[Thu Mar 15 00:55:02 2012] Detection parameters:
  Position = (276.2, 275.1) = 7 48 41.33 -67 45 20.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 2712.4 +/- 78.8
  Background counts = 99.1
  Rate = 0.06 +/- 0.002

[Thu Mar 15 00:55:03 2012] Off-axis axis estimate = 2.34'
[Thu Mar 15 01:52:31 2012] Using EEF radius (= 7.60 ")to estimate initial spatial extent for simple fitting
[Thu Mar 15 01:52:31 2012] Initial guess for spatial extent in simple fitting = 7.60"
[Thu Mar 15 01:52:31 2012] source mask rpix=1.7, npix_max = 20, mask sum = 16, frac = 0.793
[Thu Mar 15 01:52:31 2012] Giving source the simple spatial ID 4 for pass 0, mean size = 7.60"
[Thu Mar 15 06:24:14 2012] fullrun_mos2_xmm0160760601_pi300-10000_cl_pass0_src4.ximg exists
[Thu Mar 15 06:24:14 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0160760601_pi300-10000_cl_pass0_src4.csv
[Thu Mar 15 06:24:14 2012] fullrun_mos2_xmm0160760601_pi300-10000_cl_pass0_src4_1.ximg exists
[Thu Mar 15 06:24:14 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0160760601_pi300-10000_cl_pass0_src4.csv
[Thu Mar 15 06:24:14 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0160760601_pi300-10000_cl_pass0_src4_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0160760601_pi300-10000_cl_pass0_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Mar 15 06:24:15 2012] fullrun_mos2_xmm0160760601_pi300-10000_cl_pass0_tfrozen_src4.ximg exists
[Thu Mar 15 06:24:15 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0160760601_pi300-10000_cl_pass0_tfrozen_src4.csv
[Thu Mar 15 06:24:15 2012] fullrun_mos2_xmm0160760601_pi300-10000_cl_pass0_tfrozen_src4_1.ximg exists
[Thu Mar 15 06:24:15 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0160760601_pi300-10000_cl_pass0_tfrozen_src4.csv
[Thu Mar 15 06:24:15 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0160760601_pi300-10000_cl_pass0_tfrozen_src4_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0160760601_pi300-10000_cl_pass0_tfrozen_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Mar 15 06:24:29 2012] Warning, spatial fit 4 centroid is now closest to src. 1
[Thu Mar 15 06:24:29 2012] Vigneting correction estimate = 1.000000
[Thu Mar 15 06:24:29 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Mar 15 06:24:29 2012] Assessing source extent using major
[Thu Mar 15 06:24:29 2012] Source does appear to be extended
[Thu Mar 15 06:24:29 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Mar 15 06:24:29 2012] Source is confused with source 1
[Thu Mar 15 06:58:10 2012] Using EEF radius (= 7.60 ")to estimate initial spatial extent for simple fitting
[Thu Mar 15 06:58:10 2012] Initial guess for spatial extent in simple fitting = 7.60"
[Thu Mar 15 06:58:10 2012] source mask rpix=1.7, npix_max = 20, mask sum = 16, frac = 0.793
[Thu Mar 15 06:58:10 2012] Giving source the simple spatial ID 4 for pass 1, mean size = 7.60"
[Thu Mar 15 11:47:51 2012] fullrun_mos2_xmm0160760601_pi300-10000_cl_pass1_src4.ximg exists
[Thu Mar 15 11:47:51 2012] fullrun_mos2_xmm0160760601_pi300-10000_cl_pass1_src4_1.ximg exists
[Thu Mar 15 11:47:51 2012] Fit fullrun_mos2_xmm0160760601_pi300-10000_cl_pass1_src4 appears to have run properly
[Thu Mar 15 11:47:51 2012] fullrun_mos2_xmm0160760601_pi300-10000_cl_pass1_tfrozen_src4.ximg exists
[Thu Mar 15 11:47:51 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0160760601_pi300-10000_cl_pass1_tfrozen_src4.csv
[Thu Mar 15 11:47:51 2012] fullrun_mos2_xmm0160760601_pi300-10000_cl_pass1_tfrozen_src4_1.ximg exists
[Thu Mar 15 11:47:51 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0160760601_pi300-10000_cl_pass1_tfrozen_src4.csv
[Thu Mar 15 11:47:51 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0160760601_pi300-10000_cl_pass1_tfrozen_src4_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0160760601_pi300-10000_cl_pass1_tfrozen_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Mar 15 11:48:10 2012] Warning, spatial fit 4 centroid is now closest to src. 4
[Thu Mar 15 11:48:10 2012] Source 3 is offset by 5.834069 and -0.922983 pixels which is larger than
2 X fitted extent = 5.021425 x 5.393196, not incorporating fit results
[Thu Mar 15 11:48:10 2012] Vigneting correction estimate = 1.000000
[Thu Mar 15 11:48:10 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Mar 15 11:48:10 2012] Assessing source extent using major
[Thu Mar 15 11:48:10 2012] Source does appear to be extended
[Thu Mar 15 11:48:10 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Mar 15 13:22:05 2012] Counts = 2712.403809, rescaling region sizes by 2.000000
[Thu Mar 15 13:22:05 2012] XMMSAS src. selection expression = ellipse(23984.480042, 23884.446503, 1305.000000, 1305.000000, 0.000000, X, Y)
[Thu Mar 15 13:22:05 2012] Writing source region out to fullrun_mos2_xmm0160760601_pi300-10000_pass1_cl_src3_src.reg
[Thu Mar 15 13:22:05 2012] Extracting stamp from image fullrun_mos2_xmm0160760601_pi300-10000_cl_sm2.00.img.gz, (201, 200) - (351, 350)
[Thu Mar 15 13:22:05 2012] XMMSAS bgd. selection expression = annulus(23984.480042, 23884.446503, 4350.000000, 8700.000000, X, Y) && !ellipse(24853.914000, 24136.976800, 2543.472073, 2543.472073, 0.000000, X, Y) && !ellipse(23911.219818, 24308.268829, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24004.201599, 24657.768921, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23448.398000, 23362.278000, 3646.224105, 3646.224105, 0.000000, X, Y) && !ellipse(23887.475891, 25453.170563, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26444.924896, 23965.828461, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24042.707489, 22721.063110, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27120.362000, 23812.830000, 898.400026, 277.978408, 4.685547, X, Y) && !ellipse(23724.340271, 31635.772675, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25120.675934, 18564.924057, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26912.499451, 22926.461487, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24230.752600, 16475.891200, 1183.968034, 425.862412, 33.874845, X, Y) && !ellipse(25104.079346, 19179.214203, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24654.232540, 28901.916200, 1234.224036, 662.378419, 86.696740, X, Y) && !ellipse(24924.853800, 27571.144000, 1125.288032, 1125.288032, 0.000000, X, Y) && !ellipse(25080.617540, 19988.292000, 831.912024, 831.912024, 0.000000, X, Y) && !ellipse(24587.713400, 29874.467800, 866.544025, 866.544025, 0.000000, X, Y) && !ellipse(26089.843933, 30617.823822, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27683.690000, 23563.522000, 1176.376034, 1176.376034, 0.000000, X, Y) && !ellipse(24680.491800, 28402.786400, 1193.680034, 728.124021, 81.073000, X, Y) && !ellipse(26021.664600, 26123.062000, 1074.880031, 406.449612, 99.008750, X, Y)
[Thu Mar 15 13:22:05 2012] Writing fullrun_mos2_xmm0160760601_pi300-10000_pass1_cl_src3.gif
[Thu Mar 15 13:43:13 2012] Mean detx,y = (-58.32, 115.54) 
[Thu Mar 15 13:43:19 2012] Setting backscal keywords in source and bgd. spectrum
[Thu Mar 15 13:46:43 2012] Binned source spectrum to 10 counts/bin
[Thu Mar 15 13:46:44 2012] Setting source spectrum file to fullrun_mos2_xmm0160760601_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Thu Mar 15 13:46:44 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0160760601_pi300-10000_pass1_cl_src3_bgd.pi.gz
[Thu Mar 15 14:22:05 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Thu Mar 15 14:22:05 2012] rmf not generated due to insufficient counts
[Thu Mar 15 16:26:46 2012] Updating aperture counts using extracted products
[Thu Mar 15 16:26:46 2012] Error reading totcts from fullrun_mos2_xmm0160760601_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Thu Mar 15 16:26:48 2012] Calculating source flux in energy range 0.30-8.00
[Thu Mar 15 16:26:48 2012] Using photon index=1.80, rate=0.0554, arf fullrun_mos2_xmm0160760601_pi300-10000_pass1_cl_src3.arf
[Thu Mar 15 16:26:48 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Mar 15 16:26:48 2012] Updating source flux to 5.3e-13
[Thu Mar 15 16:27:38 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting