[Fri Feb 17 10:36:42 2012] Detection parameters:
  Position = (263.2, 341.4) = 7 48 58.21 -67 40 13.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 133.1 +/- 17.3
  Background counts = 99.8
  Rate = 0.002 +/- 0.0003

[Fri Feb 17 10:36:45 2012] Off-axis axis estimate = 4.03'
[Fri Feb 17 12:38:08 2012] Using EEF radius (= 8.44 ")to estimate initial spatial extent for simple fitting
[Fri Feb 17 12:38:08 2012] Initial guess for spatial extent in simple fitting = 8.44"
[Fri Feb 17 12:38:08 2012] source mask rpix=1.9, npix_max = 23, mask sum = 24, frac = 1.007
[Fri Feb 17 12:38:08 2012] Giving source the simple spatial ID 37 for pass 0, mean size = 8.44"
[Fri Feb 17 23:58:31 2012] fullrun_mos2_xmm0160761301_pi300-10000_cl_pass0_src37.ximg exists
[Fri Feb 17 23:58:31 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0160761301_pi300-10000_cl_pass0_src37.csv
[Fri Feb 17 23:58:31 2012] fullrun_mos2_xmm0160761301_pi300-10000_cl_pass0_src37_1.ximg exists
[Fri Feb 17 23:58:31 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0160761301_pi300-10000_cl_pass0_src37.csv
[Fri Feb 17 23:58:31 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0160761301_pi300-10000_cl_pass0_src37_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0160761301_pi300-10000_cl_pass0_src37.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Feb 17 23:58:32 2012] fullrun_mos2_xmm0160761301_pi300-10000_cl_pass0_tfrozen_src37.ximg exists
[Fri Feb 17 23:58:32 2012] fullrun_mos2_xmm0160761301_pi300-10000_cl_pass0_tfrozen_src37_1.ximg exists
[Fri Feb 17 23:58:32 2012] Fit fullrun_mos2_xmm0160761301_pi300-10000_cl_pass0_tfrozen_src37 appears to have run properly
[Fri Feb 17 23:58:49 2012] Spatial fit model total counts = 1284.610000, observed total counts = 1283.000000
[Fri Feb 17 23:58:49 2012] Offset between fit and detection position for source 25 = 5.749484 pixels
[Fri Feb 17 23:58:49 2012] Warning, changing simple spatial fit ID from 37 to 26
[Fri Feb 17 23:58:49 2012] 1243.354000 total counts/ 826.817000 bgd. counts: snr = 14.486014
Spatial fit parameters:
  Offset between fit and detection position for source 25 = 5.749484 pixels
  Position = (266.2, 336.5) = 7 48 55.88 -67 40 39.1
  Extent = 16.0 (16.0-32.1)", rotation angle = 0
  Source counts = 416.5 +/- 35.3
  Background counts = 826.8
  Rate = 0.005 +/- 0.0004
[Fri Feb 17 23:58:49 2012] Vigneting correction estimate = 1.000000
[Fri Feb 17 23:58:49 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Feb 17 23:58:49 2012] Assessing source extent using major axis lower bound
[Fri Feb 17 23:58:49 2012] Source does appear to be extended
[Fri Feb 17 23:58:49 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Feb 17 23:58:49 2012] Source is confused with source 27
[Sat Feb 18 02:35:31 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat Feb 18 02:35:31 2012] Initial guess for spatial extent in simple fitting = 16.03"
[Sat Feb 18 02:35:31 2012] source mask rpix=3.7, npix_max = 70, mask sum = 72, frac = 1.027
[Sat Feb 18 02:35:31 2012] Giving source the simple spatial ID 35 for pass 1, mean size = 16.03"
[Sat Feb 18 13:04:44 2012] fullrun_mos2_xmm0160761301_pi300-10000_cl_pass1_src35.ximg exists
[Sat Feb 18 13:04:44 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0160761301_pi300-10000_cl_pass1_src35.csv
[Sat Feb 18 13:04:44 2012] fullrun_mos2_xmm0160761301_pi300-10000_cl_pass1_src35_1.ximg exists
[Sat Feb 18 13:04:44 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0160761301_pi300-10000_cl_pass1_src35.csv
[Sat Feb 18 13:04:44 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0160761301_pi300-10000_cl_pass1_src35_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0160761301_pi300-10000_cl_pass1_src35.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Feb 18 13:04:45 2012] fullrun_mos2_xmm0160761301_pi300-10000_cl_pass1_tfrozen_src35.ximg exists
[Sat Feb 18 13:04:45 2012] fullrun_mos2_xmm0160761301_pi300-10000_cl_pass1_tfrozen_src35_1.ximg exists
[Sat Feb 18 13:04:45 2012] Fit fullrun_mos2_xmm0160761301_pi300-10000_cl_pass1_tfrozen_src35 appears to have run properly
[Sat Feb 18 13:05:02 2012] Spatial fit model total counts = 1282.370000, observed total counts = 1283.000000
[Sat Feb 18 13:05:02 2012] Offset between fit and detection position for source 25 = 0.537572 pixels
[Sat Feb 18 13:05:02 2012] Warning, changing simple spatial fit ID from 35 to 26
[Sat Feb 18 13:05:02 2012] 1123.126000 total counts/ 720.687000 bgd. counts: snr = 14.990866
Spatial fit parameters:
  Offset between fit and detection position for source 25 = 0.537572 pixels
  Position = (265.8, 336.8) = 7 48 56.21 -67 40 37.8
  Extent = 16.0 (16.0-32.1)", rotation angle = 0
  Source counts = 402.4 +/- 33.5
  Background counts = 720.7
  Rate = 0.005 +/- 0.0004
[Sat Feb 18 13:05:02 2012] Vigneting correction estimate = 1.000000
[Sat Feb 18 13:05:02 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Feb 18 13:05:02 2012] Assessing source extent using major axis lower bound
[Sat Feb 18 13:05:02 2012] Source does appear to be extended
[Sat Feb 18 13:05:02 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Feb 18 15:06:46 2012] XMMSAS src. selection expression = ellipse(23075.502000, 29255.540000, 961.920028, 961.920028, 0.000000, X, Y)
[Sat Feb 18 15:06:46 2012] Writing source region out to fullrun_mos2_xmm0160761301_pi300-10000_pass1_cl_src25_src.reg
[Sat Feb 18 15:06:46 2012] Extracting stamp from image fullrun_mos2_xmm0160761301_pi300-10000_cl_sm2.00.img.gz, (211, 282) - (321, 392)
[Sat Feb 18 15:06:46 2012] XMMSAS bgd. selection expression = annulus(23075.502000, 29255.540000, 1603.200046, 3206.400092, X, Y) && !ellipse(25611.181200, 23883.673000, 2576.136074, 2576.136074, 0.000000, X, Y) && !ellipse(23649.618000, 25159.200000, 1166.344034, 1166.344034, 0.000000, X, Y) && !ellipse(24452.925200, 31383.649000, 474.864014, 474.864014, 0.000000, X, Y) && !ellipse(24482.255554, 26221.721893, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22323.562000, 25790.930000, 1285.040037, 651.968019, 31.909000, X, Y) && !ellipse(24041.460000, 26904.150000, 1665.368048, 1665.368048, 359.900000, X, Y) && !ellipse(23844.146000, 27693.528000, 1180.184034, 1180.184034, 0.000000, X, Y) && !ellipse(23418.034000, 28272.082000, 1459.744042, 1459.744042, 0.000000, X, Y) && !ellipse(23502.650635, 26380.553711, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24869.802216, 26910.449768, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22463.676000, 24319.595600, 2119.928061, 2119.928061, 0.000000, X, Y) && !ellipse(26505.252472, 26814.834198, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24030.708000, 27431.650000, 1188.352034, 1188.352034, 0.000000, X, Y)
[Sat Feb 18 15:06:46 2012] Writing fullrun_mos2_xmm0160761301_pi300-10000_pass1_cl_src25.gif
[Sat Feb 18 15:59:12 2012] Mean detx,y = (38.64, -5726.71) 
[Sat Feb 18 15:59:14 2012] Setting backscal keywords in source and bgd. spectrum
[Sat Feb 18 15:59:47 2012] Binned source spectrum to 10 counts/bin
[Sat Feb 18 15:59:47 2012] Setting source spectrum file to fullrun_mos2_xmm0160761301_pi300-10000_pass1_cl_src25_src_b10.pi.gz
[Sat Feb 18 15:59:47 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0160761301_pi300-10000_pass1_cl_src25_bgd.pi.gz
[Sat Feb 18 21:01:57 2012] Updating aperture counts using extracted products
[Sat Feb 18 21:01:57 2012] Error reading totcts from fullrun_mos2_xmm0160761301_pi300-10000_pass1_cl_src25_src_b10.pi.gz
[Sat Feb 18 21:01:58 2012] Calculating source flux in energy range 0.30-8.00
[Sat Feb 18 21:01:58 2012] Using photon index=1.80, rate=0.00477, arf fullrun_mos2_xmm0160761301_pi300-10000_pass1_cl_src25.arf
[Sat Feb 18 21:01:58 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Feb 18 21:01:58 2012] Updating source flux to 5.7e-14
[Sat Feb 18 21:02:51 2012] Flag c found in src. 25 procflags, skipping spectral fitting