[Fri Jun 15 08:52:46 2012] Detection parameters:
  Position = (311.6, 408.7) = 10 44 44.97 -59 33 56.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 3182.0 +/- 68.3
  Background counts = 22.3
  Rate = 0.2 +/- 0.005

[Fri Jun 15 08:52:47 2012] Off-axis axis estimate = 8.05'
[Fri Jun 15 12:00:23 2012] Using EEF radius (= 10.46 ")to estimate initial spatial extent for simple fitting
[Fri Jun 15 12:00:23 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Jun 15 12:00:23 2012] Initial guess for spatial extent in simple fitting = 10.46"
[Fri Jun 15 12:00:23 2012] source mask rpix=2.4, npix_max = 33, mask sum = 30, frac = 0.890
[Fri Jun 15 12:00:23 2012] Giving source the simple spatial ID 3 for pass 0, mean size = 10.46"
[Fri Jun 15 15:15:18 2012] fullrun_mos2_xmm0160560301_pi300-10000_cl_pass0_src3.ximg exists
[Fri Jun 15 15:15:18 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0160560301_pi300-10000_cl_pass0_src3.csv
[Fri Jun 15 15:15:18 2012] fullrun_mos2_xmm0160560301_pi300-10000_cl_pass0_src3_1.ximg exists
[Fri Jun 15 15:15:18 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0160560301_pi300-10000_cl_pass0_src3.csv
[Fri Jun 15 15:15:18 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0160560301_pi300-10000_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0160560301_pi300-10000_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 15 15:15:20 2012] fullrun_mos2_xmm0160560301_pi300-10000_cl_pass0_tfrozen_src3.ximg exists
[Fri Jun 15 15:15:20 2012] fullrun_mos2_xmm0160560301_pi300-10000_cl_pass0_tfrozen_src3_1.ximg exists
[Fri Jun 15 15:15:20 2012] Fit fullrun_mos2_xmm0160560301_pi300-10000_cl_pass0_tfrozen_src3 appears to have run properly
[Fri Jun 15 15:15:45 2012] Warning, spatial fit 3 centroid is now closest to src. 17
[Fri Jun 15 15:15:45 2012] Vigneting correction estimate = 1.000000
[Fri Jun 15 15:15:45 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun 15 15:15:45 2012] Assessing source extent using major
[Fri Jun 15 15:15:45 2012] Source does appear to be extended
[Fri Jun 15 15:15:45 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun 15 18:16:39 2012] Using EEF radius (= 10.46 ")to estimate initial spatial extent for simple fitting
[Fri Jun 15 18:16:39 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Jun 15 18:16:39 2012] Initial guess for spatial extent in simple fitting = 10.46"
[Fri Jun 15 18:16:39 2012] source mask rpix=2.4, npix_max = 33, mask sum = 30, frac = 0.890
[Fri Jun 15 18:16:39 2012] Giving source the simple spatial ID 3 for pass 1, mean size = 10.46"
[Fri Jun 15 20:28:18 2012] fullrun_mos2_xmm0160560301_pi300-10000_cl_pass1_src3.ximg exists
[Fri Jun 15 20:28:18 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0160560301_pi300-10000_cl_pass1_src3.csv
[Fri Jun 15 20:28:18 2012] fullrun_mos2_xmm0160560301_pi300-10000_cl_pass1_src3_1.ximg exists
[Fri Jun 15 20:28:18 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0160560301_pi300-10000_cl_pass1_src3.csv
[Fri Jun 15 20:28:18 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0160560301_pi300-10000_cl_pass1_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0160560301_pi300-10000_cl_pass1_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 15 20:28:19 2012] fullrun_mos2_xmm0160560301_pi300-10000_cl_pass1_tfrozen_src3.ximg exists
[Fri Jun 15 20:28:19 2012] fullrun_mos2_xmm0160560301_pi300-10000_cl_pass1_tfrozen_src3_1.ximg exists
[Fri Jun 15 20:28:19 2012] Fit fullrun_mos2_xmm0160560301_pi300-10000_cl_pass1_tfrozen_src3 appears to have run properly
[Fri Jun 15 20:28:39 2012] Spatial fit model total counts = 3216.010000, observed total counts = 3216.000000
[Fri Jun 15 20:28:39 2012] Offset between fit and detection position for source 3 = 0.287803 pixels
[Fri Jun 15 20:28:39 2012] 3207.375000 total counts/ 848.785000 bgd. counts: snr = 80.956851
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 0.287803 pixels
  Position = (311.4, 408.5) = 10 44 45.07 -59 33 57.2
  Extent = 6.1 (5.8-6.3)", rotation angle = 0
  Source counts = 2358.6 +/- 56.6
  Background counts = 848.8
  Rate = 0.1 +/- 0.003
[Fri Jun 15 20:28:39 2012] Vigneting correction estimate = 1.000000
[Fri Jun 15 20:28:39 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun 15 20:28:39 2012] Assessing source extent using major axis lower bound
[Fri Jun 15 20:28:39 2012] Source does appear to be extended
[Fri Jun 15 20:28:39 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun 15 23:58:01 2012] Counts = 2358.590000, rescaling region sizes by 2.000000
[Fri Jun 15 23:58:01 2012] XMMSAS src. selection expression = ellipse(27041.836800, 35491.785400, 727.047621, 727.047621, 0.000000, X, Y)
[Fri Jun 15 23:58:01 2012] Writing source region out to fullrun_mos2_xmm0160560301_pi300-10000_pass1_cl_src3_src.reg
[Fri Jun 15 23:58:01 2012] Extracting stamp from image fullrun_mos2_xmm0160560301_pi300-10000_cl_sm2.00.img.gz, (270, 367) - (353, 450)
[Fri Jun 15 23:58:01 2012] XMMSAS bgd. selection expression = annulus(27041.836800, 35491.785400, 2423.492070, 4846.984139, X, Y) && !ellipse(32595.093170, 34750.480469, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28163.089400, 36692.005800, 536.585615, 353.660810, 359.839000, X, Y) && !ellipse(30404.497528, 36606.080444, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24574.995728, 37297.805847, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31374.931976, 36315.883087, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25247.967600, 30021.768400, 670.603219, 259.028807, 98.899000, X, Y) && !ellipse(21922.381180, 40996.272278, 870.000000, 870.000000, 0.000000, X, Y)
[Fri Jun 15 23:58:01 2012] Writing fullrun_mos2_xmm0160560301_pi300-10000_pass1_cl_src3.gif
[Sat Jun 16 00:01:03 2012] Mean detx,y = (-8319.71, -3148.88) 
[Sat Jun 16 00:01:04 2012] Setting backscal keywords in source and bgd. spectrum
[Sat Jun 16 00:01:35 2012] Binned source spectrum to 10 counts/bin
[Sat Jun 16 00:01:35 2012] Setting source spectrum file to fullrun_mos2_xmm0160560301_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Sat Jun 16 00:01:35 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0160560301_pi300-10000_pass1_cl_src3_bgd.pi.gz
[Sat Jun 16 01:06:56 2012] Updating aperture counts using extracted products
[Sat Jun 16 01:06:56 2012] Error reading totcts from fullrun_mos2_xmm0160560301_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Sat Jun 16 01:06:57 2012] Calculating source flux in energy range 0.30-8.00
[Sat Jun 16 01:06:57 2012] Using photon index=1.80, rate=0.126, arf fullrun_mos2_xmm0160560301_pi300-10000_pass1_cl_src3.arf
[Sat Jun 16 01:06:57 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Jun 16 01:06:57 2012] Updating source flux to 1.8e-12