now closest to src. 27
[Sat Feb 18 13:05:02 2012] Vigneting correction estimate = 1.000000
[Sat Feb 18 13:05:02 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Feb 18 13:05:02 2012] Assessing source extent using major axis lower bound
[Sat Feb 18 13:05:02 2012] Source does appear to be extended
[Sat Feb 18 13:05:02 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Feb 18 15:06:46 2012] XMMSAS src. selection expression = ellipse(24030.708000, 27431.650000, 891.264026, 891.264026, 0.000000, X, Y)
[Sat Feb 18 15:06:46 2012] Writing source region out to fullrun_mos2_xmm0160761301_pi300-10000_pass1_cl_src29_src.reg
[Sat Feb 18 15:06:46 2012] Extracting stamp from image fullrun_mos2_xmm0160761301_pi300-10000_cl_sm2.00.img.gz, (226, 265) - (328, 367)
[Sat Feb 18 15:06:46 2012] XMMSAS bgd. selection expression = annulus(24030.708000, 27431.650000, 1485.440043, 2970.880085, X, Y) && !ellipse(25611.181200, 23883.673000, 2576.136074, 2576.136074, 0.000000, X, Y) && !ellipse(24696.102234, 23611.448425, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23956.240000, 24300.830000, 1184.256034, 1184.256034, 0.000000, X, Y) && !ellipse(23649.618000, 25159.200000, 1166.344034, 1166.344034, 0.000000, X, Y) && !ellipse(28031.448000, 24410.567000, 1175.896034, 1175.896034, 0.000000, X, Y) && !ellipse(28203.588000, 23480.043000, 1279.048037, 1279.048037, 0.000000, X, Y) && !ellipse(24482.255554, 26221.721893, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22323.562000, 25790.930000, 1285.040037, 651.968019, 31.909000, X, Y) && !ellipse(26848.006520, 30461.774400, 351.348010, 351.348010, 0.000000, X, Y) && !ellipse(24041.460000, 26904.150000, 1665.368048, 1665.368048, 359.900000, X, Y) && !ellipse(23844.146000, 27693.528000, 1180.184034, 1180.184034, 0.000000, X, Y) && !ellipse(23418.034000, 28272.082000, 1459.744042, 1459.744042, 0.000000, X, Y) && !ellipse(23075.502000, 29255.540000, 1282.560037, 1282.560037, 0.000000, X, Y) && !ellipse(23502.650635, 26380.553711, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24869.802216, 26910.449768, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22463.676000, 24319.595600, 2119.928061, 2119.928061, 0.000000, X, Y) && !ellipse(26505.252472, 26814.834198, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21985.192535, 24660.108002, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27971.666000, 25594.181338, 1205.672035, 646.718700, 354.343007, X, Y) && !ellipse(21269.079200, 24113.890000, 1350.128039, 1350.128039, 0.000000, X, Y)
[Sat Feb 18 15:06:46 2012] Writing fullrun_mos2_xmm0160761301_pi300-10000_pass1_cl_src29.gif
[Sat Feb 18 16:07:18 2012] Mean detx,y = (130.33, -3726.78) 
[Sat Feb 18 16:07:19 2012] Setting backscal keywords in source and bgd. spectrum
[Sat Feb 18 16:07:31 2012] Binned source spectrum to 10 counts/bin
[Sat Feb 18 16:07:31 2012] Setting source spectrum file to fullrun_mos2_xmm0160761301_pi300-10000_pass1_cl_src29_src_b10.pi.gz
[Sat Feb 18 16:07:31 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0160761301_pi300-10000_pass1_cl_src29_bgd.pi.gz
[Sat Feb 18 21:01:57 2012] Updating aperture counts using extracted products
[Sat Feb 18 21:01:57 2012] Error reading totcts from fullrun_mos2_xmm0160761301_pi300-10000_pass1_cl_src29_src_b10.pi.gz
[Sat Feb 18 21:01:59 2012] Calculating source flux in energy range 0.30-8.00
[Sat Feb 18 21:01:59 2012] Using photon index=1.80, rate=0.00304, arf fullrun_mos2_xmm0160761301_pi300-10000_pass1_cl_src29.arf
[Sat Feb 18 21:01:59 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Feb 18 21:01:59 2012] Updating source flux to 2.9e-14
[Sat Feb 18 21:02:51 2012] Flag c found in src. 29 procflags, skipping spectral fitting