[Mon May 20 00:50:43 2013] Detection parameters:
  Position = (290.5, 321.7) = 7 48 24.17 -67 42 31.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 204.2 +/- 25.2
  Background counts = 161.5
  Rate = 0.003 +/- 0.0003

[Mon May 20 00:50:47 2013] Off-axis axis estimate = 1.78'
[Mon May 20 00:51:26 2013] Using EEF radius (= 7.32 ")to estimate initial spatial extent for simple fitting
[Mon May 20 00:51:26 2013] Initial guess for spatial extent in simple fitting = 7.32"
[Mon May 20 00:51:26 2013] source mask rpix=1.7, npix_max = 19, mask sum = 12, frac = 0.630
[Mon May 20 00:51:26 2013] Giving source the simple spatial ID 28 for pass 0, mean size = 7.32"
[Mon May 20 00:51:28 2013] fullrun_mos2_xmm0160760201_pi300-10000_cl_pass0_src28.ximg exists
[Mon May 20 00:51:28 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0160760201_pi300-10000_cl_pass0_src28.csv
[Mon May 20 00:51:28 2013] fullrun_mos2_xmm0160760201_pi300-10000_cl_pass0_src28_1.ximg exists
[Mon May 20 00:51:28 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0160760201_pi300-10000_cl_pass0_src28.csv
[Mon May 20 00:51:28 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0160760201_pi300-10000_cl_pass0_src28_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0160760201_pi300-10000_cl_pass0_src28.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 20 00:51:29 2013] fullrun_mos2_xmm0160760201_pi300-10000_cl_pass0_tfrozen_src28.ximg exists
[Mon May 20 00:51:29 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0160760201_pi300-10000_cl_pass0_tfrozen_src28.csv
[Mon May 20 00:51:29 2013] fullrun_mos2_xmm0160760201_pi300-10000_cl_pass0_tfrozen_src28_1.ximg exists
[Mon May 20 00:51:29 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0160760201_pi300-10000_cl_pass0_tfrozen_src28.csv
[Mon May 20 00:51:29 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0160760201_pi300-10000_cl_pass0_tfrozen_src28_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0160760201_pi300-10000_cl_pass0_tfrozen_src28.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 20 00:51:58 2013] Warning, spatial fit 28 centroid is now closest to src. 33
[Mon May 20 00:51:58 2013] Vigneting correction estimate = 1.000000
[Mon May 20 00:51:58 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon May 20 00:51:58 2013] Assessing source extent using major
[Mon May 20 00:51:58 2013] Source does appear to be extended
[Mon May 20 00:51:58 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon May 20 00:51:58 2013] Source is confused with source 34
[Mon May 20 00:52:19 2013] Using EEF radius (= 7.32 ")to estimate initial spatial extent for simple fitting
[Mon May 20 00:52:19 2013] Initial guess for spatial extent in simple fitting = 7.32"
[Mon May 20 00:52:19 2013] source mask rpix=1.7, npix_max = 19, mask sum = 12, frac = 0.630
[Mon May 20 00:52:19 2013] Giving source the simple spatial ID 28 for pass 1, mean size = 7.32"
[Mon May 20 00:52:21 2013] fullrun_mos2_xmm0160760201_pi300-10000_cl_pass1_src28.ximg exists
[Mon May 20 00:52:21 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0160760201_pi300-10000_cl_pass1_src28.csv
[Mon May 20 00:52:21 2013] fullrun_mos2_xmm0160760201_pi300-10000_cl_pass1_src28_1.ximg exists
[Mon May 20 00:52:21 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0160760201_pi300-10000_cl_pass1_src28.csv
[Mon May 20 00:52:21 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0160760201_pi300-10000_cl_pass1_src28_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0160760201_pi300-10000_cl_pass1_src28.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 20 00:52:22 2013] fullrun_mos2_xmm0160760201_pi300-10000_cl_pass1_tfrozen_src28.ximg exists
[Mon May 20 00:52:22 2013] fullrun_mos2_xmm0160760201_pi300-10000_cl_pass1_tfrozen_src28_1.ximg exists
[Mon May 20 00:52:22 2013] Fit fullrun_mos2_xmm0160760201_pi300-10000_cl_pass1_tfrozen_src28 appears to have run properly
[Mon May 20 00:52:46 2013] Warning: source 26 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 36 at 23.082624 pixels away
[Mon May 20 00:52:46 2013] Source 36 is offset by 5.041970 and -6.678929 pixels which is larger than
2 X fitted extent = 3.044317 x 3.044317, not incorporating fit results
[Mon May 20 00:52:46 2013] Vigneting correction estimate = 1.000000
[Mon May 20 00:52:46 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon May 20 00:52:46 2013] Assessing source extent using major
[Mon May 20 00:52:46 2013] Source does appear to be extended
[Mon May 20 00:52:46 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon May 20 01:28:22 2013] XMMSAS src. selection expression = ellipse(25228.175415, 27940.293152, 652.500000, 652.500000, 0.000000, X, Y)
[Mon May 20 01:28:22 2013] Not overwriting source region fullrun_mos2_xmm0160760201_pi300-10000_pass1_cl_src36_src.reg
[Mon May 20 01:28:22 2013] Extracting stamp from image fullrun_mos2_xmm0160760201_pi300-10000_cl_sm2.00.img.gz, (253, 284) - (328, 359)
[Mon May 20 01:28:22 2013] XMMSAS bgd. selection expression = annulus(25228.175415, 27940.293152, 1087.500000, 2175.000000, X, Y) && !ellipse(24168.608200, 24891.201000, 2894.784083, 2894.784083, 0.000000, X, Y) && !ellipse(23239.294000, 25633.506000, 278.708008, 278.708008, 0.000000, X, Y) && !ellipse(23679.642853, 25970.954376, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23224.130096, 25198.019592, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23991.693756, 26579.818970, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23392.088000, 29191.406000, 1261.776036, 1261.776036, 0.000000, X, Y) && !ellipse(25790.222000, 28004.736000, 1188.376034, 1188.376034, 0.000000, X, Y) && !ellipse(25116.708000, 27069.890000, 2376.752068, 2376.752068, 0.000000, X, Y) && !ellipse(26299.127000, 29047.224000, 1248.512036, 568.551216, 300.328000, X, Y) && !ellipse(26995.713200, 30419.996800, 1324.640038, 552.320816, 116.840300, X, Y)
[Mon May 20 01:28:22 2013] Writing fullrun_mos2_xmm0160760201_pi300-10000_pass1_cl_src36.gif
[Mon May 20 01:28:26 2013] ../../xmm0160760201/products/events/fullrun_mos2_xmm0160760201_pi300-10000_pass1_cl_src36_src.evt and ../../xmm0160760201/products/events/fullrun_mos2_xmm0160760201_pi300-10000_pass1_cl_src36_bgd.evt exist, delete to re-create
[Mon May 20 01:28:26 2013] Mean detx,y = (-288.33, -3057.30) 
[Mon May 20 01:28:26 2013] ../../xmm0160760201/products/images/fullrun_mos2_xmm0160760201_pi300-10000_pass1_cl_src36_src.img and ../../xmm0160760201/products/images/fullrun_mos2_xmm0160760201_pi300-10000_pass1_cl_src36_bgd.img exist, delete to re-create
[Mon May 20 01:28:26 2013] ../../xmm0160760201/products/spectra/fullrun_mos2_xmm0160760201_pi300-10000_pass1_cl_src36_src_b10.pi.gz and ../../xmm0160760201/products/spectra/fullrun_mos2_xmm0160760201_pi300-10000_pass1_cl_src36_bgd.pi exist, delete to re-create
[Mon May 20 01:28:26 2013] Setting source spectrum file to fullrun_mos2_xmm0160760201_pi300-10000_pass1_cl_src36_src_b10.pi.gz
[Mon May 20 01:28:26 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0160760201_pi300-10000_pass1_cl_src36_bgd.pi.gz
[Mon May 20 01:28:26 2013] ../../xmm0160760201/products/lightcurves/fullrun_mos2_xmm0160760201_pi300-10000_pass1_cl_src36_src.lc and ../../xmm0160760201/products/lightcurves/fullrun_mos2_xmm0160760201_pi300-10000_pass1_cl_src36_bgd.lc exist, delete to re-create
[Mon May 20 01:28:36 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Mon May 20 01:28:36 2013] rmf not generated due to insufficient counts
[Mon May 20 01:28:36 2013] fullrun_mos2_xmm0160760201_pi300-10000_pass1_cl_src36.arf exists, delete to re-create
[Mon May 20 01:30:46 2013] Updating aperture counts using extracted products
[Mon May 20 01:30:46 2013] Total counts from fullrun_mos2_xmm0160760201_pi300-10000_pass1_cl_src36_src_b10.pi.gz = 2029.00
[Mon May 20 01:30:46 2013] Total counts from fullrun_mos2_xmm0160760201_pi300-10000_pass1_cl_src36_bgd.pi.gz = 604.00
[Mon May 20 01:30:46 2013] Got source and background scale factors 1180744.000000, 932800.000000
[Mon May 20 01:30:46 2013] User source parameters:
  Position = (290.5, 321.7) = 7 48 24.17 -67 42 31.1
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 1264.5 +/- 46.1
  Background aperture counts = 764.5
  Rate = 0.01 +/- 0.0005

[Mon May 20 01:30:46 2013] Updating counts from extracted products
[Mon May 20 01:30:46 2013] Set source signif. to 1264.45/27.65 = 45.73
[Mon May 20 01:30:51 2013] Calculating source flux in energy range 0.30-8.00
[Mon May 20 01:30:51 2013] Using photon index=1.80, rate=0.0149, arf fullrun_mos2_xmm0160760201_pi300-10000_pass1_cl_src36.arf
[Mon May 20 01:30:51 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Mon May 20 01:30:51 2013] Updating source flux to 1.7e-13
[Mon May 20 01:30:59 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Mon May 20 01:31:34 2013] xmm0160760201/analysis//spectral/fullrun_mos2_xmm0160760201_pi300-10000_pass1_cl_src36_pl.csv not found, spectral fit skipped or did not complete