[Mon May 20 00:50:39 2013] Detection parameters:
  Position = (269.2, 294.2) = 7 48 40.49 -67 44 34.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 6192.7 +/- 110.6
  Background counts = 165.7
  Rate = 0.07 +/- 0.001

[Mon May 20 00:50:47 2013] Off-axis axis estimate = 2.14'
[Mon May 20 00:51:26 2013] Using EEF radius (= 7.50 ")to estimate initial spatial extent for simple fitting
[Mon May 20 00:51:26 2013] Initial guess for spatial extent in simple fitting = 7.50"
[Mon May 20 00:51:26 2013] source mask rpix=1.7, npix_max = 19, mask sum = 16, frac = 0.809
[Mon May 20 00:51:26 2013] Giving source the simple spatial ID 2 for pass 0, mean size = 7.50"
[Mon May 20 00:51:27 2013] fullrun_mos2_xmm0160760201_pi300-10000_cl_pass0_src2.ximg exists
[Mon May 20 00:51:27 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0160760201_pi300-10000_cl_pass0_src2.csv
[Mon May 20 00:51:27 2013] fullrun_mos2_xmm0160760201_pi300-10000_cl_pass0_src2_1.ximg exists
[Mon May 20 00:51:27 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0160760201_pi300-10000_cl_pass0_src2.csv
[Mon May 20 00:51:27 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0160760201_pi300-10000_cl_pass0_src2_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0160760201_pi300-10000_cl_pass0_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 20 00:51:29 2013] fullrun_mos2_xmm0160760201_pi300-10000_cl_pass0_tfrozen_src2.ximg exists
[Mon May 20 00:51:29 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0160760201_pi300-10000_cl_pass0_tfrozen_src2.csv
[Mon May 20 00:51:29 2013] fullrun_mos2_xmm0160760201_pi300-10000_cl_pass0_tfrozen_src2_1.ximg exists
[Mon May 20 00:51:29 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0160760201_pi300-10000_cl_pass0_tfrozen_src2.csv
[Mon May 20 00:51:29 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0160760201_pi300-10000_cl_pass0_tfrozen_src2_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0160760201_pi300-10000_cl_pass0_tfrozen_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 20 00:51:58 2013] Source 2 is offset by -6.665740 and 4.780068 pixels which is larger than
2 X fitted extent = 2.473830 x 2.473830, not incorporating fit results
[Mon May 20 00:51:58 2013] Spatial fit model total counts = 37705.000000, observed total counts = 40143.000000
[Mon May 20 00:51:58 2013] Offset between fit and detection position for source 2 = 1.821147 pixels
[Mon May 20 00:51:58 2013] Warning, changing simple spatial fit ID from 2 to 3
[Mon May 20 00:51:58 2013] 26326.677000 total counts/ 25591.500000 bgd. counts: snr = 4.595619
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 1.821147 pixels
  Position = (267.7, 295.2) = 7 48 41.68 -67 44 30.7
  Extent = 3.5 (3.5-3.5)", rotation angle = 0
  Source counts = 735.2 +/- 162.3
  Background counts = 25591.5
  Rate = 0.009 +/- 0.002
[Mon May 20 00:51:58 2013] Vigneting correction estimate = 1.000000
[Mon May 20 00:51:58 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon May 20 00:51:58 2013] Assessing source extent using major axis lower bound
[Mon May 20 00:51:58 2013] Source does appear to be extended
[Mon May 20 00:51:58 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon May 20 00:51:58 2013] Source is confused with source 5
[Mon May 20 00:51:58 2013] Source is confused with source 3
[Mon May 20 00:52:19 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Mon May 20 00:52:19 2013] Initial guess for spatial extent in simple fitting = 3.48"
[Mon May 20 00:52:19 2013] source mask rpix=0.8, npix_max = 6, mask sum = 6, frac = 0.886
[Mon May 20 00:52:19 2013] Giving source the simple spatial ID 2 for pass 1, mean size = 3.48"
[Mon May 20 00:52:21 2013] fullrun_mos2_xmm0160760201_pi300-10000_cl_pass1_src2.ximg exists
[Mon May 20 00:52:21 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0160760201_pi300-10000_cl_pass1_src2.csv
[Mon May 20 00:52:21 2013] fullrun_mos2_xmm0160760201_pi300-10000_cl_pass1_src2_1.ximg exists
[Mon May 20 00:52:21 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0160760201_pi300-10000_cl_pass1_src2.csv
[Mon May 20 00:52:21 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0160760201_pi300-10000_cl_pass1_src2_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0160760201_pi300-10000_cl_pass1_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 20 00:52:22 2013] fullrun_mos2_xmm0160760201_pi300-10000_cl_pass1_tfrozen_src2.ximg exists
[Mon May 20 00:52:22 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0160760201_pi300-10000_cl_pass1_tfrozen_src2.csv
[Mon May 20 00:52:22 2013] fullrun_mos2_xmm0160760201_pi300-10000_cl_pass1_tfrozen_src2_1.ximg exists
[Mon May 20 00:52:22 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0160760201_pi300-10000_cl_pass1_tfrozen_src2.csv
[Mon May 20 00:52:22 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0160760201_pi300-10000_cl_pass1_tfrozen_src2_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0160760201_pi300-10000_cl_pass1_tfrozen_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 20 00:52:46 2013] Spatial fit model total counts = 48502.100000, observed total counts = 41024.000000
[Mon May 20 00:52:46 2013] Poor agreement between spatial fit and data for source 2
It may help to tweak spatial fit manually
Not incorporating fit results
[Mon May 20 00:52:46 2013] Vigneting correction estimate = 1.000000
[Mon May 20 00:52:46 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon May 20 00:52:46 2013] Assessing source extent using major axis lower bound
[Mon May 20 00:52:46 2013] Source does appear to be extended
[Mon May 20 00:52:46 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon May 20 01:28:21 2013] XMMSAS src. selection expression = ellipse(23239.294000, 25633.506000, 209.031006, 209.031006, 0.000000, X, Y)
[Mon May 20 01:28:21 2013] Not overwriting source region fullrun_mos2_xmm0160760201_pi300-10000_pass1_cl_src2_src.reg
[Mon May 20 01:28:21 2013] Extracting stamp from image fullrun_mos2_xmm0160760201_pi300-10000_cl_sm2.00.img.gz, (256, 283) - (280, 307)
[Mon May 20 01:28:21 2013] XMMSAS bgd. selection expression = annulus(23239.294000, 25633.506000, 348.385010, 696.770020, X, Y) && !ellipse(24168.608200, 24891.201000, 2894.784083, 2894.784083, 0.000000, X, Y) && !ellipse(23679.642853, 25970.954376, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23224.130096, 25198.019592, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23030.238617, 24778.386902, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23991.693756, 26579.818970, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25116.708000, 27069.890000, 2376.752068, 2376.752068, 0.000000, X, Y) && !ellipse(21435.702000, 26890.198000, 1366.736039, 1366.736039, 0.000000, X, Y)
[Mon May 20 01:28:21 2013] Writing fullrun_mos2_xmm0160760201_pi300-10000_pass1_cl_src2.gif
[Mon May 20 01:28:23 2013] ../../xmm0160760201/products/events/fullrun_mos2_xmm0160760201_pi300-10000_pass1_cl_src2_src.evt and ../../xmm0160760201/products/events/fullrun_mos2_xmm0160760201_pi300-10000_pass1_cl_src2_bgd.evt exist, delete to re-create
[Mon May 20 01:28:23 2013] Mean detx,y = (-1044.21, -138.62) 
[Mon May 20 01:28:23 2013] ../../xmm0160760201/products/images/fullrun_mos2_xmm0160760201_pi300-10000_pass1_cl_src2_src.img and ../../xmm0160760201/products/images/fullrun_mos2_xmm0160760201_pi300-10000_pass1_cl_src2_bgd.img exist, delete to re-create
[Mon May 20 01:28:23 2013] ../../xmm0160760201/products/spectra/fullrun_mos2_xmm0160760201_pi300-10000_pass1_cl_src2_src_b10.pi.gz and ../../xmm0160760201/products/spectra/fullrun_mos2_xmm0160760201_pi300-10000_pass1_cl_src2_bgd.pi exist, delete to re-create
[Mon May 20 01:28:23 2013] Setting source spectrum file to fullrun_mos2_xmm0160760201_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Mon May 20 01:28:23 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0160760201_pi300-10000_pass1_cl_src2_bgd.pi.gz
[Mon May 20 01:28:23 2013] ../../xmm0160760201/products/lightcurves/fullrun_mos2_xmm0160760201_pi300-10000_pass1_cl_src2_src.lc and ../../xmm0160760201/products/lightcurves/fullrun_mos2_xmm0160760201_pi300-10000_pass1_cl_src2_bgd.lc exist, delete to re-create
[Mon May 20 01:28:36 2013] fullrun_mos2_xmm0160760201_pi300-10000_pass1_cl_src2.rmf exists, delete to re-create
[Mon May 20 01:28:36 2013] fullrun_mos2_xmm0160760201_pi300-10000_pass1_cl_src2.arf exists, delete to re-create
[Mon May 20 01:30:38 2013] Updating aperture counts using extracted products
[Mon May 20 01:30:38 2013] Total counts from fullrun_mos2_xmm0160760201_pi300-10000_pass1_cl_src2_src_b10.pi.gz = 2899.00
[Mon May 20 01:30:38 2013] Total counts from fullrun_mos2_xmm0160760201_pi300-10000_pass1_cl_src2_bgd.pi.gz = 0.00
[Mon May 20 01:30:38 2013] Got source and background scale factors 139200.000000, 0.000000
[Mon May 20 01:30:38 2013] Background scale factor is not positive, halting re-assessment of this source
[Mon May 20 01:30:49 2013] Calculating source flux in energy range 0.30-8.00
[Mon May 20 01:30:49 2013] Using photon index=1.80, rate=0.00864, arf fullrun_mos2_xmm0160760201_pi300-10000_pass1_cl_src2.arf
[Mon May 20 01:30:49 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Mon May 20 01:30:49 2013] Updating source flux to 1.3e-13
[Mon May 20 01:30:59 2013] Flag b found in src. 2 procflags, skipping spectral fitting
[Mon May 20 01:30:59 2013] Flag p found in src. 2 procflags, skipping spectral fitting
[Mon May 20 01:30:59 2013] Flag c found in src. 2 procflags, skipping spectral fitting
[Mon May 20 01:31:34 2013] xmm0160760201/analysis//spectral/fullrun_mos2_xmm0160760201_pi300-10000_pass1_cl_src2_pl.csv not found, spectral fit skipped or did not complete