[Mon May 20 00:50:43 2013] Detection parameters:
  Position = (310.2, 348.1) = 7 48 9.16 -67 40 41.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 161.2 +/- 22.8
  Background counts = 122.1
  Rate = 0.002 +/- 0.0003

[Mon May 20 00:50:47 2013] Off-axis axis estimate = 3.70'
[Mon May 20 00:51:26 2013] Using EEF radius (= 8.28 ")to estimate initial spatial extent for simple fitting
[Mon May 20 00:51:26 2013] Initial guess for spatial extent in simple fitting = 8.28"
[Mon May 20 00:51:26 2013] source mask rpix=1.9, npix_max = 23, mask sum = 25, frac = 1.082
[Mon May 20 00:51:26 2013] Giving source the simple spatial ID 33 for pass 0, mean size = 8.28"
[Mon May 20 00:51:28 2013] fullrun_mos2_xmm0160760201_pi300-10000_cl_pass0_src33.ximg exists
[Mon May 20 00:51:28 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0160760201_pi300-10000_cl_pass0_src33.csv
[Mon May 20 00:51:28 2013] fullrun_mos2_xmm0160760201_pi300-10000_cl_pass0_src33_1.ximg exists
[Mon May 20 00:51:28 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0160760201_pi300-10000_cl_pass0_src33.csv
[Mon May 20 00:51:28 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0160760201_pi300-10000_cl_pass0_src33_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0160760201_pi300-10000_cl_pass0_src33.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 20 00:51:29 2013] fullrun_mos2_xmm0160760201_pi300-10000_cl_pass0_tfrozen_src33.ximg exists
[Mon May 20 00:51:29 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0160760201_pi300-10000_cl_pass0_tfrozen_src33.csv
[Mon May 20 00:51:29 2013] fullrun_mos2_xmm0160760201_pi300-10000_cl_pass0_tfrozen_src33_1.ximg exists
[Mon May 20 00:51:29 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0160760201_pi300-10000_cl_pass0_tfrozen_src33.csv
[Mon May 20 00:51:29 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0160760201_pi300-10000_cl_pass0_tfrozen_src33_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0160760201_pi300-10000_cl_pass0_tfrozen_src33.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 20 00:51:58 2013] Source 30 is offset by -5.208214 and -7.539192 pixels which is larger than
2 X fitted extent = 1.185453 x 1.185453, not incorporating fit results
[Mon May 20 00:51:58 2013] Vigneting correction estimate = 1.000000
[Mon May 20 00:51:58 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon May 20 00:51:58 2013] Assessing source extent using major
[Mon May 20 00:51:58 2013] Source does appear to be extended
[Mon May 20 00:51:58 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon May 20 00:52:19 2013] Using EEF radius (= 8.28 ")to estimate initial spatial extent for simple fitting
[Mon May 20 00:52:19 2013] Initial guess for spatial extent in simple fitting = 8.28"
[Mon May 20 00:52:19 2013] source mask rpix=1.9, npix_max = 23, mask sum = 25, frac = 1.082
[Mon May 20 00:52:19 2013] Giving source the simple spatial ID 32 for pass 1, mean size = 8.28"
[Mon May 20 00:52:21 2013] fullrun_mos2_xmm0160760201_pi300-10000_cl_pass1_src32.ximg exists
[Mon May 20 00:52:21 2013] fullrun_mos2_xmm0160760201_pi300-10000_cl_pass1_src32_1.ximg exists
[Mon May 20 00:52:21 2013] Fit fullrun_mos2_xmm0160760201_pi300-10000_cl_pass1_src32 appears to have run properly
[Mon May 20 00:52:22 2013] fullrun_mos2_xmm0160760201_pi300-10000_cl_pass1_tfrozen_src32.ximg exists
[Mon May 20 00:52:22 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0160760201_pi300-10000_cl_pass1_tfrozen_src32.csv
[Mon May 20 00:52:22 2013] fullrun_mos2_xmm0160760201_pi300-10000_cl_pass1_tfrozen_src32_1.ximg exists
[Mon May 20 00:52:22 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0160760201_pi300-10000_cl_pass1_tfrozen_src32.csv
[Mon May 20 00:52:22 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0160760201_pi300-10000_cl_pass1_tfrozen_src32_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0160760201_pi300-10000_cl_pass1_tfrozen_src32.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 20 00:52:46 2013] Spatial fit model total counts = 1397.720000, observed total counts = 1331.000000
[Mon May 20 00:52:46 2013] Offset between fit and detection position for source 30 = 2.203748 pixels
[Mon May 20 00:52:46 2013] 1354.506000 total counts/ 1058.050000 bgd. counts: snr = 9.113961
Spatial fit parameters:
  Offset between fit and detection position for source 30 = 2.203748 pixels
  Position = (310.9, 350.2) = 7 48 8.65 -67 40 31.5
  Extent = 16.6 (16.5-33.1)" x 6.9 (4.8-9.2)", rotation angle = 117 (110-126) degrees
  Source counts = 296.5 +/- 36.8
  Background counts = 1058.0
  Rate = 0.003 +/- 0.0004
[Mon May 20 00:52:46 2013] Vigneting correction estimate = 1.000000
[Mon May 20 00:52:46 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon May 20 00:52:46 2013] Assessing source extent using major axis lower bound
[Mon May 20 00:52:46 2013] Source does appear to be extended
[Mon May 20 00:52:46 2013] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 1.79
[Mon May 20 00:52:46 2013] Source is asymmetric
[Mon May 20 01:28:22 2013] XMMSAS src. selection expression = ellipse(26995.713200, 30419.996800, 993.480029, 414.240612, 116.840300, X, Y)
[Mon May 20 01:28:22 2013] Not overwriting source region fullrun_mos2_xmm0160760201_pi300-10000_pass1_cl_src30_src.reg
[Mon May 20 01:28:22 2013] Extracting stamp from image fullrun_mos2_xmm0160760201_pi300-10000_cl_sm2.00.img.gz, (254, 293) - (368, 407)
[Mon May 20 01:28:22 2013] XMMSAS bgd. selection expression = annulus(26995.713200, 30419.996800, 1655.800048, 3311.600095, X, Y) && !ellipse(24168.608200, 24891.201000, 2894.784083, 2894.784083, 0.000000, X, Y) && !ellipse(23991.693756, 26579.818970, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23392.088000, 29191.406000, 1261.776036, 1261.776036, 0.000000, X, Y) && !ellipse(25790.222000, 28004.736000, 1188.376034, 1188.376034, 0.000000, X, Y) && !ellipse(25405.077362, 31491.803711, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25116.708000, 27069.890000, 2376.752068, 2376.752068, 0.000000, X, Y) && !ellipse(26299.127000, 29047.224000, 1248.512036, 568.551216, 300.328000, X, Y) && !ellipse(25228.175415, 27940.293152, 870.000000, 870.000000, 0.000000, X, Y)
[Mon May 20 01:28:22 2013] Writing fullrun_mos2_xmm0160760201_pi300-10000_pass1_cl_src30.gif
[Mon May 20 01:28:26 2013] ../../xmm0160760201/products/events/fullrun_mos2_xmm0160760201_pi300-10000_pass1_cl_src30_src.evt and ../../xmm0160760201/products/events/fullrun_mos2_xmm0160760201_pi300-10000_pass1_cl_src30_bgd.evt exist, delete to re-create
[Mon May 20 01:28:26 2013] Mean detx,y = (126.11, -6063.47) 
[Mon May 20 01:28:26 2013] ../../xmm0160760201/products/images/fullrun_mos2_xmm0160760201_pi300-10000_pass1_cl_src30_src.img and ../../xmm0160760201/products/images/fullrun_mos2_xmm0160760201_pi300-10000_pass1_cl_src30_bgd.img exist, delete to re-create
[Mon May 20 01:28:26 2013] ../../xmm0160760201/products/spectra/fullrun_mos2_xmm0160760201_pi300-10000_pass1_cl_src30_src_b10.pi.gz and ../../xmm0160760201/products/spectra/fullrun_mos2_xmm0160760201_pi300-10000_pass1_cl_src30_bgd.pi exist, delete to re-create
[Mon May 20 01:28:26 2013] Setting source spectrum file to fullrun_mos2_xmm0160760201_pi300-10000_pass1_cl_src30_src_b10.pi.gz
[Mon May 20 01:28:26 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0160760201_pi300-10000_pass1_cl_src30_bgd.pi.gz
[Mon May 20 01:28:26 2013] ../../xmm0160760201/products/lightcurves/fullrun_mos2_xmm0160760201_pi300-10000_pass1_cl_src30_src.lc and ../../xmm0160760201/products/lightcurves/fullrun_mos2_xmm0160760201_pi300-10000_pass1_cl_src30_bgd.lc exist, delete to re-create
[Mon May 20 01:28:36 2013] fullrun_mos2_xmm0160760201_pi300-10000_pass1_cl_src30.rmf exists, delete to re-create
[Mon May 20 01:28:36 2013] fullrun_mos2_xmm0160760201_pi300-10000_pass1_cl_src30.arf exists, delete to re-create
[Mon May 20 01:30:47 2013] Updating aperture counts using extracted products
[Mon May 20 01:30:47 2013] Total counts from fullrun_mos2_xmm0160760201_pi300-10000_pass1_cl_src30_src_b10.pi.gz = 799.00
[Mon May 20 01:30:47 2013] Total counts from fullrun_mos2_xmm0160760201_pi300-10000_pass1_cl_src30_bgd.pi.gz = 6557.00
[Mon May 20 01:30:47 2013] Got source and background scale factors 1149326.000000, 16832691.000000
[Mon May 20 01:30:47 2013] User source parameters:
  Position = (310.9, 350.2) = 7 48 8.65 -67 40 31.5
  Extent = 16.6 (16.5-33.1)" x 6.9 (4.8-9.2)", rotation angle = 117 (110-126) degrees
  Source aperture counts = 351.3 +/- 29.3
  Background aperture counts = 447.7
  Rate = 0.004 +/- 0.0003

[Mon May 20 01:30:51 2013] Calculating source flux in energy range 0.30-8.00
[Mon May 20 01:30:51 2013] Using photon index=1.80, rate=0.00349, arf fullrun_mos2_xmm0160760201_pi300-10000_pass1_cl_src30.arf
[Mon May 20 01:30:51 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Mon May 20 01:30:51 2013] Updating source flux to 5.3e-14
[Mon May 20 01:30:59 2013] Flag b found in src. 30 procflags, skipping spectral fitting
[Mon May 20 01:31:34 2013] xmm0160760201/analysis//spectral/fullrun_mos2_xmm0160760201_pi300-10000_pass1_cl_src30_pl.csv not found, spectral fit skipped or did not complete