[Fri Feb 17 10:36:38 2012] Detection parameters:
  Position = (162.7, 135.1) = 7 50 15.98 -67 55 15.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 111.2 +/- 17.8
  Background counts = 58.5
  Rate = 0.001 +/- 0.0002

[Fri Feb 17 10:36:38 2012] Off-axis axis estimate = 15.40'
[Fri Feb 17 12:14:32 2012] Using EEF radius (= 14.13 ")to estimate initial spatial extent for simple fitting
[Fri Feb 17 12:14:32 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Feb 17 12:14:32 2012] Initial guess for spatial extent in simple fitting = 14.13"
[Fri Feb 17 12:14:32 2012] source mask rpix=3.2, npix_max = 56, mask sum = 50, frac = 0.890
[Fri Feb 17 12:14:32 2012] Giving source the simple spatial ID 17 for pass 0, mean size = 14.13"
[Fri Feb 17 12:38:08 2012] fullrun_mos1_xmm0160761301_pi300-10000_cl_pass0_src17.ximg exists
[Fri Feb 17 12:38:08 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0160761301_pi300-10000_cl_pass0_src17.csv
[Fri Feb 17 12:38:08 2012] fullrun_mos1_xmm0160761301_pi300-10000_cl_pass0_src17_1.ximg exists
[Fri Feb 17 12:38:08 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0160761301_pi300-10000_cl_pass0_src17.csv
[Fri Feb 17 12:38:08 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0160761301_pi300-10000_cl_pass0_src17_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0160761301_pi300-10000_cl_pass0_src17.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Feb 17 12:38:08 2012] fullrun_mos1_xmm0160761301_pi300-10000_cl_pass0_tfrozen_src17.ximg exists
[Fri Feb 17 12:38:08 2012] fullrun_mos1_xmm0160761301_pi300-10000_cl_pass0_tfrozen_src17_1.ximg exists
[Fri Feb 17 12:38:08 2012] Fit fullrun_mos1_xmm0160761301_pi300-10000_cl_pass0_tfrozen_src17 appears to have run properly
[Fri Feb 17 23:58:38 2012] Spatial fit model total counts = 394.894000, observed total counts = 415.000000
[Fri Feb 17 23:58:38 2012] Offset between fit and detection position for source 21 = 0.017946 pixels
[Fri Feb 17 23:58:38 2012] 428.927300 total counts/ 340.062000 bgd. counts: snr = 4.818958
Spatial fit parameters:
  Offset between fit and detection position for source 21 = 0.017946 pixels
  Position = (162.7, 135.0) = 7 50 15.99 -67 55 13.6
  Extent = 7.2 (5.4-9.8)", rotation angle = 0
  Source counts = 88.9 +/- 20.7
  Background counts = 340.1
  Rate = 0.001 +/- 0.0002
[Fri Feb 17 23:58:38 2012] Vigneting correction estimate = 1.000000
[Fri Feb 17 23:58:38 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Feb 17 23:58:38 2012] Assessing source extent using major axis lower bound
[Fri Feb 17 23:58:38 2012] Source does appear to be extended
[Fri Feb 17 23:58:38 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Feb 18 02:09:52 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat Feb 18 02:09:52 2012] Initial guess for spatial extent in simple fitting = 7.25"
[Sat Feb 18 02:09:52 2012] source mask rpix=1.7, npix_max = 18, mask sum = 16, frac = 0.852
[Sat Feb 18 02:09:52 2012] Giving source the simple spatial ID 17 for pass 1, mean size = 7.25"
[Sat Feb 18 02:35:30 2012] fullrun_mos1_xmm0160761301_pi300-10000_cl_pass1_src17.ximg exists
[Sat Feb 18 02:35:30 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0160761301_pi300-10000_cl_pass1_src17.csv
[Sat Feb 18 02:35:30 2012] fullrun_mos1_xmm0160761301_pi300-10000_cl_pass1_src17_1.ximg exists
[Sat Feb 18 02:35:30 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0160761301_pi300-10000_cl_pass1_src17.csv
[Sat Feb 18 02:35:30 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0160761301_pi300-10000_cl_pass1_src17_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0160761301_pi300-10000_cl_pass1_src17.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Feb 18 02:35:31 2012] fullrun_mos1_xmm0160761301_pi300-10000_cl_pass1_tfrozen_src17.ximg exists
[Sat Feb 18 02:35:31 2012] fullrun_mos1_xmm0160761301_pi300-10000_cl_pass1_tfrozen_src17_1.ximg exists
[Sat Feb 18 02:35:31 2012] Fit fullrun_mos1_xmm0160761301_pi300-10000_cl_pass1_tfrozen_src17 appears to have run properly
[Sat Feb 18 13:04:51 2012] Warning, spatial fit 17 centroid is now closest to src. 8
[Sat Feb 18 13:04:51 2012] Vigneting correction estimate = 1.000000
[Sat Feb 18 13:04:51 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Feb 18 13:04:51 2012] Assessing source extent using major axis lower bound
[Sat Feb 18 13:04:51 2012] Source does appear to be extended
[Sat Feb 18 13:04:51 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Feb 18 14:29:44 2012] XMMSAS src. selection expression = ellipse(14108.356000, 11700.184600, 434.981413, 434.981413, 0.000000, X, Y)
[Sat Feb 18 14:29:44 2012] Writing source region out to fullrun_mos1_xmm0160761301_pi300-10000_pass1_cl_src21_src.reg
[Sat Feb 18 14:29:44 2012] Extracting stamp from image fullrun_mos1_xmm0160761301_pi300-10000_cl_sm2.00.img.gz, (138, 110) - (188, 160)
[Sat Feb 18 14:29:44 2012] XMMSAS bgd. selection expression = annulus(14108.356000, 11700.184600, 724.969021, 1449.938042, X, Y)
[Sat Feb 18 14:29:44 2012] Writing fullrun_mos1_xmm0160761301_pi300-10000_pass1_cl_src21.gif
[Sat Feb 18 14:36:19 2012] Mean detx,y = (6431.00, 15338.07) 
[Sat Feb 18 14:36:21 2012] Setting backscal keywords in source and bgd. spectrum
[Sat Feb 18 14:36:45 2012] Binned source spectrum to 10 counts/bin
[Sat Feb 18 14:36:45 2012] Setting source spectrum file to fullrun_mos1_xmm0160761301_pi300-10000_pass1_cl_src21_src_b10.pi.gz
[Sat Feb 18 14:36:45 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0160761301_pi300-10000_pass1_cl_src21_bgd.pi.gz
[Sat Feb 18 15:06:10 2012] Not generating rmf since there are only 88 counts
[Sat Feb 18 15:06:10 2012] rmf not generated due to insufficient counts
[Sat Feb 18 21:01:56 2012] Updating aperture counts using extracted products
[Sat Feb 18 21:01:56 2012] Error reading totcts from fullrun_mos1_xmm0160761301_pi300-10000_pass1_cl_src21_src_b10.pi.gz
[Sat Feb 18 21:01:56 2012] Calculating source flux in energy range 0.30-8.00
[Sat Feb 18 21:01:56 2012] Using photon index=1.80, rate=0.00105, arf fullrun_mos1_xmm0160761301_pi300-10000_pass1_cl_src21.arf
[Sat Feb 18 21:01:56 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Feb 18 21:01:56 2012] Updating source flux to 3e-14
[Sat Feb 18 21:01:59 2012] Source 21 has fewer than 100.000000 counts, skipping spectral fitting