[Mon May 20 00:50:38 2013] Detection parameters:
  Position = (278.2, 286.9) = 7 48 33.65 -67 45 6.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 402167.6 +/- 722.8
  Background counts = 166.7
  Rate = 5 +/- 0.008

[Mon May 20 00:50:47 2013] Off-axis axis estimate = 1.69'
[Mon May 20 00:51:26 2013] Using EEF radius (= 7.27 ")to estimate initial spatial extent for simple fitting
[Mon May 20 00:51:26 2013] Initial guess for spatial extent in simple fitting = 7.27"
[Mon May 20 00:51:26 2013] source mask rpix=1.7, npix_max = 18, mask sum = 16, frac = 0.848
[Mon May 20 00:51:26 2013] Giving source the simple spatial ID 1 for pass 0, mean size = 7.27"
[Mon May 20 00:51:27 2013] fullrun_mos2_xmm0160760201_pi300-10000_cl_pass0_src1.ximg exists
[Mon May 20 00:51:27 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0160760201_pi300-10000_cl_pass0_src1.csv
[Mon May 20 00:51:27 2013] fullrun_mos2_xmm0160760201_pi300-10000_cl_pass0_src1_1.ximg exists
[Mon May 20 00:51:27 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0160760201_pi300-10000_cl_pass0_src1.csv
[Mon May 20 00:51:27 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0160760201_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0160760201_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 20 00:51:29 2013] fullrun_mos2_xmm0160760201_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Mon May 20 00:51:29 2013] fullrun_mos2_xmm0160760201_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Mon May 20 00:51:29 2013] Fit fullrun_mos2_xmm0160760201_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Mon May 20 00:51:58 2013] Spatial fit model total counts = 473161.000000, observed total counts = 470575.000000
[Mon May 20 00:51:58 2013] Offset between fit and detection position for source 1 = 0.300376 pixels
[Mon May 20 00:51:58 2013] 460129.000000 total counts/ 25600.000000 bgd. counts: snr = 2715.806250
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.300376 pixels
  Position = (278.3, 286.6) = 7 48 33.57 -67 45 8.0
  Extent = 11.5 (11.5-11.5)", rotation angle = 0
  Source counts = 434529.0 +/- 678.3
  Background counts = 25600.0
  Rate = 5 +/- 0.008
[Mon May 20 00:51:58 2013] Vigneting correction estimate = 1.000000
[Mon May 20 00:51:58 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon May 20 00:51:58 2013] Assessing source extent using major axis lower bound
[Mon May 20 00:51:58 2013] Source does appear to be extended
[Mon May 20 00:51:58 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon May 20 00:52:19 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Mon May 20 00:52:19 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Mon May 20 00:52:19 2013] Initial guess for spatial extent in simple fitting = 11.52"
[Mon May 20 00:52:19 2013] source mask rpix=2.6, npix_max = 39, mask sum = 42, frac = 1.059
[Mon May 20 00:52:19 2013] Giving source the simple spatial ID 1 for pass 1, mean size = 11.52"
[Mon May 20 00:52:21 2013] fullrun_mos2_xmm0160760201_pi300-10000_cl_pass1_src1.ximg exists
[Mon May 20 00:52:21 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0160760201_pi300-10000_cl_pass1_src1.csv
[Mon May 20 00:52:21 2013] fullrun_mos2_xmm0160760201_pi300-10000_cl_pass1_src1_1.ximg exists
[Mon May 20 00:52:21 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0160760201_pi300-10000_cl_pass1_src1.csv
[Mon May 20 00:52:21 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0160760201_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0160760201_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 20 00:52:22 2013] fullrun_mos2_xmm0160760201_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Mon May 20 00:52:22 2013] fullrun_mos2_xmm0160760201_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Mon May 20 00:52:22 2013] Fit fullrun_mos2_xmm0160760201_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Mon May 20 00:52:46 2013] Spatial fit model total counts = 506901.000000, observed total counts = 511124.000000
[Mon May 20 00:52:46 2013] Offset between fit and detection position for source 1 = 0.081206 pixels
[Mon May 20 00:52:46 2013] 491513.000000 total counts/ 44100.000000 bgd. counts: snr = 2130.538095
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.081206 pixels
  Position = (278.4, 286.7) = 7 48 33.51 -67 45 7.9
  Extent = 12.1 (12.0-12.1)", rotation angle = 0
  Source counts = 447413.0 +/- 701.1
  Background counts = 44100.0
  Rate = 5 +/- 0.008
[Mon May 20 00:52:46 2013] Vigneting correction estimate = 1.000000
[Mon May 20 00:52:46 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon May 20 00:52:46 2013] Assessing source extent using major axis lower bound
[Mon May 20 00:52:46 2013] Source does appear to be extended
[Mon May 20 00:52:46 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon May 20 01:28:21 2013] Counts = 447413.000000, rescaling region sizes by 3.000000
[Mon May 20 01:28:21 2013] XMMSAS src. selection expression = ellipse(24168.608200, 24891.201000, 2171.088062, 2171.088062, 0.000000, X, Y)
[Mon May 20 01:28:21 2013] Not overwriting source region fullrun_mos2_xmm0160760201_pi300-10000_pass1_cl_src1_src.reg
[Mon May 20 01:28:21 2013] Extracting stamp from image fullrun_mos2_xmm0160760201_pi300-10000_cl_sm2.00.img.gz, (154, 162) - (403, 411)
[Mon May 20 01:28:21 2013] XMMSAS bgd. selection expression = annulus(24168.608200, 24891.201000, 10855.440312, 21710.880625, X, Y) && !ellipse(23239.294000, 25633.506000, 278.708008, 278.708008, 0.000000, X, Y) && !ellipse(23679.642853, 25970.954376, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23224.130096, 25198.019592, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23030.238617, 24778.386902, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23991.693756, 26579.818970, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22660.185944, 24040.333893, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34356.067902, 25426.091919, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25678.694061, 23678.084351, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23016.976720, 32398.832000, 332.051210, 332.051210, 0.000000, X, Y) && !ellipse(38535.496000, 24295.100000, 416.416812, 416.416812, 0.000000, X, Y) && !ellipse(23392.088000, 29191.406000, 1261.776036, 1261.776036, 0.000000, X, Y) && !ellipse(24378.167786, 34755.307312, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25232.797821, 22900.065186, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32442.519257, 25378.266876, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27091.028931, 24204.778442, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34170.845093, 29500.308716, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21735.301600, 20231.161300, 1503.368043, 351.024810, 117.147000, X, Y) && !ellipse(23352.837952, 17470.171844, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18816.442947, 19251.356659, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21380.736618, 19570.696945, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25790.222000, 28004.736000, 1188.376034, 1188.376034, 0.000000, X, Y) && !ellipse(25405.077362, 31491.803711, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30353.589996, 34769.575439, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25116.708000, 27069.890000, 2376.752068, 2376.752068, 0.000000, X, Y) && !ellipse(22154.480000, 21082.800000, 1396.656040, 1396.656040, 0.000000, X, Y) && !ellipse(26299.127000, 29047.224000, 1248.512036, 568.551216, 300.328000, X, Y) && !ellipse(22428.086000, 21531.876000, 1260.536036, 1260.536036, 0.000000, X, Y) && !ellipse(25228.175415, 27940.293152, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22548.956400, 21795.582000, 1324.640038, 381.873611, 114.522900, X, Y) && !ellipse(21435.702000, 26890.198000, 1366.736039, 1366.736039, 0.000000, X, Y) && !ellipse(26995.713200, 30419.996800, 1324.640038, 552.320816, 116.840300, X, Y) && !ellipse(32938.191986, 18205.253876, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22161.356384, 27628.210388, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33139.913147, 27379.696991, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22853.634000, 22639.700000, 1364.544039, 1364.544039, 0.000000, X, Y)
[Mon May 20 01:28:21 2013] Writing fullrun_mos2_xmm0160760201_pi300-10000_pass1_cl_src1.gif
[Mon May 20 01:28:22 2013] ../../xmm0160760201/products/events/fullrun_mos2_xmm0160760201_pi300-10000_pass1_cl_src1_src.evt and ../../xmm0160760201/products/events/fullrun_mos2_xmm0160760201_pi300-10000_pass1_cl_src1_bgd.evt exist, delete to re-create
[Mon May 20 01:28:23 2013] Mean detx,y = (106.49, 50.87) 
[Mon May 20 01:28:23 2013] ../../xmm0160760201/products/images/fullrun_mos2_xmm0160760201_pi300-10000_pass1_cl_src1_src.img and ../../xmm0160760201/products/images/fullrun_mos2_xmm0160760201_pi300-10000_pass1_cl_src1_bgd.img exist, delete to re-create
[Mon May 20 01:28:23 2013] ../../xmm0160760201/products/spectra/fullrun_mos2_xmm0160760201_pi300-10000_pass1_cl_src1_src_b10.pi.gz and ../../xmm0160760201/products/spectra/fullrun_mos2_xmm0160760201_pi300-10000_pass1_cl_src1_bgd.pi exist, delete to re-create
[Mon May 20 01:28:23 2013] Setting source spectrum file to fullrun_mos2_xmm0160760201_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Mon May 20 01:28:23 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0160760201_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Mon May 20 01:28:23 2013] ../../xmm0160760201/products/lightcurves/fullrun_mos2_xmm0160760201_pi300-10000_pass1_cl_src1_src.lc and ../../xmm0160760201/products/lightcurves/fullrun_mos2_xmm0160760201_pi300-10000_pass1_cl_src1_bgd.lc exist, delete to re-create
[Mon May 20 01:28:36 2013] fullrun_mos2_xmm0160760201_pi300-10000_pass1_cl_src1.rmf exists, delete to re-create
[Mon May 20 01:28:36 2013] fullrun_mos2_xmm0160760201_pi300-10000_pass1_cl_src1.arf exists, delete to re-create
[Mon May 20 01:30:37 2013] Updating aperture counts using extracted products
[Mon May 20 01:30:37 2013] Total counts from fullrun_mos2_xmm0160760201_pi300-10000_pass1_cl_src1_src_b10.pi.gz = 597061.00
[Mon May 20 01:30:38 2013] Total counts from fullrun_mos2_xmm0160760201_pi300-10000_pass1_cl_src1_bgd.pi.gz = 108523.00
[Mon May 20 01:30:38 2013] Got source and background scale factors 14095650.000000, 486809958.000000
[Mon May 20 01:30:38 2013] User source parameters:
  Position = (278.4, 286.7) = 7 48 33.51 -67 45 7.9
  Extent = 12.1 (12.0-12.1)", rotation angle = 0
  Source aperture counts = 593918.7 +/- 773.7
  Background aperture counts = 3142.3
  Rate = 7 +/- 0.009

[Mon May 20 01:30:49 2013] Calculating source flux in energy range 0.30-8.00
[Mon May 20 01:30:49 2013] Using photon index=1.80, rate=5.26, arf fullrun_mos2_xmm0160760201_pi300-10000_pass1_cl_src1.arf
[Mon May 20 01:30:49 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Mon May 20 01:30:49 2013] Updating source flux to 5.2e-11
[Mon May 20 01:31:34 2013] xmm0160760201/analysis//spectral/fullrun_mos2_xmm0160760201_pi300-10000_pass1_cl_src1_pl.csv not found, spectral fit skipped or did not complete