[Fri Jun 15 08:52:18 2012] Detection parameters:
  Position = (424.4, 377.9) = 10 43 40.30 -59 36 10.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 47.0 +/- 11.1
  Background counts = 21.9
  Rate = 0.003 +/- 0.0006

[Fri Jun 15 08:52:19 2012] Off-axis axis estimate = 10.79'
[Fri Jun 15 09:30:58 2012] Using EEF radius (= 11.83 ")to estimate initial spatial extent for simple fitting
[Fri Jun 15 09:30:58 2012] Initial guess for spatial extent in simple fitting = 11.83"
[Fri Jun 15 09:30:58 2012] source mask rpix=2.7, npix_max = 41, mask sum = 42, frac = 1.014
[Fri Jun 15 09:30:58 2012] Giving source the simple spatial ID 40 for pass 0, mean size = 11.83"
[Fri Jun 15 12:00:22 2012] fullrun_mos1_xmm0160560301_pi300-10000_cl_pass0_src40.ximg exists
[Fri Jun 15 12:00:22 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0160560301_pi300-10000_cl_pass0_src40.csv
[Fri Jun 15 12:00:22 2012] fullrun_mos1_xmm0160560301_pi300-10000_cl_pass0_src40_1.ximg exists
[Fri Jun 15 12:00:22 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0160560301_pi300-10000_cl_pass0_src40.csv
[Fri Jun 15 12:00:22 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0160560301_pi300-10000_cl_pass0_src40_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0160560301_pi300-10000_cl_pass0_src40.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 15 12:00:23 2012] fullrun_mos1_xmm0160560301_pi300-10000_cl_pass0_tfrozen_src40.ximg exists
[Fri Jun 15 12:00:23 2012] fullrun_mos1_xmm0160560301_pi300-10000_cl_pass0_tfrozen_src40_1.ximg exists
[Fri Jun 15 12:00:23 2012] Fit fullrun_mos1_xmm0160560301_pi300-10000_cl_pass0_tfrozen_src40 appears to have run properly
[Fri Jun 15 15:15:33 2012] Source 40 is offset by -3.792353 and 6.681871 pixels which is larger than
2 X fitted extent = 1.352294 x 1.352294, not incorporating fit results
[Fri Jun 15 15:15:33 2012] Warning, spatial fit 40 centroid is now closest to src. 24
[Fri Jun 15 15:15:33 2012] Vigneting correction estimate = 1.000000
[Fri Jun 15 15:15:33 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun 15 15:15:33 2012] Assessing source extent using major
[Fri Jun 15 15:15:33 2012] Source does appear to be extended
[Fri Jun 15 15:15:33 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun 15 15:15:33 2012] Source is confused with source 24
[Fri Jun 15 16:19:18 2012] Using EEF radius (= 11.83 ")to estimate initial spatial extent for simple fitting
[Fri Jun 15 16:19:18 2012] Initial guess for spatial extent in simple fitting = 11.83"
[Fri Jun 15 16:19:18 2012] source mask rpix=2.7, npix_max = 41, mask sum = 42, frac = 1.014
[Fri Jun 15 16:19:18 2012] Giving source the simple spatial ID 35 for pass 1, mean size = 11.83"
[Fri Jun 15 18:16:38 2012] fullrun_mos1_xmm0160560301_pi300-10000_cl_pass1_src35.ximg exists
[Fri Jun 15 18:16:38 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0160560301_pi300-10000_cl_pass1_src35.csv
[Fri Jun 15 18:16:38 2012] fullrun_mos1_xmm0160560301_pi300-10000_cl_pass1_src35_1.ximg exists
[Fri Jun 15 18:16:38 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0160560301_pi300-10000_cl_pass1_src35.csv
[Fri Jun 15 18:16:38 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0160560301_pi300-10000_cl_pass1_src35_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0160560301_pi300-10000_cl_pass1_src35.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 15 18:16:39 2012] fullrun_mos1_xmm0160560301_pi300-10000_cl_pass1_tfrozen_src35.ximg exists
[Fri Jun 15 18:16:39 2012] fullrun_mos1_xmm0160560301_pi300-10000_cl_pass1_tfrozen_src35_1.ximg exists
[Fri Jun 15 18:16:39 2012] Fit fullrun_mos1_xmm0160560301_pi300-10000_cl_pass1_tfrozen_src35 appears to have run properly
[Fri Jun 15 20:28:29 2012] Spatial fit model total counts = 430.218000, observed total counts = 430.000000
[Fri Jun 15 20:28:29 2012] Offset between fit and detection position for source 40 = 8.468718 pixels
[Fri Jun 15 20:28:29 2012] 400.004000 total counts/ 242.718000 bgd. counts: snr = 10.095761
Spatial fit parameters:
  Offset between fit and detection position for source 40 = 8.468718 pixels
  Position = (431.4, 373.2) = 10 43 36.25 -59 36 29.5
  Extent = 23.7 (23.7-47.3)", rotation angle = 0
  Source counts = 157.3 +/- 20.0
  Background counts = 242.7
  Rate = 0.008 +/- 0.001
[Fri Jun 15 20:28:29 2012] Vigneting correction estimate = 1.000000
[Fri Jun 15 20:28:29 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun 15 20:28:29 2012] Assessing source extent using major axis lower bound
[Fri Jun 15 20:28:29 2012] Source does appear to be extended
[Fri Jun 15 20:28:29 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun 15 22:08:13 2012] XMMSAS src. selection expression = ellipse(37484.696000, 32418.388000, 1419.102041, 1419.102041, 0.000000, X, Y)
[Fri Jun 15 22:08:13 2012] Writing source region out to fullrun_mos1_xmm0160560301_pi300-10000_pass1_cl_src40_src.reg
[Fri Jun 15 22:08:13 2012] Extracting stamp from image fullrun_mos1_xmm0160560301_pi300-10000_cl_sm2.00.img.gz, (350, 292) - (513, 455)
[Fri Jun 15 22:08:13 2012] XMMSAS bgd. selection expression = annulus(37484.696000, 32418.388000, 2365.170068, 4730.340136, X, Y) && !ellipse(34255.142000, 36832.700000, 1025.072029, 1025.072029, 0.000000, X, Y) && !ellipse(32589.358307, 34754.590454, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35617.594532, 35959.990187, 674.884203, 356.647948, 68.321579, X, Y) && !ellipse(36682.262000, 36600.460200, 506.734415, 506.734415, 0.000000, X, Y) && !ellipse(33478.493103, 28501.831848, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34604.514000, 36553.720000, 2885.616083, 2885.616083, 0.000000, X, Y) && !ellipse(34166.307648, 33647.350311, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34272.442444, 35622.678833, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33012.876000, 38437.530000, 1982.280057, 1982.280057, 0.000000, X, Y) && !ellipse(36382.043800, 33098.610200, 1248.168036, 1248.168036, 0.000000, X, Y) && !ellipse(34731.730652, 37791.126221, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35707.732600, 34642.803000, 1301.776037, 1301.776037, 0.000000, X, Y) && !ellipse(34850.744995, 34870.312561, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33144.732025, 37072.635468, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34179.391632, 37873.519745, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36068.437012, 34525.371155, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35169.656494, 33066.427246, 870.000000, 870.000000, 0.000000, X, Y)
[Fri Jun 15 22:08:13 2012] Writing fullrun_mos1_xmm0160560301_pi300-10000_pass1_cl_src40.gif
[Fri Jun 15 22:21:57 2012] Mean detx,y = (-12963.47, 4657.21) 
[Fri Jun 15 22:21:58 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Jun 15 22:22:26 2012] Binned source spectrum to 10 counts/bin
[Fri Jun 15 22:22:26 2012] Setting source spectrum file to fullrun_mos1_xmm0160560301_pi300-10000_pass1_cl_src40_src_b10.pi.gz
[Fri Jun 15 22:22:26 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0160560301_pi300-10000_pass1_cl_src40_bgd.pi.gz
[Sat Jun 16 01:06:55 2012] Updating aperture counts using extracted products
[Sat Jun 16 01:06:55 2012] Error reading totcts from fullrun_mos1_xmm0160560301_pi300-10000_pass1_cl_src40_src_b10.pi.gz
[Sat Jun 16 01:06:56 2012] Calculating source flux in energy range 0.30-8.00
[Sat Jun 16 01:06:56 2012] Using photon index=1.80, rate=0.00841, arf fullrun_mos1_xmm0160560301_pi300-10000_pass1_cl_src40.arf
[Sat Jun 16 01:06:56 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Jun 16 01:06:56 2012] Updating source flux to 2.2e-13
[Sat Jun 16 01:06:59 2012] Flag b found in src. 40 procflags, skipping spectral fitting
[Sat Jun 16 01:06:59 2012] Flag c found in src. 40 procflags, skipping spectral fitting