[Mon May 20 00:50:35 2013] Detection parameters:
  Position = (395.4, 293.0) = 7 47 3.89 -67 44 40.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 593.6 +/- 31.1
  Background counts = 73.8
  Rate = 0.01 +/- 0.0007

[Mon May 20 00:50:38 2013] Off-axis axis estimate = 7.04'
[Mon May 20 00:51:22 2013] Using EEF radius (= 9.95 ")to estimate initial spatial extent for simple fitting
[Mon May 20 00:51:22 2013] Initial guess for spatial extent in simple fitting = 9.95"
[Mon May 20 00:51:22 2013] source mask rpix=2.3, npix_max = 31, mask sum = 30, frac = 0.966
[Mon May 20 00:51:22 2013] Giving source the simple spatial ID 1 for pass 0, mean size = 9.95"
[Mon May 20 00:51:23 2013] fullrun_mos1_xmm0160760201_pi300-10000_cl_pass0_src1.ximg exists
[Mon May 20 00:51:23 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0160760201_pi300-10000_cl_pass0_src1.csv
[Mon May 20 00:51:23 2013] fullrun_mos1_xmm0160760201_pi300-10000_cl_pass0_src1_1.ximg exists
[Mon May 20 00:51:23 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0160760201_pi300-10000_cl_pass0_src1.csv
[Mon May 20 00:51:23 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0160760201_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0160760201_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 20 00:51:24 2013] fullrun_mos1_xmm0160760201_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Mon May 20 00:51:24 2013] fullrun_mos1_xmm0160760201_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Mon May 20 00:51:24 2013] Fit fullrun_mos1_xmm0160760201_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Mon May 20 00:51:42 2013] Warning: source 1 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 3 at 12.489696 pixels away
[Mon May 20 00:51:42 2013] Vigneting correction estimate = 1.000000
[Mon May 20 00:51:42 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon May 20 00:51:42 2013] Assessing source extent using major
[Mon May 20 00:51:42 2013] Source does appear to be extended
[Mon May 20 00:51:42 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon May 20 00:52:18 2013] Using EEF radius (= 9.95 ")to estimate initial spatial extent for simple fitting
[Mon May 20 00:52:18 2013] Initial guess for spatial extent in simple fitting = 9.95"
[Mon May 20 00:52:18 2013] source mask rpix=2.3, npix_max = 31, mask sum = 30, frac = 0.966
[Mon May 20 00:52:18 2013] Giving source the simple spatial ID 1 for pass 1, mean size = 9.95"
[Mon May 20 00:52:18 2013] fullrun_mos1_xmm0160760201_pi300-10000_cl_pass1_src1.ximg exists
[Mon May 20 00:52:18 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0160760201_pi300-10000_cl_pass1_src1.csv
[Mon May 20 00:52:18 2013] fullrun_mos1_xmm0160760201_pi300-10000_cl_pass1_src1_1.ximg exists
[Mon May 20 00:52:18 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0160760201_pi300-10000_cl_pass1_src1.csv
[Mon May 20 00:52:18 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0160760201_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0160760201_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 20 00:52:19 2013] fullrun_mos1_xmm0160760201_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Mon May 20 00:52:19 2013] fullrun_mos1_xmm0160760201_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Mon May 20 00:52:19 2013] Fit fullrun_mos1_xmm0160760201_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Mon May 20 00:52:35 2013] Spatial fit model total counts = 1254.000000, observed total counts = 1254.000000
[Mon May 20 00:52:35 2013] Offset between fit and detection position for source 3 = 0.103659 pixels
[Mon May 20 00:52:35 2013] 1251.628000 total counts/ 823.047000 bgd. counts: snr = 14.938968
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 0.103659 pixels
  Position = (395.3, 293.0) = 7 47 3.97 -67 44 39.3
  Extent = 6.6 (6.0-7.4)", rotation angle = 0
  Source counts = 428.6 +/- 35.4
  Background counts = 823.0
  Rate = 0.005 +/- 0.0004
[Mon May 20 00:52:35 2013] Vigneting correction estimate = 1.000000
[Mon May 20 00:52:35 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon May 20 00:52:35 2013] Assessing source extent using major axis lower bound
[Mon May 20 00:52:35 2013] Source does appear to be extended
[Mon May 20 00:52:35 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon May 20 00:53:29 2013] XMMSAS src. selection expression = ellipse(34342.238160, 25442.863800, 394.663811, 394.663811, 0.000000, X, Y)
[Mon May 20 00:53:29 2013] Not overwriting source region fullrun_mos1_xmm0160760201_pi300-10000_pass1_cl_src3_src.reg
[Mon May 20 00:53:29 2013] Extracting stamp from image fullrun_mos1_xmm0160760201_pi300-10000_cl_sm2.00.img.gz, (373, 270) - (418, 316)
[Mon May 20 00:53:29 2013] XMMSAS bgd. selection expression = annulus(34342.238160, 25442.863800, 657.773019, 1315.546038, X, Y) && !ellipse(32429.026398, 25415.402771, 870.000000, 870.000000, 0.000000, X, Y)
[Mon May 20 00:53:29 2013] Writing fullrun_mos1_xmm0160760201_pi300-10000_pass1_cl_src3.gif
[Mon May 20 00:53:30 2013] ../../xmm0160760201/products/events/fullrun_mos1_xmm0160760201_pi300-10000_pass1_cl_src3_src.evt and ../../xmm0160760201/products/events/fullrun_mos1_xmm0160760201_pi300-10000_pass1_cl_src3_bgd.evt exist, delete to re-create
[Mon May 20 00:53:30 2013] Mean detx,y = (-4801.25, -9090.46) 
[Mon May 20 00:53:30 2013] ../../xmm0160760201/products/images/fullrun_mos1_xmm0160760201_pi300-10000_pass1_cl_src3_src.img and ../../xmm0160760201/products/images/fullrun_mos1_xmm0160760201_pi300-10000_pass1_cl_src3_bgd.img exist, delete to re-create
[Mon May 20 00:53:30 2013] ../../xmm0160760201/products/spectra/fullrun_mos1_xmm0160760201_pi300-10000_pass1_cl_src3_src_b10.pi.gz and ../../xmm0160760201/products/spectra/fullrun_mos1_xmm0160760201_pi300-10000_pass1_cl_src3_bgd.pi exist, delete to re-create
[Mon May 20 00:53:30 2013] Setting source spectrum file to fullrun_mos1_xmm0160760201_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Mon May 20 00:53:30 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0160760201_pi300-10000_pass1_cl_src3_bgd.pi.gz
[Mon May 20 00:53:30 2013] ../../xmm0160760201/products/lightcurves/fullrun_mos1_xmm0160760201_pi300-10000_pass1_cl_src3_src.lc and ../../xmm0160760201/products/lightcurves/fullrun_mos1_xmm0160760201_pi300-10000_pass1_cl_src3_bgd.lc exist, delete to re-create
[Mon May 20 01:30:26 2013] Updating aperture counts using extracted products
[Mon May 20 01:30:26 2013] Total counts from fullrun_mos1_xmm0160760201_pi300-10000_pass1_cl_src3_src_b10.pi.gz = 590.00
[Mon May 20 01:30:26 2013] Total counts from fullrun_mos1_xmm0160760201_pi300-10000_pass1_cl_src3_bgd.pi.gz = 1035.00
[Mon May 20 01:30:26 2013] Got source and background scale factors 492800.000000, 3892800.000000
[Mon May 20 01:30:26 2013] User source parameters:
  Position = (395.3, 293.0) = 7 47 3.97 -67 44 39.3
  Extent = 6.6 (6.0-7.4)", rotation angle = 0
  Source aperture counts = 459.0 +/- 25.3
  Background aperture counts = 131.0
  Rate = 0.005 +/- 0.0003

[Mon May 20 01:30:35 2013] Calculating source flux in energy range 0.30-8.00
[Mon May 20 01:30:35 2013] Using photon index=1.80, rate=0.00503, arf fullrun_mos1_xmm0160760201_pi300-10000_pass1_cl_src3.arf
[Mon May 20 01:30:35 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Mon May 20 01:30:35 2013] Updating source flux to 1.2e-13
[Mon May 20 01:30:59 2013] xmm0160760201/analysis//spectral/fullrun_mos1_xmm0160760201_pi300-10000_pass1_cl_src3_pl.csv not found, spectral fit skipped or did not complete