[Mon May 20 00:50:45 2013] Detection parameters:
  Position = (264.1, 260.2) = 7 48 44.48 -67 47 2.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 100.1 +/- 22.9
  Background counts = 136.1
  Rate = 0.001 +/- 0.0003

[Mon May 20 00:50:47 2013] Off-axis axis estimate = 3.73'
[Mon May 20 00:51:26 2013] Using EEF radius (= 8.29 ")to estimate initial spatial extent for simple fitting
[Mon May 20 00:51:26 2013] Initial guess for spatial extent in simple fitting = 8.29"
[Mon May 20 00:51:26 2013] source mask rpix=1.9, npix_max = 23, mask sum = 20, frac = 0.864
[Mon May 20 00:51:26 2013] Giving source the simple spatial ID 43 for pass 0, mean size = 8.29"
[Mon May 20 00:51:28 2013] fullrun_mos2_xmm0160760201_pi300-10000_cl_pass0_src43.ximg exists
[Mon May 20 00:51:28 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0160760201_pi300-10000_cl_pass0_src43.csv
[Mon May 20 00:51:28 2013] fullrun_mos2_xmm0160760201_pi300-10000_cl_pass0_src43_1.ximg exists
[Mon May 20 00:51:28 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0160760201_pi300-10000_cl_pass0_src43.csv
[Mon May 20 00:51:28 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0160760201_pi300-10000_cl_pass0_src43_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0160760201_pi300-10000_cl_pass0_src43.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 20 00:51:29 2013] fullrun_mos2_xmm0160760201_pi300-10000_cl_pass0_tfrozen_src43.ximg exists
[Mon May 20 00:51:29 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0160760201_pi300-10000_cl_pass0_tfrozen_src43.csv
[Mon May 20 00:51:29 2013] fullrun_mos2_xmm0160760201_pi300-10000_cl_pass0_tfrozen_src43_1.ximg exists
[Mon May 20 00:51:29 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0160760201_pi300-10000_cl_pass0_tfrozen_src43.csv
[Mon May 20 00:51:29 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0160760201_pi300-10000_cl_pass0_tfrozen_src43_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0160760201_pi300-10000_cl_pass0_tfrozen_src43.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 20 00:51:58 2013] Spatial fit model total counts = 1893.600000, observed total counts = 1724.000000
[Mon May 20 00:51:58 2013] Offset between fit and detection position for source 47 = 1.025907 pixels
[Mon May 20 00:51:58 2013] Warning, changing simple spatial fit ID from 43 to 29
[Mon May 20 00:51:58 2013] 1842.697000 total counts/ 1416.690000 bgd. counts: snr = 11.318251
Spatial fit parameters:
  Offset between fit and detection position for source 47 = 1.025907 pixels
  Position = (263.2, 260.8) = 7 48 45.12 -67 47 0.4
  Extent = 17.1 (14.1-34.1)", rotation angle = 0
  Source counts = 426.0 +/- 42.9
  Background counts = 1416.7
  Rate = 0.005 +/- 0.0005
[Mon May 20 00:51:58 2013] Vigneting correction estimate = 1.000000
[Mon May 20 00:51:58 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon May 20 00:51:58 2013] Assessing source extent using major axis lower bound
[Mon May 20 00:51:58 2013] Source does appear to be extended
[Mon May 20 00:51:58 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon May 20 00:51:58 2013] Source is confused with source 49
[Mon May 20 00:52:19 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Mon May 20 00:52:19 2013] Initial guess for spatial extent in simple fitting = 17.06"
[Mon May 20 00:52:19 2013] source mask rpix=3.9, npix_max = 78, mask sum = 77, frac = 0.985
[Mon May 20 00:52:19 2013] Giving source the simple spatial ID 39 for pass 1, mean size = 17.06"
[Mon May 20 00:52:22 2013] fullrun_mos2_xmm0160760201_pi300-10000_cl_pass1_src39.ximg exists
[Mon May 20 00:52:22 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0160760201_pi300-10000_cl_pass1_src39.csv
[Mon May 20 00:52:22 2013] fullrun_mos2_xmm0160760201_pi300-10000_cl_pass1_src39_1.ximg exists
[Mon May 20 00:52:22 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0160760201_pi300-10000_cl_pass1_src39.csv
[Mon May 20 00:52:22 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0160760201_pi300-10000_cl_pass1_src39_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0160760201_pi300-10000_cl_pass1_src39.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 20 00:52:22 2013] fullrun_mos2_xmm0160760201_pi300-10000_cl_pass1_tfrozen_src39.ximg exists
[Mon May 20 00:52:22 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0160760201_pi300-10000_cl_pass1_tfrozen_src39.csv
[Mon May 20 00:52:22 2013] fullrun_mos2_xmm0160760201_pi300-10000_cl_pass1_tfrozen_src39_1.ximg exists
[Mon May 20 00:52:22 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0160760201_pi300-10000_cl_pass1_tfrozen_src39.csv
[Mon May 20 00:52:22 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0160760201_pi300-10000_cl_pass1_tfrozen_src39_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0160760201_pi300-10000_cl_pass1_tfrozen_src39.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 20 00:52:46 2013] Source 47 is offset by 2.284345 and 1.826874 pixels which is larger than
2 X fitted extent = 2.006690 x 2.006690, not incorporating fit results
[Mon May 20 00:52:46 2013] Warning, spatial fit 39 centroid is now closest to src. 53
[Mon May 20 00:52:46 2013] Vigneting correction estimate = 1.000000
[Mon May 20 00:52:46 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon May 20 00:52:46 2013] Assessing source extent using major axis lower bound
[Mon May 20 00:52:46 2013] Source does appear to be extended
[Mon May 20 00:52:46 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon May 20 01:28:22 2013] XMMSAS src. selection expression = ellipse(22853.634000, 22639.700000, 1023.408029, 1023.408029, 0.000000, X, Y)
[Mon May 20 01:28:22 2013] Not overwriting source region fullrun_mos2_xmm0160760201_pi300-10000_pass1_cl_src47_src.reg
[Mon May 20 01:28:22 2013] Extracting stamp from image fullrun_mos2_xmm0160760201_pi300-10000_cl_sm2.00.img.gz, (204, 202) - (322, 320)
[Mon May 20 01:28:22 2013] XMMSAS bgd. selection expression = annulus(22853.634000, 22639.700000, 1705.680049, 3411.360098, X, Y) && !ellipse(24168.608200, 24891.201000, 2894.784083, 2894.784083, 0.000000, X, Y) && !ellipse(23239.294000, 25633.506000, 278.708008, 278.708008, 0.000000, X, Y) && !ellipse(23679.642853, 25970.954376, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23224.130096, 25198.019592, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23030.238617, 24778.386902, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23991.693756, 26579.818970, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22660.185944, 24040.333893, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25678.694061, 23678.084351, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25232.797821, 22900.065186, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27091.028931, 24204.778442, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21735.301600, 20231.161300, 1503.368043, 351.024810, 117.147000, X, Y) && !ellipse(18816.442947, 19251.356659, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21380.736618, 19570.696945, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25116.708000, 27069.890000, 2376.752068, 2376.752068, 0.000000, X, Y) && !ellipse(22154.480000, 21082.800000, 1396.656040, 1396.656040, 0.000000, X, Y) && !ellipse(22428.086000, 21531.876000, 1260.536036, 1260.536036, 0.000000, X, Y) && !ellipse(22548.956400, 21795.582000, 1324.640038, 381.873611, 114.522900, X, Y) && !ellipse(21435.702000, 26890.198000, 1366.736039, 1366.736039, 0.000000, X, Y)
[Mon May 20 01:28:22 2013] Writing fullrun_mos2_xmm0160760201_pi300-10000_pass1_cl_src47.gif
[Mon May 20 01:28:26 2013] ../../xmm0160760201/products/events/fullrun_mos2_xmm0160760201_pi300-10000_pass1_cl_src47_src.evt and ../../xmm0160760201/products/events/fullrun_mos2_xmm0160760201_pi300-10000_pass1_cl_src47_bgd.evt exist, delete to re-create
[Mon May 20 01:28:26 2013] Mean detx,y = (41.37, 2443.34) 
[Mon May 20 01:28:26 2013] ../../xmm0160760201/products/images/fullrun_mos2_xmm0160760201_pi300-10000_pass1_cl_src47_src.img and ../../xmm0160760201/products/images/fullrun_mos2_xmm0160760201_pi300-10000_pass1_cl_src47_bgd.img exist, delete to re-create
[Mon May 20 01:28:26 2013] ../../xmm0160760201/products/spectra/fullrun_mos2_xmm0160760201_pi300-10000_pass1_cl_src47_src_b10.pi.gz and ../../xmm0160760201/products/spectra/fullrun_mos2_xmm0160760201_pi300-10000_pass1_cl_src47_bgd.pi exist, delete to re-create
[Mon May 20 01:28:26 2013] Setting source spectrum file to fullrun_mos2_xmm0160760201_pi300-10000_pass1_cl_src47_src_b10.pi.gz
[Mon May 20 01:28:26 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0160760201_pi300-10000_pass1_cl_src47_bgd.pi.gz
[Mon May 20 01:28:26 2013] ../../xmm0160760201/products/lightcurves/fullrun_mos2_xmm0160760201_pi300-10000_pass1_cl_src47_src.lc and ../../xmm0160760201/products/lightcurves/fullrun_mos2_xmm0160760201_pi300-10000_pass1_cl_src47_bgd.lc exist, delete to re-create
[Mon May 20 01:28:36 2013] fullrun_mos2_xmm0160760201_pi300-10000_pass1_cl_src47.rmf exists, delete to re-create
[Mon May 20 01:28:36 2013] fullrun_mos2_xmm0160760201_pi300-10000_pass1_cl_src47.arf exists, delete to re-create
[Mon May 20 01:30:48 2013] Updating aperture counts using extracted products
[Mon May 20 01:30:48 2013] Total counts from fullrun_mos2_xmm0160760201_pi300-10000_pass1_cl_src47_src_b10.pi.gz = 4625.00
[Mon May 20 01:30:49 2013] Total counts from fullrun_mos2_xmm0160760201_pi300-10000_pass1_cl_src47_bgd.pi.gz = 6382.00
[Mon May 20 01:30:49 2013] Got source and background scale factors 2981440.000000, 12520848.000000
[Mon May 20 01:30:49 2013] User source parameters:
  Position = (263.2, 260.8) = 7 48 45.12 -67 47 0.4
  Extent = 17.1 (14.1-34.1)", rotation angle = 0
  Source aperture counts = 3105.3 +/- 69.0
  Background aperture counts = 1519.7
  Rate = 0.04 +/- 0.0008

[Mon May 20 01:30:51 2013] Calculating source flux in energy range 0.30-8.00
[Mon May 20 01:30:51 2013] Using photon index=1.80, rate=0.00501, arf fullrun_mos2_xmm0160760201_pi300-10000_pass1_cl_src47.arf
[Mon May 20 01:30:51 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Mon May 20 01:30:51 2013] Updating source flux to 5.5e-14
[Mon May 20 01:30:59 2013] Flag b found in src. 47 procflags, skipping spectral fitting
[Mon May 20 01:30:59 2013] Flag c found in src. 47 procflags, skipping spectral fitting
[Mon May 20 01:31:34 2013] xmm0160760201/analysis//spectral/fullrun_mos2_xmm0160760201_pi300-10000_pass1_cl_src47_pl.csv not found, spectral fit skipped or did not complete