[Sat Jun 22 01:03:24 2013] Detection parameters:
  Position = (292.7, 361.5) = 7 48 22.51 -67 39 34.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 197.9 +/- 21.6
  Background counts = 261.8
  Rate = 0.003 +/- 0.0003

[Sat Jun 22 01:03:25 2013] Off-axis axis estimate = 4.59'
[Sat Jun 22 04:30:54 2013] Using EEF radius (= 8.72 ")to estimate initial spatial extent for simple fitting
[Sat Jun 22 04:30:54 2013] Initial guess for spatial extent in simple fitting = 8.72"
[Sat Jun 22 04:30:54 2013] source mask rpix=2.0, npix_max = 25, mask sum = 23, frac = 0.916
[Sat Jun 22 04:30:54 2013] Giving source the simple spatial ID 28 for pass 0, mean size = 8.72"
[Sat Jun 22 12:42:10 2013] fullrun_mos2_xmm0160760301_pi300-10000_cl_pass0_src28.ximg exists
[Sat Jun 22 12:42:10 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0160760301_pi300-10000_cl_pass0_src28.csv
[Sat Jun 22 12:42:10 2013] fullrun_mos2_xmm0160760301_pi300-10000_cl_pass0_src28_1.ximg exists
[Sat Jun 22 12:42:10 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0160760301_pi300-10000_cl_pass0_src28.csv
[Sat Jun 22 12:42:10 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0160760301_pi300-10000_cl_pass0_src28_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0160760301_pi300-10000_cl_pass0_src28.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 22 12:42:12 2013] fullrun_mos2_xmm0160760301_pi300-10000_cl_pass0_tfrozen_src28.ximg exists
[Sat Jun 22 12:42:12 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0160760301_pi300-10000_cl_pass0_tfrozen_src28.csv
[Sat Jun 22 12:42:12 2013] fullrun_mos2_xmm0160760301_pi300-10000_cl_pass0_tfrozen_src28_1.ximg exists
[Sat Jun 22 12:42:12 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0160760301_pi300-10000_cl_pass0_tfrozen_src28.csv
[Sat Jun 22 12:42:12 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0160760301_pi300-10000_cl_pass0_tfrozen_src28_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0160760301_pi300-10000_cl_pass0_tfrozen_src28.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 22 12:42:38 2013] Warning: source 28 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 48 at 12.203888 pixels away
[Sat Jun 22 12:42:38 2013] Vigneting correction estimate = 1.000000
[Sat Jun 22 12:42:38 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun 22 12:42:38 2013] Assessing source extent using major
[Sat Jun 22 12:42:38 2013] Source does appear to be extended
[Sat Jun 22 12:42:38 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun 22 13:49:56 2013] Using EEF radius (= 8.72 ")to estimate initial spatial extent for simple fitting
[Sat Jun 22 13:49:56 2013] Initial guess for spatial extent in simple fitting = 8.72"
[Sat Jun 22 13:49:56 2013] source mask rpix=2.0, npix_max = 25, mask sum = 23, frac = 0.916
[Sat Jun 22 13:49:56 2013] Giving source the simple spatial ID 28 for pass 1, mean size = 8.72"
[Sat Jun 22 20:42:53 2013] fullrun_mos2_xmm0160760301_pi300-10000_cl_pass1_src28.ximg exists
[Sat Jun 22 20:42:53 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0160760301_pi300-10000_cl_pass1_src28.csv
[Sat Jun 22 20:42:53 2013] fullrun_mos2_xmm0160760301_pi300-10000_cl_pass1_src28_1.ximg exists
[Sat Jun 22 20:42:53 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0160760301_pi300-10000_cl_pass1_src28.csv
[Sat Jun 22 20:42:53 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0160760301_pi300-10000_cl_pass1_src28_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0160760301_pi300-10000_cl_pass1_src28.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 22 20:42:54 2013] fullrun_mos2_xmm0160760301_pi300-10000_cl_pass1_tfrozen_src28.ximg exists
[Sat Jun 22 20:42:54 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0160760301_pi300-10000_cl_pass1_tfrozen_src28.csv
[Sat Jun 22 20:42:54 2013] fullrun_mos2_xmm0160760301_pi300-10000_cl_pass1_tfrozen_src28_1.ximg exists
[Sat Jun 22 20:42:54 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0160760301_pi300-10000_cl_pass1_tfrozen_src28.csv
[Sat Jun 22 20:42:54 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0160760301_pi300-10000_cl_pass1_tfrozen_src28_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0160760301_pi300-10000_cl_pass1_tfrozen_src28.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 22 20:43:10 2013] Source 48 is offset by -3.462451 and -0.376325 pixels which is larger than
2 X fitted extent = 1.418639 x 1.418639, not incorporating fit results
[Sat Jun 22 20:43:10 2013] Warning: source 28 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 48 at 12.203888 pixels away
[Sat Jun 22 20:43:10 2013] Vigneting correction estimate = 1.000000
[Sat Jun 22 20:43:10 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun 22 20:43:10 2013] Assessing source extent using major
[Sat Jun 22 20:43:10 2013] Source does appear to be extended
[Sat Jun 22 20:43:10 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun 22 21:52:46 2013] XMMSAS src. selection expression = ellipse(25415.394806, 31399.631714, 652.500000, 652.500000, 0.000000, X, Y)
[Sat Jun 22 21:52:46 2013] Writing source region out to fullrun_mos2_xmm0160760301_pi300-10000_pass1_cl_src48_src.reg
[Sat Jun 22 21:52:46 2013] Extracting stamp from image fullrun_mos2_xmm0160760301_pi300-10000_cl_sm2.00.img.gz, (255, 324) - (330, 399)
[Sat Jun 22 21:52:46 2013] XMMSAS bgd. selection expression = annulus(25415.394806, 31399.631714, 1087.500000, 2175.000000, X, Y) && !ellipse(23023.659454, 32324.304077, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24570.986000, 28194.318000, 1154.904033, 729.187221, 0.994336, X, Y) && !ellipse(26173.674000, 29278.570000, 1278.784037, 768.392822, 304.656000, X, Y) && !ellipse(26780.851200, 30372.016200, 1322.152038, 652.592819, 112.966000, X, Y) && !ellipse(26451.926208, 29630.155579, 870.000000, 870.000000, 0.000000, X, Y)
[Sat Jun 22 21:52:46 2013] Writing fullrun_mos2_xmm0160760301_pi300-10000_pass1_cl_src48.gif
[Sat Jun 22 22:40:23 2013] Mean detx,y = (-1655.62, -6235.59) 
[Sat Jun 22 22:40:24 2013] Setting backscal keywords in source and bgd. spectrum
[Sat Jun 22 22:40:43 2013] Binned source spectrum to 10 counts/bin
[Sat Jun 22 22:40:44 2013] Setting source spectrum file to fullrun_mos2_xmm0160760301_pi300-10000_pass1_cl_src48_src_b10.pi.gz
[Sat Jun 22 22:40:44 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0160760301_pi300-10000_pass1_cl_src48_bgd.pi.gz
[Sat Jun 22 23:36:45 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sat Jun 22 23:36:45 2013] rmf not generated due to insufficient counts
[Sun Jun 23 00:17:15 2013] Updating aperture counts using extracted products
[Sun Jun 23 00:17:15 2013] Total counts from fullrun_mos2_xmm0160760301_pi300-10000_pass1_cl_src48_src_b10.pi.gz = 652.00
[Sun Jun 23 00:17:15 2013] Total counts from fullrun_mos2_xmm0160760301_pi300-10000_pass1_cl_src48_bgd.pi.gz = 3164.00
[Sun Jun 23 00:17:15 2013] Got source and background scale factors 1069850.000000, 7182873.000000
[Sun Jun 23 00:17:15 2013] User source parameters:
  Position = (292.7, 361.5) = 7 48 22.51 -67 39 34.1
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 180.7 +/- 26.5
  Background aperture counts = 471.3
  Rate = 0.002 +/- 0.0004

[Sun Jun 23 00:17:15 2013] Updating counts from extracted products
[Sun Jun 23 00:17:15 2013] Set source signif. to 180.74/21.71 = 8.33
[Sun Jun 23 00:17:21 2013] Calculating source flux in energy range 0.30-8.00
[Sun Jun 23 00:17:21 2013] Using photon index=1.80, rate=0.00238, arf fullrun_mos2_xmm0160760301_pi300-10000_pass1_cl_src48.arf
[Sun Jun 23 00:17:21 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Jun 23 00:17:21 2013] Updating source flux to 3.9e-14
[Sun Jun 23 00:17:26 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Sun Jun 23 00:17:40 2013] xmm0160760301/analysis//spectral/fullrun_mos2_xmm0160760301_pi300-10000_pass1_cl_src48_pl.csv not found, spectral fit skipped or did not complete