[Mon May 20 00:50:41 2013] Detection parameters:
  Position = (373.5, 292.3) = 7 47 20.68 -67 44 42.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 341.5 +/- 25.1
  Background counts = 82.6
  Rate = 0.006 +/- 0.0004

[Mon May 20 00:50:47 2013] Off-axis axis estimate = 5.46'
[Mon May 20 00:51:26 2013] Using EEF radius (= 9.16 ")to estimate initial spatial extent for simple fitting
[Mon May 20 00:51:26 2013] Initial guess for spatial extent in simple fitting = 9.16"
[Mon May 20 00:51:26 2013] source mask rpix=2.1, npix_max = 27, mask sum = 24, frac = 0.884
[Mon May 20 00:51:26 2013] Giving source the simple spatial ID 15 for pass 0, mean size = 9.16"
[Mon May 20 00:51:28 2013] fullrun_mos2_xmm0160760201_pi300-10000_cl_pass0_src15.ximg exists
[Mon May 20 00:51:28 2013] fullrun_mos2_xmm0160760201_pi300-10000_cl_pass0_src15_1.ximg exists
[Mon May 20 00:51:28 2013] Fit fullrun_mos2_xmm0160760201_pi300-10000_cl_pass0_src15 appears to have run properly
[Mon May 20 00:51:29 2013] fullrun_mos2_xmm0160760201_pi300-10000_cl_pass0_tfrozen_src15.ximg exists
[Mon May 20 00:51:29 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0160760201_pi300-10000_cl_pass0_tfrozen_src15.csv
[Mon May 20 00:51:29 2013] fullrun_mos2_xmm0160760201_pi300-10000_cl_pass0_tfrozen_src15_1.ximg exists
[Mon May 20 00:51:29 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0160760201_pi300-10000_cl_pass0_tfrozen_src15.csv
[Mon May 20 00:51:29 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0160760201_pi300-10000_cl_pass0_tfrozen_src15_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0160760201_pi300-10000_cl_pass0_tfrozen_src15.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 20 00:51:58 2013] Source 16 is offset by -6.246606 and 5.968286 pixels which is larger than
2 X fitted extent = 0.838326 x 0.838326, not incorporating fit results
[Mon May 20 00:51:58 2013] Vigneting correction estimate = 1.000000
[Mon May 20 00:51:58 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon May 20 00:51:58 2013] Assessing source extent using major
[Mon May 20 00:51:58 2013] Source does appear to be extended
[Mon May 20 00:51:58 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon May 20 00:52:19 2013] Using EEF radius (= 9.16 ")to estimate initial spatial extent for simple fitting
[Mon May 20 00:52:19 2013] Initial guess for spatial extent in simple fitting = 9.16"
[Mon May 20 00:52:19 2013] source mask rpix=2.1, npix_max = 27, mask sum = 24, frac = 0.884
[Mon May 20 00:52:19 2013] Giving source the simple spatial ID 15 for pass 1, mean size = 9.16"
[Mon May 20 00:52:21 2013] fullrun_mos2_xmm0160760201_pi300-10000_cl_pass1_src15.ximg exists
[Mon May 20 00:52:21 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0160760201_pi300-10000_cl_pass1_src15.csv
[Mon May 20 00:52:21 2013] fullrun_mos2_xmm0160760201_pi300-10000_cl_pass1_src15_1.ximg exists
[Mon May 20 00:52:21 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0160760201_pi300-10000_cl_pass1_src15.csv
[Mon May 20 00:52:21 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0160760201_pi300-10000_cl_pass1_src15_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0160760201_pi300-10000_cl_pass1_src15.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 20 00:52:22 2013] fullrun_mos2_xmm0160760201_pi300-10000_cl_pass1_tfrozen_src15.ximg exists
[Mon May 20 00:52:22 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0160760201_pi300-10000_cl_pass1_tfrozen_src15.csv
[Mon May 20 00:52:22 2013] fullrun_mos2_xmm0160760201_pi300-10000_cl_pass1_tfrozen_src15_1.ximg exists
[Mon May 20 00:52:22 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0160760201_pi300-10000_cl_pass1_tfrozen_src15.csv
[Mon May 20 00:52:22 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0160760201_pi300-10000_cl_pass1_tfrozen_src15_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0160760201_pi300-10000_cl_pass1_tfrozen_src15.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 20 00:52:46 2013] Warning, spatial fit 15 centroid is now closest to src. 40
[Mon May 20 00:52:46 2013] Vigneting correction estimate = 1.000000
[Mon May 20 00:52:46 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon May 20 00:52:46 2013] Assessing source extent using major
[Mon May 20 00:52:46 2013] Source does appear to be extended
[Mon May 20 00:52:46 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon May 20 01:28:21 2013] XMMSAS src. selection expression = ellipse(32442.519257, 25378.266876, 652.500000, 652.500000, 0.000000, X, Y)
[Mon May 20 01:28:21 2013] Not overwriting source region fullrun_mos2_xmm0160760201_pi300-10000_pass1_cl_src16_src.reg
[Mon May 20 01:28:21 2013] Extracting stamp from image fullrun_mos2_xmm0160760201_pi300-10000_cl_sm2.00.img.gz, (336, 255) - (411, 330)
[Mon May 20 01:28:21 2013] XMMSAS bgd. selection expression = annulus(32442.519257, 25378.266876, 1087.500000, 2175.000000, X, Y) && !ellipse(34356.067902, 25426.091919, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33139.913147, 27379.696991, 870.000000, 870.000000, 0.000000, X, Y)
[Mon May 20 01:28:21 2013] Writing fullrun_mos2_xmm0160760201_pi300-10000_pass1_cl_src16.gif
[Mon May 20 01:28:25 2013] ../../xmm0160760201/products/events/fullrun_mos2_xmm0160760201_pi300-10000_pass1_cl_src16_src.evt and ../../xmm0160760201/products/events/fullrun_mos2_xmm0160760201_pi300-10000_pass1_cl_src16_bgd.evt exist, delete to re-create
[Mon May 20 01:28:25 2013] Mean detx,y = (7248.36, -4163.96) 
[Mon May 20 01:28:25 2013] ../../xmm0160760201/products/images/fullrun_mos2_xmm0160760201_pi300-10000_pass1_cl_src16_src.img and ../../xmm0160760201/products/images/fullrun_mos2_xmm0160760201_pi300-10000_pass1_cl_src16_bgd.img exist, delete to re-create
[Mon May 20 01:28:25 2013] ../../xmm0160760201/products/spectra/fullrun_mos2_xmm0160760201_pi300-10000_pass1_cl_src16_src_b10.pi.gz and ../../xmm0160760201/products/spectra/fullrun_mos2_xmm0160760201_pi300-10000_pass1_cl_src16_bgd.pi exist, delete to re-create
[Mon May 20 01:28:25 2013] Setting source spectrum file to fullrun_mos2_xmm0160760201_pi300-10000_pass1_cl_src16_src_b10.pi.gz
[Mon May 20 01:28:25 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0160760201_pi300-10000_pass1_cl_src16_bgd.pi.gz
[Mon May 20 01:28:25 2013] ../../xmm0160760201/products/lightcurves/fullrun_mos2_xmm0160760201_pi300-10000_pass1_cl_src16_src.lc and ../../xmm0160760201/products/lightcurves/fullrun_mos2_xmm0160760201_pi300-10000_pass1_cl_src16_bgd.lc exist, delete to re-create
[Mon May 20 01:28:36 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Mon May 20 01:28:36 2013] rmf not generated due to insufficient counts
[Mon May 20 01:28:36 2013] fullrun_mos2_xmm0160760201_pi300-10000_pass1_cl_src16.arf exists, delete to re-create
[Mon May 20 01:30:41 2013] Updating aperture counts using extracted products
[Mon May 20 01:30:41 2013] Total counts from fullrun_mos2_xmm0160760201_pi300-10000_pass1_cl_src16_src_b10.pi.gz = 639.00
[Mon May 20 01:30:42 2013] Total counts from fullrun_mos2_xmm0160760201_pi300-10000_pass1_cl_src16_bgd.pi.gz = 2568.00
[Mon May 20 01:30:42 2013] Got source and background scale factors 1154054.000000, 7997980.000000
[Mon May 20 01:30:42 2013] User source parameters:
  Position = (373.5, 292.3) = 7 47 20.68 -67 44 42.7
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 268.5 +/- 26.3
  Background aperture counts = 370.5
  Rate = 0.003 +/- 0.0003

[Mon May 20 01:30:42 2013] Updating counts from extracted products
[Mon May 20 01:30:42 2013] Set source signif. to 268.46/19.25 = 13.95
[Mon May 20 01:30:50 2013] Calculating source flux in energy range 0.30-8.00
[Mon May 20 01:30:50 2013] Using photon index=1.80, rate=0.00316, arf fullrun_mos2_xmm0160760201_pi300-10000_pass1_cl_src16.arf
[Mon May 20 01:30:50 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Mon May 20 01:30:50 2013] Updating source flux to 5.5e-14
[Mon May 20 01:30:59 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Mon May 20 01:31:34 2013] xmm0160760201/analysis//spectral/fullrun_mos2_xmm0160760201_pi300-10000_pass1_cl_src16_pl.csv not found, spectral fit skipped or did not complete