[Mon May 20 00:50:37 2013] Detection parameters:
  Position = (288.5, 196.7) = 7 48 25.77 -67 51 33.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 109.6 +/- 14.2
  Background counts = 86.3
  Rate = 0.001 +/- 0.0002

[Mon May 20 00:50:38 2013] Off-axis axis estimate = 7.41'
[Mon May 20 00:51:22 2013] Using EEF radius (= 10.13 ")to estimate initial spatial extent for simple fitting
[Mon May 20 00:51:22 2013] Initial guess for spatial extent in simple fitting = 10.13"
[Mon May 20 00:51:22 2013] source mask rpix=2.3, npix_max = 32, mask sum = 24, frac = 0.749
[Mon May 20 00:51:22 2013] Giving source the simple spatial ID 20 for pass 0, mean size = 10.13"
[Mon May 20 00:51:24 2013] fullrun_mos1_xmm0160760201_pi300-10000_cl_pass0_src20.ximg exists
[Mon May 20 00:51:24 2013] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0160760201_pi300-10000_cl_pass0_src20.csv
[Mon May 20 00:51:24 2013] fullrun_mos1_xmm0160760201_pi300-10000_cl_pass0_src20_1.ximg exists
[Mon May 20 00:51:24 2013] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0160760201_pi300-10000_cl_pass0_src20.csv
[Mon May 20 00:51:24 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0160760201_pi300-10000_cl_pass0_src20_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0160760201_pi300-10000_cl_pass0_src20.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 20 00:51:26 2013] fullrun_mos1_xmm0160760201_pi300-10000_cl_pass0_tfrozen_src20.ximg exists
[Mon May 20 00:51:26 2013] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0160760201_pi300-10000_cl_pass0_tfrozen_src20.csv
[Mon May 20 00:51:26 2013] fullrun_mos1_xmm0160760201_pi300-10000_cl_pass0_tfrozen_src20_1.ximg exists
[Mon May 20 00:51:26 2013] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0160760201_pi300-10000_cl_pass0_tfrozen_src20.csv
[Mon May 20 00:51:26 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0160760201_pi300-10000_cl_pass0_tfrozen_src20_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0160760201_pi300-10000_cl_pass0_tfrozen_src20.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 20 00:51:42 2013] Warning, spatial fit 20 centroid is now closest to src. 6
[Mon May 20 00:51:42 2013] Vigneting correction estimate = 1.000000
[Mon May 20 00:51:42 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon May 20 00:51:42 2013] Assessing source extent using major
[Mon May 20 00:51:42 2013] Source does appear to be extended
[Mon May 20 00:51:42 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon May 20 00:52:18 2013] Using EEF radius (= 10.13 ")to estimate initial spatial extent for simple fitting
[Mon May 20 00:52:18 2013] Initial guess for spatial extent in simple fitting = 10.13"
[Mon May 20 00:52:18 2013] source mask rpix=2.3, npix_max = 32, mask sum = 24, frac = 0.749
[Mon May 20 00:52:18 2013] Giving source the simple spatial ID 20 for pass 1, mean size = 10.13"
[Mon May 20 00:52:19 2013] fullrun_mos1_xmm0160760201_pi300-10000_cl_pass1_src20.ximg exists
[Mon May 20 00:52:19 2013] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0160760201_pi300-10000_cl_pass1_src20.csv
[Mon May 20 00:52:19 2013] fullrun_mos1_xmm0160760201_pi300-10000_cl_pass1_src20_1.ximg exists
[Mon May 20 00:52:19 2013] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0160760201_pi300-10000_cl_pass1_src20.csv
[Mon May 20 00:52:19 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0160760201_pi300-10000_cl_pass1_src20_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0160760201_pi300-10000_cl_pass1_src20.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 20 00:52:19 2013] fullrun_mos1_xmm0160760201_pi300-10000_cl_pass1_tfrozen_src20.ximg exists
[Mon May 20 00:52:19 2013] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0160760201_pi300-10000_cl_pass1_tfrozen_src20.csv
[Mon May 20 00:52:19 2013] fullrun_mos1_xmm0160760201_pi300-10000_cl_pass1_tfrozen_src20_1.ximg exists
[Mon May 20 00:52:19 2013] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0160760201_pi300-10000_cl_pass1_tfrozen_src20.csv
[Mon May 20 00:52:19 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0160760201_pi300-10000_cl_pass1_tfrozen_src20_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0160760201_pi300-10000_cl_pass1_tfrozen_src20.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 20 00:52:35 2013] Spatial fit model total counts = -1482.030000, observed total counts = 530.000000
[Mon May 20 00:52:35 2013] Poor agreement between spatial fit and data for source 23
It may help to tweak spatial fit manually
Not incorporating fit results
[Mon May 20 00:52:35 2013] Vigneting correction estimate = 1.000000
[Mon May 20 00:52:35 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon May 20 00:52:35 2013] Assessing source extent using major
[Mon May 20 00:52:35 2013] Source does appear to be extended
[Mon May 20 00:52:35 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon May 20 00:53:30 2013] XMMSAS src. selection expression = ellipse(25051.260193, 17062.311554, 652.500000, 652.500000, 0.000000, X, Y)
[Mon May 20 00:53:30 2013] Not overwriting source region fullrun_mos1_xmm0160760201_pi300-10000_pass1_cl_src23_src.reg
[Mon May 20 00:53:30 2013] Extracting stamp from image fullrun_mos1_xmm0160760201_pi300-10000_cl_sm2.00.img.gz, (251, 159) - (326, 234)
[Mon May 20 00:53:30 2013] XMMSAS bgd. selection expression = annulus(25051.260193, 17062.311554, 1087.500000, 2175.000000, X, Y) && !ellipse(23571.848663, 17187.228027, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22556.598000, 17998.018000, 1613.128046, 1613.128046, 0.000000, X, Y) && !ellipse(27626.442139, 14655.879288, 870.000000, 870.000000, 0.000000, X, Y)
[Mon May 20 00:53:30 2013] Writing fullrun_mos1_xmm0160760201_pi300-10000_pass1_cl_src23.gif
[Mon May 20 01:02:23 2013] Mean detx,y = (7015.99, -4597.13) 
[Mon May 20 01:02:25 2013] Setting backscal keywords in source and bgd. spectrum
[Mon May 20 01:02:41 2013] Binned source spectrum to 10 counts/bin
[Mon May 20 01:02:42 2013] Setting source spectrum file to fullrun_mos1_xmm0160760201_pi300-10000_pass1_cl_src23_src_b10.pi.gz
[Mon May 20 01:02:42 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0160760201_pi300-10000_pass1_cl_src23_bgd.pi.gz
[Mon May 20 01:26:52 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Mon May 20 01:26:52 2013] rmf not generated due to insufficient counts
[Mon May 20 01:30:32 2013] Updating aperture counts using extracted products
[Mon May 20 01:30:32 2013] Total counts from fullrun_mos1_xmm0160760201_pi300-10000_pass1_cl_src23_src_b10.pi.gz = 398.00
[Mon May 20 01:30:32 2013] Total counts from fullrun_mos1_xmm0160760201_pi300-10000_pass1_cl_src23_bgd.pi.gz = 1193.00
[Mon May 20 01:30:32 2013] Got source and background scale factors 914328.000000, 4148553.000000
[Mon May 20 01:30:32 2013] User source parameters:
  Position = (288.5, 196.7) = 7 48 25.77 -67 51 33.4
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 135.1 +/- 21.0
  Background aperture counts = 262.9
  Rate = 0.002 +/- 0.0002

[Mon May 20 01:30:32 2013] Updating counts from extracted products
[Mon May 20 01:30:32 2013] Set source signif. to 135.07/16.22 = 8.33
[Mon May 20 01:30:36 2013] Calculating source flux in energy range 0.30-8.00
[Mon May 20 01:30:36 2013] Using photon index=1.80, rate=0.00158, arf fullrun_mos1_xmm0160760201_pi300-10000_pass1_cl_src23.arf
[Mon May 20 01:30:36 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Mon May 20 01:30:36 2013] Updating source flux to 3.1e-14
[Mon May 20 01:30:53 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Mon May 20 01:30:59 2013] xmm0160760201/analysis//spectral/fullrun_mos1_xmm0160760201_pi300-10000_pass1_cl_src23_pl.csv not found, spectral fit skipped or did not complete