[Sat Jun 22 01:03:25 2013] Detection parameters:
  Position = (261.3, 252.0) = 7 48 46.62 -67 47 40.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 212.2 +/- 31.8
  Background counts = 277.3
  Rate = 0.002 +/- 0.0004

[Sat Jun 22 01:03:25 2013] Off-axis axis estimate = 4.31'
[Sat Jun 22 04:30:54 2013] Using EEF radius (= 8.58 ")to estimate initial spatial extent for simple fitting
[Sat Jun 22 04:30:54 2013] Initial guess for spatial extent in simple fitting = 8.58"
[Sat Jun 22 04:30:54 2013] source mask rpix=2.0, npix_max = 24, mask sum = 25, frac = 1.022
[Sat Jun 22 04:30:54 2013] Giving source the simple spatial ID 31 for pass 0, mean size = 8.58"
[Sat Jun 22 12:42:10 2013] fullrun_mos2_xmm0160760301_pi300-10000_cl_pass0_src31.ximg exists
[Sat Jun 22 12:42:10 2013] fullrun_mos2_xmm0160760301_pi300-10000_cl_pass0_src31_1.ximg exists
[Sat Jun 22 12:42:10 2013] Fit fullrun_mos2_xmm0160760301_pi300-10000_cl_pass0_src31 appears to have run properly
[Sat Jun 22 12:42:12 2013] fullrun_mos2_xmm0160760301_pi300-10000_cl_pass0_tfrozen_src31.ximg exists
[Sat Jun 22 12:42:12 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0160760301_pi300-10000_cl_pass0_tfrozen_src31.csv
[Sat Jun 22 12:42:12 2013] fullrun_mos2_xmm0160760301_pi300-10000_cl_pass0_tfrozen_src31_1.ximg exists
[Sat Jun 22 12:42:12 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0160760301_pi300-10000_cl_pass0_tfrozen_src31.csv
[Sat Jun 22 12:42:12 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0160760301_pi300-10000_cl_pass0_tfrozen_src31_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0160760301_pi300-10000_cl_pass0_tfrozen_src31.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 22 12:42:38 2013] Warning, spatial fit 31 centroid is now closest to src. 58
[Sat Jun 22 12:42:38 2013] Spatial fit model total counts = 2397.050000, observed total counts = 2129.000000
[Sat Jun 22 12:42:38 2013] Poor agreement between spatial fit and data for source 60
It may help to tweak spatial fit manually
Not incorporating fit results
[Sat Jun 22 12:42:38 2013] Vigneting correction estimate = 1.000000
[Sat Jun 22 12:42:38 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun 22 12:42:38 2013] Assessing source extent using major
[Sat Jun 22 12:42:38 2013] Source does appear to be extended
[Sat Jun 22 12:42:38 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun 22 12:42:38 2013] Source is confused with source 34
[Sat Jun 22 12:42:38 2013] Source is confused with source 58
[Sat Jun 22 13:49:56 2013] Using EEF radius (= 8.58 ")to estimate initial spatial extent for simple fitting
[Sat Jun 22 13:49:56 2013] Initial guess for spatial extent in simple fitting = 8.58"
[Sat Jun 22 13:49:56 2013] source mask rpix=2.0, npix_max = 24, mask sum = 25, frac = 1.022
[Sat Jun 22 13:49:56 2013] Giving source the simple spatial ID 31 for pass 1, mean size = 8.58"
[Sat Jun 22 20:42:53 2013] fullrun_mos2_xmm0160760301_pi300-10000_cl_pass1_src31.ximg exists
[Sat Jun 22 20:42:53 2013] fullrun_mos2_xmm0160760301_pi300-10000_cl_pass1_src31_1.ximg exists
[Sat Jun 22 20:42:53 2013] Fit fullrun_mos2_xmm0160760301_pi300-10000_cl_pass1_src31 appears to have run properly
[Sat Jun 22 20:42:54 2013] fullrun_mos2_xmm0160760301_pi300-10000_cl_pass1_tfrozen_src31.ximg exists
[Sat Jun 22 20:42:54 2013] fullrun_mos2_xmm0160760301_pi300-10000_cl_pass1_tfrozen_src31_1.ximg exists
[Sat Jun 22 20:42:54 2013] Fit fullrun_mos2_xmm0160760301_pi300-10000_cl_pass1_tfrozen_src31 appears to have run properly
[Sat Jun 22 20:43:10 2013] Source 60 is offset by -5.029080 and 0.632755 pixels which is larger than
2 X fitted extent = 1.292083 x 1.292083, not incorporating fit results
[Sat Jun 22 20:43:10 2013] Warning: source 23 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 60 at 11.522649 pixels away
[Sat Jun 22 20:43:10 2013] Warning, spatial fit 31 centroid is now closest to src. 58
[Sat Jun 22 20:43:10 2013] Warning: source 34 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 60 at 13.215513 pixels away
[Sat Jun 22 20:43:10 2013] Vigneting correction estimate = 1.000000
[Sat Jun 22 20:43:10 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun 22 20:43:10 2013] Assessing source extent using major
[Sat Jun 22 20:43:10 2013] Source does appear to be extended
[Sat Jun 22 20:43:10 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun 22 21:52:46 2013] XMMSAS src. selection expression = ellipse(22685.260040, 21872.839661, 652.500000, 652.500000, 0.000000, X, Y)
[Sat Jun 22 21:52:46 2013] Writing source region out to fullrun_mos2_xmm0160760301_pi300-10000_pass1_cl_src60_src.reg
[Sat Jun 22 21:52:46 2013] Extracting stamp from image fullrun_mos2_xmm0160760301_pi300-10000_cl_sm2.00.img.gz, (224, 214) - (299, 289)
[Sat Jun 22 21:52:46 2013] XMMSAS bgd. selection expression = annulus(22685.260040, 21872.839661, 1087.500000, 2175.000000, X, Y) && !ellipse(24158.496600, 24818.523540, 3141.696090, 2913.624084, 26.627400, X, Y) && !ellipse(22770.238000, 24581.553200, 1236.504036, 268.957608, 352.786000, X, Y) && !ellipse(22617.450592, 20307.559174, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22828.188232, 23962.384888, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25321.497040, 22827.917419, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21800.975983, 19797.141739, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22284.904800, 20868.127000, 1439.936041, 358.644010, 117.370800, X, Y) && !ellipse(21985.550964, 20218.593124, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21903.040000, 24454.326600, 1339.536039, 299.969609, 349.209298, X, Y) && !ellipse(22380.786200, 21075.476000, 1412.296041, 416.160812, 116.968000, X, Y) && !ellipse(22877.436000, 22144.007600, 1373.552040, 405.845612, 114.674800, X, Y) && !ellipse(24920.279633, 22193.073364, 1740.000000, 1740.000000, 0.000000, X, Y) && !ellipse(25694.934000, 22379.803700, 1269.192037, 313.050409, 66.273600, X, Y)
[Sat Jun 22 21:52:46 2013] Writing fullrun_mos2_xmm0160760301_pi300-10000_pass1_cl_src60.gif
[Sat Jun 22 22:41:45 2013] Mean detx,y = (59.24, 3400.97) 
[Sat Jun 22 22:41:46 2013] Setting backscal keywords in source and bgd. spectrum
[Sat Jun 22 22:41:57 2013] Binned source spectrum to 10 counts/bin
[Sat Jun 22 22:41:57 2013] Setting source spectrum file to fullrun_mos2_xmm0160760301_pi300-10000_pass1_cl_src60_src_b10.pi.gz
[Sat Jun 22 22:41:57 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0160760301_pi300-10000_pass1_cl_src60_bgd.pi.gz
[Sat Jun 22 23:37:10 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sat Jun 22 23:37:10 2013] rmf not generated due to insufficient counts
[Sun Jun 23 00:17:15 2013] Updating aperture counts using extracted products
[Sun Jun 23 00:17:15 2013] Total counts from fullrun_mos2_xmm0160760301_pi300-10000_pass1_cl_src60_src_b10.pi.gz = 1236.00
[Sun Jun 23 00:17:15 2013] Total counts from fullrun_mos2_xmm0160760301_pi300-10000_pass1_cl_src60_bgd.pi.gz = 1580.00
[Sun Jun 23 00:17:15 2013] Got source and background scale factors 1206032.000000, 3233632.000000
[Sun Jun 23 00:17:16 2013] User source parameters:
  Position = (261.3, 252.0) = 7 48 46.62 -67 47 40.8
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 646.7 +/- 36.2
  Background aperture counts = 589.3
  Rate = 0.009 +/- 0.0005

[Sun Jun 23 00:17:16 2013] Updating counts from extracted products
[Sun Jun 23 00:17:16 2013] Set source signif. to 646.72/24.28 = 26.64
[Sun Jun 23 00:17:21 2013] Calculating source flux in energy range 0.30-8.00
[Sun Jun 23 00:17:21 2013] Using photon index=1.80, rate=0.00853, arf fullrun_mos2_xmm0160760301_pi300-10000_pass1_cl_src60.arf
[Sun Jun 23 00:17:21 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Jun 23 00:17:21 2013] Updating source flux to 1.2e-13
[Sun Jun 23 00:17:26 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Sun Jun 23 00:17:40 2013] xmm0160760301/analysis//spectral/fullrun_mos2_xmm0160760301_pi300-10000_pass1_cl_src60_pl.csv not found, spectral fit skipped or did not complete